Journal of Applied Research of Chemical -Polymer Engineering

Keyword Index

A

Abrasion Epoxy Modification by Polyurethane and Its Effects on Abrasion and Adhesion Properties [Volume 5, Issue 3, 2021, Pages 83-94]
Absorption Tower Investigation on Using Amine Split Flow to Reduce Maximum Temperature of the Fajr-Jam Refinery Absorption Tower for Control Corrosion Rate [Volume 4, Issue 2, 2020, Pages 107-117]
Acetylene Study of the effect of operating parameters on the performance of acetylene hydrogenation reactors [Volume 5, Issue 2, 2021, Pages 91-104]
Acid Experimental Investigation of Acidic Medium Effect on Seawater and Low Salinity Water for Wettability Alteration and Interfacial Tension Reduction: The Presence of Divalent and Trivalent Cations [Volume 7, Issue 1, 2023, Pages 47-59]
Acidic Gases Investigation on Using Amine Split Flow to Reduce Maximum Temperature of the Fajr-Jam Refinery Absorption Tower for Control Corrosion Rate [Volume 4, Issue 2, 2020, Pages 107-117]
Acidic oil Impact of Aqueous Phase Ion Type and Concentration on Calcite Surface Wettability and Acidic Oil-Brine IFT [Volume 4, Issue 2, 2020, Pages 19-34]
Acidic treatment Investigating of Treated Natural Zeolite as a Catalyst Support for Propane Oxidative Dehydrogenation Process [Volume 6, Issue 2, 2022, Pages 15-26]
Acidithiobacillus ferrooxidans Cu biorecovery from electronic wastes without daily pH adjusting using Acidithiobacillus ferrooxidans [Volume 2, Issue 1, 2018, Pages 57-65]
Acid-Thermal Method Antimicrobial properties of chitosan composite with activated bentonite against Aquaculture pathogenic bacteria: Aeromonas hydrophila [Volume 2, Issue 4, 2018, Pages 75-87]
Acid treatment Preparation of silica powder from rice husk by thermal treatment and comparison of its performance with commercial silica in blend of passenger radial tire belt [Volume 4, Issue 3, 2020, Pages 80-69]
Acrylic pressure-sensitive adhesive Preparation and Improvement of Shear Strength of a Water-Redispersible Waterborne Acrylic Adhesive for Making Cellulose Joints [Volume 3, Issue 1, 2019, Pages 47-57]
Activated carbon Investigation of Lignin-based activated carbon synthesis parameters on its structural properties [Volume 5, Issue 3, 2021, Pages 71-81]
Activated carbon Experimental investigation of Fe3O4 and Activated Carbon effect on the and heavy oil upgrading process by Electromagnetic heating [Volume 7, Issue 1, 2023, Pages 3-15]
Adhesion Study of the effect of resin additives and aerosil on the improvement of rubber to metal adhesion [Volume 2, Issue 1, 2018, Pages 67-77]
Adhesion Epoxy Modification by Polyurethane and Its Effects on Abrasion and Adhesion Properties [Volume 5, Issue 3, 2021, Pages 83-94]
Adhesion of rubber to fibers Study of operating conditions of silica extraction from rice husk for Special use in rubber [Volume 5, Issue 2, 2021, Pages 65-77]
Adhesive Epoxy Waste tire powder Silica Mechanical properties An Investigation on the Effect of Silica Filler and Waste Tire Powder Toughener on Mechanical and Thermal Properties of Epoxy Based Adhesives [Volume 2, Issue 2, 2018, Pages 57-73]
Adsorbent Removal of lead ions from aqueous solutions by adsorption operation: A review [Volume 3, Issue 1, 2019, Pages 3-28]
Adsorbent Fabrication of PVA/Gr/TiO2 adsorbent and study of its application in removal of malachite green [Volume 3, Issue 1, 2019, Pages 59-68]
Adsorbent Investigation of Lignin-based activated carbon synthesis parameters on its structural properties [Volume 5, Issue 3, 2021, Pages 71-81]
Adsorption Effect of hydrophobic modification of scleroglucan on its adsorption behavior onto carbonate rock surface of oil reservoir [Volume 2, Issue 3, 2018, Pages 51-64]
Adsorption Removal of lead ions from aqueous solutions by adsorption operation: A review [Volume 3, Issue 1, 2019, Pages 3-28]
Adsorption Fabrication of PVA/Gr/TiO2 adsorbent and study of its application in removal of malachite green [Volume 3, Issue 1, 2019, Pages 59-68]
Adsorption Removal of heavy metal zinc from aqueous solution by the alga Gracilaria corticata [Volume 4, Issue 1, 2020, Pages 51-43]
Adsorption Cr (VI) Adsorption Using synthesis Novel UIO-66-MnFe2O4-TiO2 Magnetic Nanoparticles by Experimental Design [Volume 4, Issue 4, 2020, Pages 33-48]
Adsorption Molecular Simulation of Poly (2-oxazoline) Adsorption on Graphene Nanosheet [Volume 6, Issue 3, 2022, Pages 29-39]
Adsorption Removal of Iodide from Wastewater Using Strongly Basic Anion Resin [Volume 7, Issue 2, 2023, Pages 31-46]
Adsorption Removal of Lead Metal Ion from Aqueous Solution with Fe3O4@SiO2 Core-Shell Magnetic Nanoadsorbent Functionalized with Polyvinyl Alcohol [Volume 8, Issue 1, 2024, Pages 12-25]
Adsorption Application of Fe3O4@SiO2 nanoparticles functionalized with glucosamine molecules as an adsorbent in removing cadmium ion [Volume 8, Issue 3, 2024, Pages 29-39]
Adsorption isotherm Experimental Investigation and Modeling of AOT Surfactant Adsorption on Carbonate Rock Particles [Volume 3, Issue 3, 2019, Pages 39-50]
Adsorption kinetics EDTA-functionalized Fe3O4@SiO2 magnetic nanoadsorbent for divalent cadmium removal from aqueous solutions [Volume 5, Issue 3, 2021, Pages 95-106]
Aerogel blanket Synthesis and properties of super hydrophobic silica aerogel/basalt fibers blanket by ambient drying method [Volume 1, Issue 1, 2017, Pages 31-38]
Aeromonas hydrophila Antimicrobial properties of chitosan composite with activated bentonite against Aquaculture pathogenic bacteria: Aeromonas hydrophila [Volume 2, Issue 4, 2018, Pages 75-87]
Aerosil Study of the effect of resin additives and aerosil on the improvement of rubber to metal adhesion [Volume 2, Issue 1, 2018, Pages 67-77]
Air separation Investigation of different methods of increasing membrane performance for oxygen/nitrogen separation [Volume 6, Issue 2, 2022, Pages 27-54]
Albumin magnetic nanoparticles The effect of 5-fluorouracil loaded albumin magnetic nanoparticles on viability and cell cycle of human breast cancer MCF-7 cell line [Volume 5, Issue 1, 2021, Pages 31-41]
Alkaline extraction Study of operating conditions of silica extraction from rice husk for Special use in rubber [Volume 5, Issue 2, 2021, Pages 65-77]
Alkanolamine Modeling Viscosity of Ionic Liquids and Akanolamines Mixtures Using Peng-Robinson and Soave-Redlich-Kwong Equation of States with Friction Theory [Volume 5, Issue 4, 2021, Pages 39-54]
Alkylation of m‐Cresol Applying Artificial Neural Network in Prediction behavior of alkylation of m-Cresol with isopropanol process and yield optimization by Bee Colony algorithm [Volume 5, Issue 4, 2021, Pages 69-78]
Aloe vera Design, fabrication and characterization of electrospun wound dressing composed of polyvinyl alcohol/Aloe Vera [Volume 4, Issue 2, 2020, Pages 83-93]
Alumina Increase Heat Conductivity of Bladder and Calculate its Effect on Temperature Profile of the Tire in the Curing Process [Volume 3, Issue 3, 2019, Pages 93-105]
Alumina Rheology and Chemorheology Behavior of Alumina/Polysaccharide Suspensions in Ceramic Membranes Production [Volume 8, Issue 1, 2024, Pages 51-57]
Aluminum The Effect of JP4 on Friction between NBR and Aluminum in Different Roughness [Volume 2, Issue 1, 2018, Pages 19-29]
Amberlite IR400 Cl Removal of Iodide from Wastewater Using Strongly Basic Anion Resin [Volume 7, Issue 2, 2023, Pages 31-46]
Amines Investigation on Using Amine Split Flow to Reduce Maximum Temperature of the Fajr-Jam Refinery Absorption Tower for Control Corrosion Rate [Volume 4, Issue 2, 2020, Pages 107-117]
Ammonium Fluoride The role of hierarchical Y zeolites on the catalyst performance of diesel Hydrodesulfurization Process [Volume 5, Issue 3, 2021, Pages 37-27]
Amorphous silica Preparation of silica powder from rice husk by thermal treatment and comparison of its performance with commercial silica in blend of passenger radial tire belt [Volume 4, Issue 3, 2020, Pages 80-69]
Antibacterial properties Preparation and study of physical and mechanical behavior of polylactic acid bionanocomposites reinforced with Cellulose Nanocrystal and silver nanoparticles [Volume 5, Issue 3, 2021, Pages 25-13]
Antibacterial Property Design, fabrication and characterization of electrospun wound dressing composed of polyvinyl alcohol/Aloe Vera [Volume 4, Issue 2, 2020, Pages 83-93]
Anti-cancer drug Determination of the solubility of anticancer drugs in supercritical carbon dioxide using empirical models and artificial neural network [Volume 5, Issue 4, 2021, Pages 15-37]
Antimicrobial effect Antimicrobial properties of chitosan composite with activated bentonite against Aquaculture pathogenic bacteria: Aeromonas hydrophila [Volume 2, Issue 4, 2018, Pages 75-87]
Aqueous solution Removal of heavy metal zinc from aqueous solution by the alga Gracilaria corticata [Volume 4, Issue 1, 2020, Pages 51-43]
Artificial Gas Lift Optimum allocation of carbon dioxide and nitrogen gas between wells of an oil field in the artificial gas lift process [Volume 7, Issue 2, 2023, Pages 59-71]
Aspen Plus Software Process Design and Economic Analysis of Power Generation from Flare Gases of South Pars Gas Refinery (phase 22-24) [Volume 7, Issue 4, 2023, Pages 95-107]
Aspergillus niger Evaluating the Metabolic Activity of Aspergillus niger for Organic Acid Production Considering the Impact of Small Molecules in Culture Media [Volume 7, Issue 3, 2023, Pages 49-66]
Asphaltene Experimental Study of the Effect of Microwave and Ultrasonic Waves on the Upgrading and Asphaltene Content of Heavy Crude Oil [Volume 7, Issue 4, 2023, Pages 3-14]
Asphaltene Particles Modeling of asphaltene particle size distribution in well using DEM-CFD [Volume 4, Issue 2, 2020, Pages 69-82]
Asphaltene Precipitation Statistical Modeling and Optimization of the Effective Parameters in Precipitation of Asphaltene from Vacuum Residue by Industrial Solvents [Volume 4, Issue 4, 2020, Pages 3-21]
Azeotropic distillation Development of an adaptive soft sensor for real-time monitoring of gas composition: Implementation on the azeotropic distillation column of the vinyl acetate monomer production process [Volume 8, Issue 3, 2024, Pages 17-28]
Azodicarbonamide (ADC) Effect of carbon black on morphological and mechanical properties of rubber foams produced by a single-step method [Volume 1, Issue 1, 2017, Pages 49-60]

B

Bacterial cellulose Fabrication of nanocomposite scaffold based on bacterial cellulose/zinc oxide nanoparticles/polypyrrole with antibacterial and cytotoxicity assessment [Volume 5, Issue 2, 2021, Pages 37-50]
Bed height Fixedâbed column studies of nitrate ion adsorption using modified montmorillonite adsorbent [Volume 4, Issue 4, 2020, Pages 89-105]
Bee Colony Algorithm Applying Artificial Neural Network in Prediction behavior of alkylation of m-Cresol with isopropanol process and yield optimization by Bee Colony algorithm [Volume 5, Issue 4, 2021, Pages 69-78]
Bentonite Optimization of PVA/Nano-Bentonite Nanofiber Composite Production for Improving Mechanical and Thermal Properties [Volume 2, Issue 2, 2018, Pages 17-28]
Bentonite Antimicrobial properties of chitosan composite with activated bentonite against Aquaculture pathogenic bacteria: Aeromonas hydrophila [Volume 2, Issue 4, 2018, Pages 75-87]
Benzoyl peroxide Crosslinking Poly(Îµ-caprolactone) with benzoyl peroxide by thermal method for making radiotherapy masks [Volume 6, Issue 2, 2022, Pages 55-68]
Binder Investigation the effect of NCO/OH ratio, amount and type of curing catayst on the Pot life of HTPB based binder system [Volume 2, Issue 3, 2018, Pages 65-76]
Binder System Chemorheological Investigation on The Effect of Three Polymerization Retardants on Hydroxyl Terminated Poly butadiene-based Polyurethane-Forming Rate [Volume 7, Issue 1, 2023, Pages 17-31]
Bioactive glass Optimization of Gelatin/PEG Scaffold with Zn/Mg Doped Bioactive Ceramic Glass Using Response Surface Method (RSM) [Volume 8, Issue 1, 2024, Pages 36-50]
Bioactivity Bioactive rod-like nanoparticles as novel filler for improving the properties of supramolecular polyester: synthesis and application [Volume 5, Issue 3, 2021, Pages 57-69]
Biocompatibility Fabrication of nanocomposite scaffold based on bacterial cellulose/zinc oxide nanoparticles/polypyrrole with antibacterial and cytotoxicity assessment [Volume 5, Issue 2, 2021, Pages 37-50]
Biodegradable blends Optimization of ternary blends based on poly (lactic acid) according to physical and biological properties [Volume 4, Issue 1, 2020, Pages 66-53]
Bio-hydrogen Substrate concentration control in a bio-reactor for bio-hydrogen production via feedback linearization [Volume 5, Issue 4, 2021, Pages 91-103]
Bioleaching Cu biorecovery from electronic wastes without daily pH adjusting using Acidithiobacillus ferrooxidans [Volume 2, Issue 1, 2018, Pages 57-65]
Bioleaching Utilizing Yarrowia lipolytica supernatant for electric arc furnace dust bioleaching [Volume 7, Issue 2, 2023, Pages 3-16]
Bioleaching A Review on Lithium Bioleaching from Solid Resources [Volume 8, Issue 3, 2024, Pages 1-16]
Biological removal Removal of Hydrogen Sulfide [Volume 3, Issue 1, 2019, Pages 29-46]
Biomass Study of operating conditions of silica extraction from rice husk for Special use in rubber [Volume 5, Issue 2, 2021, Pages 65-77]
Bionanocomposites Preparation and study of physical and mechanical behavior of polylactic acid bionanocomposites reinforced with Cellulose Nanocrystal and silver nanoparticles [Volume 5, Issue 3, 2021, Pages 25-13]
Bio-reactor Substrate concentration control in a bio-reactor for bio-hydrogen production via feedback linearization [Volume 5, Issue 4, 2021, Pages 91-103]
Biosorption Fixedâbed column studies of U(VI) biosorption using Pseudomonas putida â Chitosan hybrid biosorbent [Volume 3, Issue 2, 2019, Pages 68-81]
Biosurfactants A Comparison Between Performance of Produced Biosurfactant and Conventional Chemical Surfactants in Enhanced Heavy Oil Recovery [Volume 3, Issue 1, 2019, Pages 69-80]
Bivalent cadmium EDTA-functionalized Fe3O4@SiO2 magnetic nanoadsorbent for divalent cadmium removal from aqueous solutions [Volume 5, Issue 3, 2021, Pages 95-106]
Bivalent cadmium Fe3O4@SiO2 magnetic core-shell nanoparticles functionalized with 1,4-dihydroxyanthraquinone as an effective and recyclable adsorbent for the removal of divalent cadmium from aqueous solutions [Volume 7, Issue 3, 2023, Pages 3-17]
Black Liquor Investigation of Lignin-based activated carbon synthesis parameters on its structural properties [Volume 5, Issue 3, 2021, Pages 71-81]
Blending Epoxy Modification by Polyurethane and Its Effects on Abrasion and Adhesion Properties [Volume 5, Issue 3, 2021, Pages 83-94]
Blend membrane Investigation of performance of Pebax/ Poly(vinyl alcohol) blend membrane for carbon dioxide separation from nitrogen [Volume 3, Issue 4, 2019, Pages 57-71]
Boiler Modeling the Application of Steam Produced by a Boiler-based Waste Incinerator to Disable Catalyst in the Production of Linear Polyethylene (LLDPE) in Lorestan Petrochemical Complex [Volume 3, Issue 1, 2019, Pages 81-92]
Boiler feed water Control of flooding phenomena in vacuum distillation tray column using operational and laboratory parameters [Volume 5, Issue 2, 2021, Pages 51-63]
Brenda database Applying a system-oriented method for culture medium design to improve bio-ethanol production by synechocystis [Volume 3, Issue 2, 2019, Pages 55-67]
Burner Modeling the Application of Steam Produced by a Boiler-based Waste Incinerator to Disable Catalyst in the Production of Linear Polyethylene (LLDPE) in Lorestan Petrochemical Complex [Volume 3, Issue 1, 2019, Pages 81-92]
Burning rate catalysts Poly (Vinyl Ferrocene)/Hydroxyl terminated polybutadiene (PVF/HTPB) blend as a Catalyst: Preparation, Characterization and Comparison [Volume 5, Issue 4, 2021, Pages 79-90]

C

Calcination A 2-Dim CFD model development for petroleum coke calcination process in rotary kiln [Volume 6, Issue 4, 2022, Pages 57-68]
Calcium chloride Study on Stability of Laponite Nanoparticles Suspensions in Electrolyte Media [Volume 1, Issue 2, 2017, Pages 25-37]
Carbon aerogel Effect of Coal Tar Pitch on Improvement of Thermal Insulation Performance of Carbon Aerogels Based on Novolac Resin [Volume 2, Issue 4, 2018, Pages 53-64]
Carbonate Rock Experimental Investigation and Modeling of AOT Surfactant Adsorption on Carbonate Rock Particles [Volume 3, Issue 3, 2019, Pages 39-50]
Carbon black Effect of carbon black on morphological and mechanical properties of rubber foams produced by a single-step method [Volume 1, Issue 1, 2017, Pages 49-60]
Carbon black Toner production by in situ emulsion polymerization: Investigation of the effect of reaction temperature and stirrer speed [Volume 6, Issue 1, 2022, Pages 3-14]
Carbon Dioxide Modeling of Carbon Dioxide Replacement in Methane Hydrate Structure [Volume 4, Issue 1, 2020, Pages 42-31]
Carbon Dioxide Optimum allocation of carbon dioxide and nitrogen gas between wells of an oil field in the artificial gas lift process [Volume 7, Issue 2, 2023, Pages 59-71]
Carbon dioxide separation Performance evaluation of Pebax/ deep eutectic solvent supported liquid membrane in carbon dioxide separation [Volume 8, Issue 2, 2024, Pages 13-23]
Casing Temperature Changes in Oil Wells and Its Effect on Tubulars Stress Condition [Volume 5, Issue 3, 2021, Pages 12-3]
Casting Temperature Effect of Curing Agent, Temperature, and Catalyst on Physical-Mechanical Properties of HTPB-Based Highly-filled Composite [Volume 3, Issue 4, 2019, Pages 25-42]
Catalyst Investigation the effect of NCO/OH ratio, amount and type of curing catayst on the Pot life of HTPB based binder system [Volume 2, Issue 3, 2018, Pages 65-76]
Catalyst Modeling the Application of Steam Produced by a Boiler-based Waste Incinerator to Disable Catalyst in the Production of Linear Polyethylene (LLDPE) in Lorestan Petrochemical Complex [Volume 3, Issue 1, 2019, Pages 81-92]
Catalyst Synthesis and Characterization of CexZr1-xO2 using Supercritical Water [Volume 3, Issue 4, 2019, Pages 3-12]
Catalyst Kinetic study of xylene isomerization reaction with Mo-Pt @ZSM5 catalyst [Volume 6, Issue 4, 2022, Pages 43-56]
Catalyst Synthesis and evaluation of Mn-Fe-Ce mixed oxide catalysts in lean methane combustion reactionon reaction [Volume 8, Issue 2, 2024, Pages 64-72]
Cationic-Polyacrylamide Cationic PolyAcrylamide/Cellulose Nanofibril Polyelectrolytes Effect on Suspension and Network Properties of Packaging Recycled fibers [Volume 5, Issue 1, 2021, Pages 3-15]
Cellulose nanocrystals Preparation and study of physical and mechanical behavior of polylactic acid bionanocomposites reinforced with Cellulose Nanocrystal and silver nanoparticles [Volume 5, Issue 3, 2021, Pages 25-13]
Cellulose-Nanofibril Cationic PolyAcrylamide/Cellulose Nanofibril Polyelectrolytes Effect on Suspension and Network Properties of Packaging Recycled fibers [Volume 5, Issue 1, 2021, Pages 3-15]
Ceramic membrane Rheology and Chemorheology Behavior of Alumina/Polysaccharide Suspensions in Ceramic Membranes Production [Volume 8, Issue 1, 2024, Pages 51-57]
Cerium Synthesis and evaluation of Mn-Fe-Ce mixed oxide catalysts in lean methane combustion reactionon reaction [Volume 8, Issue 2, 2024, Pages 64-72]
Cerium‌(IV) Solvent extraction of Ce(IV) from sulfuric acid solutions using Cyanex 921 and its mixtures with D2EHPA [Volume 5, Issue 1, 2021, Pages 87-103]
Cerium Oxide Effect of In-Situ Synthesized Cerium Oxide Nanoparticles on Oil Recovery Factor In a Glass Micromodel [Volume 6, Issue 2, 2022, Pages 3-14]
CFD A 2-Dim CFD model development for petroleum coke calcination process in rotary kiln [Volume 6, Issue 4, 2022, Pages 57-68]
Chemical Engineering The degree of conformity of research subjects in the chemical engineering in Shahid Chamran University with Iran and the world [Volume 7, Issue 4, 2023, Pages 33-45]
Chemical performance Numerical-parametrical analysis on the hydrogen peroxide catalyst bed for space monopropellant thruster applications [Volume 1, Issue 2, 2017, Pages 15-24]
Chitin-glucan polysaccharide A Study of growth and chitin-Glucan complex production kinetics in submerged culture of medicinal fungus Ganoderma lucidum [Volume 2, Issue 1, 2018, Pages 31-43]
Chitosan Design of Magnetic Chitosan nanoparticles for Targeted Cancer Therapy using 5-Fluorouracil in Glycerol-Moonoleate [Volume 2, Issue 1, 2018, Pages 45-56]
Chitosan Synthesis and evaluation of cytotoxicity of hybrid hydrogel based on chitosan and Ph.ZnO@HAP nanocomposite [Volume 2, Issue 4, 2018, Pages 19-31]
Chitosan Water Uptake Improvement in Hygiene Papers by NanoHydrogel Prepared from Chitosan/Nano silver/ PolyAcrylic Acid Composite [Volume 3, Issue 3, 2019, Pages 51-60]
Chitosan Design and optimization of metformin released from ZnO/Chitosan nanocomposite [Volume 4, Issue 3, 2020, Pages 42-27]
Chitosan Composite Antimicrobial properties of chitosan composite with activated bentonite against Aquaculture pathogenic bacteria: Aeromonas hydrophila [Volume 2, Issue 4, 2018, Pages 75-87]
Chitosan-galic acid Exploring the performance of a composite membrane with a nanometer-thin selective layer of chitosan-gallic acid for the separation of carbon dioxide [Volume 7, Issue 4, 2023, Pages 47-61]
Clay Nanoparticles Feasibility Study and Microscopic Investigation of the Mechanism of Enhanced Oil Recovery Process Using Injection of Clay Nanoparticles into the Glass Micromodel [Volume 2, Issue 2, 2018, Pages 41-56]
Closed cell foam Effect of carbon black on morphological and mechanical properties of rubber foams produced by a single-step method [Volume 1, Issue 1, 2017, Pages 49-60]
CO2 Direct Synthesis of Liquefied Petroleum Gas from Carbon Dioxide Using Modified SBA-15 Hybrid Catalyst [Volume 6, Issue 4, 2022, Pages 33-42]
CO2 Adsorption Effect of Graphite Source on Pore Structure and CO2 Adsorption of Graphene Aerogel [Volume 7, Issue 3, 2023, Pages 19-28]
CO2/CH4 separation Fabrication of nanocomposite membrane based on polyether block amide/polyvinyl alcohol filled with magnesium oxide nanoparticles in order to investigate selective permeability properties [Volume 7, Issue 1, 2023, Pages 73-85]
CO2/N2 separation Investigation of performance of Pebax/ Poly(vinyl alcohol) blend membrane for carbon dioxide separation from nitrogen [Volume 3, Issue 4, 2019, Pages 57-71]
CO2 separation Exploring the performance of a composite membrane with a nanometer-thin selective layer of chitosan-gallic acid for the separation of carbon dioxide [Volume 7, Issue 4, 2023, Pages 47-61]
CO2 separation Molecular simulation of phenol-containing poly(ether-block-amide) membrane for carbon dioxide separation from nitrogen [Volume 8, Issue 2, 2024, Pages 24-33]
Coal tar Control of flooding phenomena in vacuum distillation tray column using operational and laboratory parameters [Volume 5, Issue 2, 2021, Pages 51-63]
Coal tar pitch Effect of Coal Tar Pitch on Improvement of Thermal Insulation Performance of Carbon Aerogels Based on Novolac Resin [Volume 2, Issue 4, 2018, Pages 53-64]
Co-flow Preparation of Poly(dimethylsiloxane) Microparticles via a Co-flow Microfluidic Device and Investigation of Various Parameters Effect on Morphology [Volume 4, Issue 3, 2020, Pages 26-15]
Coking value index Control of flooding phenomena in vacuum distillation tray column using operational and laboratory parameters [Volume 5, Issue 2, 2021, Pages 51-63]
Collision frequency Experimental study of Crude Oil demulsification by Demulsifier and process modeling by modification of Collision Frequency Function in Population Balance Equation [Volume 1, Issue 2, 2017, Pages 67-80]
Color properties Toner production by in situ emulsion polymerization: Investigation of the effect of reaction temperature and stirrer speed [Volume 6, Issue 1, 2022, Pages 3-14]
Completion Temperature Changes in Oil Wells and Its Effect on Tubulars Stress Condition [Volume 5, Issue 3, 2021, Pages 12-3]
Composite Experimental Study of Polyvinyl Acetate / Diamond Nanocomposites [Volume 4, Issue 1, 2020, Pages 118-109]
Composite Exploring the performance of a composite membrane with a nanometer-thin selective layer of chitosan-gallic acid for the separation of carbon dioxide [Volume 7, Issue 4, 2023, Pages 47-61]
Compression set Optimization of tear resistance and compression set at rubber spring based on EPDM/NR alloy [Volume 4, Issue 1, 2020, Pages 107-91]
Computational Fluid Dynamics Modeling of asphaltene particle size distribution in well using DEM-CFD [Volume 4, Issue 2, 2020, Pages 69-82]
Comsol Multiphysics Simulation of Hydrogel Injection in Micro-Model and Prediction of Oil Recovery Factor [Volume 5, Issue 4, 2021, Pages 3-13]
Conductive Polymer Composites (CPC) Based Detector a of Development and Design for Composite CNT)/Acid Lactic(Poly on Compounds Organic Volatile of Detecti [Volume 3, Issue 4, 2019, Pages 43-56]
Contact angle Study on adsorption behavior of dilute polymeric systems based on sulfonated polyacrylamide for improving oil recovery application [Volume 1, Issue 1, 2017, Pages 5-16]
Contact angle Experimental Study of Polyvinyl Acetate / Diamond Nanocomposites [Volume 4, Issue 1, 2020, Pages 118-109]
Continuous phase Experimental study of the mass transfer effect on the hydrodynamics of single drops in the chemical system of normal butanol/succinic acid/water [Volume 8, Issue 2, 2024, Pages 34-42]
Controlled drug delivery Design and optimization of metformin released from ZnO/Chitosan nanocomposite [Volume 4, Issue 3, 2020, Pages 42-27]
Controlled radical polymerization Investigation of the Effect of Poly(vinyl chloride)-g-Poly(butyl acrylate) Brush Copolymer as Plasticizer on the Performance of the Poly(vinyl chloride) Films [Volume 8, Issue 4, 2024, Pages 1-11]
Convective heat transfer coefficient Experimental investigating the effect of adding of graphene on the improvement of convective heat transfer coefficient of water/ethylene glycol system in laminar flow [Volume 2, Issue 3, 2018, Pages 3-19]
Cooling Methods The Effects of Cooling Method on Final Mechanical and Thermal Properties of Polyethylene Tanks Manufactured by Rotational Molding [Volume 4, Issue 4, 2020, Pages 23-31]
Copolymer Investigation of the Effect of Poly(vinyl chloride)-g-Poly(butyl acrylate) Brush Copolymer as Plasticizer on the Performance of the Poly(vinyl chloride) Films [Volume 8, Issue 4, 2024, Pages 1-11]
Copper anod slimes Leaching and recovery of selenium from Sar-cheshmeh copper anode slimes [Volume 5, Issue 1, 2021, Pages 57-67]
Coprolysis Effect of Size of tire parts and Mazut Addition on Simultaneous Pyrolysis of Used Tire and Mazut [Volume 3, Issue 4, 2019, Pages 13-24]
Core-shell Removal of nickel ions from aqueous solutions using theophylline-functionalized Fe3O4@SiO2 magnetic nanoparticles [Volume 8, Issue 3, 2024, Pages 40-49]
Core-shell nanoparticles Application of Fe3O4@SiO2 nanoparticles functionalized with glucosamine molecules as an adsorbent in removing cadmium ion [Volume 8, Issue 3, 2024, Pages 29-39]
Correlation relations Investigation of effective parameters on synthesis of Goethite with solution oxidation method in the laboratory scale [Volume 6, Issue 4, 2022]
Corrosion Investigation on Using Amine Split Flow to Reduce Maximum Temperature of the Fajr-Jam Refinery Absorption Tower for Control Corrosion Rate [Volume 4, Issue 2, 2020, Pages 107-117]
Corrosion of Epoxy Coating Optimization of anti- Corrosion of Epoxy/Zinc Phosphate and Nano Silica coating [Volume 4, Issue 2, 2020, Pages 35-51]
Corticata species Removal of heavy metal zinc from aqueous solution by the alga Gracilaria corticata [Volume 4, Issue 1, 2020, Pages 51-43]
Coupling agent Lifetime Prediction of EPDM Rubber Seals Using Time-Temperature Superposition Principle and the Effect of Nanoparticles Loading on It [Volume 7, Issue 3, 2023, Pages 29-48]
Cr-based catalysts Evaluation of propane dehydrogenation catalysts: catalyst development, chemistry, and challenges [Volume 7, Issue 2, 2023, Pages 17-37]
Crosslinking reactions Assessingthe crosslinking behavior of nanocomposites based on epoxy and starch-modified graphene oxide nanosheets potent to be applied as engineering coatings [Volume 1, Issue 1, 2017, Pages 61-70]
Crude glycerol Utilizing Yarrowia lipolytica supernatant for electric arc furnace dust bioleaching [Volume 7, Issue 2, 2023, Pages 3-16]
Crude oil Effect of SiO2 nanoparticles on wax formation, morphology, and rheological behavior in crude oil:An experimental study [Volume 6, Issue 1, 2022, Pages 33-48]
Cr(VI) Cr (VI) Adsorption Using synthesis Novel UIO-66-MnFe2O4-TiO2 Magnetic Nanoparticles by Experimental Design [Volume 4, Issue 4, 2020, Pages 33-48]
Crystallinity Investigation on microstructure, morphology, and tensile properties of polypropylene/graphene nanoplatelets nanocomposite fiber in the presence of compatibilizer [Volume 4, Issue 1, 2020, Pages 30-13]
Crystallization Effect of SiO2 nanoparticles on wax formation, morphology, and rheological behavior in crude oil:An experimental study [Volume 6, Issue 1, 2022, Pages 33-48]
CuBTC Statistical modeling and optimization of low-temperature oxidation dehydrogenation of propane process using manganese catalyst based on CuBTC organic metal framework [Volume 6, Issue 1, 2022, Pages 15-32]
Cumulative rate Ultrasonic Assisted Enhanced Oil Recovery Process: Numerical Analysis [Volume 6, Issue 4, 2022, Pages 69-82]
CuO/TiO2/PAM Concentration-Behavioral, Adsorption, Flooding, Relative Permeability Studies of Polymer Nanocomposite in Two Reservoir Lithologies [Volume 5, Issue 1, 2021, Pages 69-86]
Cu recovery Cu biorecovery from electronic wastes without daily pH adjusting using Acidithiobacillus ferrooxidans [Volume 2, Issue 1, 2018, Pages 57-65]
Cushion gas Effect of Operating Parameters on the Injection of Carbon Dioxide and Sour Gas as Cushion Gas in the Process of Underground Hydrogen Gas Storage [Volume 8, Issue 1, 2024, Pages 3-11]
Cushion gas Underground Hydrogen Storage in the Presence of Cushion Gas: Investigation of Cushion Gas Properties, Reservoir, and Operational Parameters [Volume 8, Issue 2, 2024, Pages 43-63]
Cu-Zn/ZrO2 catalyst Prediction of conversion and products yields in steam reforming of methanol over Cu-Zn/ZrO2 catalyst using Artificial Intelligence methods [Volume 6, Issue 3, 2022, Pages 41-59]
Cyanex 921 Solvent extraction of Ce(IV) from sulfuric acid solutions using Cyanex 921 and its mixtures with D2EHPA [Volume 5, Issue 1, 2021, Pages 87-103]
Cytotoxicity Synthesis and evaluation of cytotoxicity of hybrid hydrogel based on chitosan and Ph.ZnO@HAP nanocomposite [Volume 2, Issue 4, 2018, Pages 19-31]

D

D2EHPA Solvent extraction of Ce(IV) from sulfuric acid solutions using Cyanex 921 and its mixtures with D2EHPA [Volume 5, Issue 1, 2021, Pages 87-103]
DBTDL catalyst Effect of Curing Agent, Temperature, and Catalyst on Physical-Mechanical Properties of HTPB-Based Highly-filled Composite [Volume 3, Issue 4, 2019, Pages 25-42]
Deactivation Direct Synthesis of Liquefied Petroleum Gas from Carbon Dioxide Using Modified SBA-15 Hybrid Catalyst [Volume 6, Issue 4, 2022, Pages 33-42]
Dealumination The role of hierarchical Y zeolites on the catalyst performance of diesel Hydrodesulfurization Process [Volume 5, Issue 3, 2021, Pages 37-27]
Deep Eutectic Solvent Performance evaluation of Pebax/ deep eutectic solvent supported liquid membrane in carbon dioxide separation [Volume 8, Issue 2, 2024, Pages 13-23]
Demercaptanization Simulation and Optimization of Demercaptanization of Propane and Butane in South Pars Gas Refineries [Volume 3, Issue 2, 2019, Pages 3-14]
Demulsifier Experimental study of Crude Oil demulsification by Demulsifier and process modeling by modification of Collision Frequency Function in Population Balance Equation [Volume 1, Issue 2, 2017, Pages 67-80]
Dendrimer Silica nanoparticles extracted from rice husk and functionalized with dendrimer as an effective recyclable adsorbent to remove divalent cadmium from aqueous solutions [Volume 6, Issue 1, 2022, Pages 63-76]
Design of experiment Applying a system-oriented method for culture medium design to improve bio-ethanol production by synechocystis [Volume 3, Issue 2, 2019, Pages 55-67]
Design of Experiments Statistical Modeling and Optimization of the Effective Parameters in Precipitation of Asphaltene from Vacuum Residue by Industrial Solvents [Volume 4, Issue 4, 2020, Pages 3-21]
Design on experiment Simulation of glycerol and biodiesel production process with numerical analysis and optimization of transesterification reactor by response surface method (RSM) [Volume 5, Issue 4, 2021, Pages 105-117]
Diamond Nanoparticle Experimental Study of Polyvinyl Acetate / Diamond Nanocomposites [Volume 4, Issue 1, 2020, Pages 118-109]
Discrete Element Method Modeling of asphaltene particle size distribution in well using DEM-CFD [Volume 4, Issue 2, 2020, Pages 69-82]
Dispersity Preparation of Poly(dimethylsiloxane) Microparticles via a Co-flow Microfluidic Device and Investigation of Various Parameters Effect on Morphology [Volume 4, Issue 3, 2020, Pages 26-15]
Divalent cadmium Silica nanoparticles extracted from rice husk and functionalized with dendrimer as an effective recyclable adsorbent to remove divalent cadmium from aqueous solutions [Volume 6, Issue 1, 2022, Pages 63-76]
Divalent ions Impact of Aqueous Phase Ion Type and Concentration on Calcite Surface Wettability and Acidic Oil-Brine IFT [Volume 4, Issue 2, 2020, Pages 19-34]
DMTA Investigation the photo-degradation of low-density polyethylene containing pro-oxidant and photo-catalyst [Volume 6, Issue 3, 2022, Pages 3-18]
Dopamine Investigation of the Structural Properties of Dopamine-Loaded Poly(butyl cyanoacrylate) Nanosystem [Volume 3, Issue 4, 2019, Pages 73-83]
Doping of bismuth Photocatalytic Reduction of Carbon dioxide to Renewable Methane using Titanium dioxide modified with Bismuth and Copper [Volume 4, Issue 3, 2020, Pages 55-43]
Drop deformation Experimental study of the mass transfer effect on the hydrodynamics of single drops in the chemical system of normal butanol/succinic acid/water [Volume 8, Issue 2, 2024, Pages 34-42]
Drug release Designing a Teriflunomide slow-release system based on a biodegradable composite scaffold poly (glycerin sebacic acid)-co-poly(Îµ-caprolactone-diol) [Volume 8, Issue 1, 2024, Pages 58-69]
DSC Investigating the Effect of DBTDL Catalyst on Curing Kinetic of Polyurethane using Differential Scanning Calorimetry: HTPB/TDI vs. HTPB/IPDI [Volume 5, Issue 1, 2021, Pages 43-55]

E

Effective adsorption Silica nanoparticles extracted from rice husk and functionalized with dendrimer as an effective recyclable adsorbent to remove divalent cadmium from aqueous solutions [Volume 6, Issue 1, 2022, Pages 63-76]
Effective removal EDTA-functionalized Fe3O4@SiO2 magnetic nanoadsorbent for divalent cadmium removal from aqueous solutions [Volume 5, Issue 3, 2021, Pages 95-106]
Elastic modulus Investigation of the performance of silica nanoparticles in increasing the strength of a polymer gel prepared by polyacrylamide in oil well condition [Volume 1, Issue 2, 2017, Pages 39-49]
Electrical Resistance Effect of swelling on the electrical behavior of nitrile/graphite rubber composite and break down of graphite network [Volume 4, Issue 3, 2020, Pages 13-3]
Electrical Resistance Investigating mechanical, electrical and morphological properties of polycarbonate/polyacrylonitrile-butadiene-styrene/nanographene nanocomposites [Volume 7, Issue 1, 2023, Pages 61-72]
Electric arc furnace dust Utilizing Yarrowia lipolytica supernatant for electric arc furnace dust bioleaching [Volume 7, Issue 2, 2023, Pages 3-16]
Electronic waste Cu biorecovery from electronic wastes without daily pH adjusting using Acidithiobacillus ferrooxidans [Volume 2, Issue 1, 2018, Pages 57-65]
Electrophotographic Toner Toner production by in situ emulsion polymerization: Investigation of the effect of reaction temperature and stirrer speed [Volume 6, Issue 1, 2022, Pages 3-14]
Electrospinning Optimization of PVA/Nano-Bentonite Nanofiber Composite Production for Improving Mechanical and Thermal Properties [Volume 2, Issue 2, 2018, Pages 17-28]
Electrospinning Design, fabrication and characterization of electrospun wound dressing composed of polyvinyl alcohol/Aloe Vera [Volume 4, Issue 2, 2020, Pages 83-93]
Electrospinning Measuring the porosity of PA6 nanofibers prepared via hybrid electrospinning after the dissolution of PVA component and effect of some parameters on it [Volume 4, Issue 2, 2020, Pages 95-106]
Electrospinning Synthesis and characterizations of polyvinyl alcohol-graphite electrospun nanofibers [Volume 4, Issue 4, 2020, Pages 77-88]
Empirical model Determination of the solubility of anticancer drugs in supercritical carbon dioxide using empirical models and artificial neural network [Volume 5, Issue 4, 2021, Pages 15-37]
Enhanced oil recovery Feasibility Study and Microscopic Investigation of the Mechanism of Enhanced Oil Recovery Process Using Injection of Clay Nanoparticles into the Glass Micromodel [Volume 2, Issue 2, 2018, Pages 41-56]
Enhanced oil recovery A Comparison Between Performance of Produced Biosurfactant and Conventional Chemical Surfactants in Enhanced Heavy Oil Recovery [Volume 3, Issue 1, 2019, Pages 69-80]
Enhanced oil recovery Concentration-Behavioral, Adsorption, Flooding, Relative Permeability Studies of Polymer Nanocomposite in Two Reservoir Lithologies [Volume 5, Issue 1, 2021, Pages 69-86]
Enhanced oil recovery Simulation of Hydrogel Injection in Micro-Model and Prediction of Oil Recovery Factor [Volume 5, Issue 4, 2021, Pages 3-13]
Enhanced oil recovery Ultrasonic Assisted Enhanced Oil Recovery Process: Numerical Analysis [Volume 6, Issue 4, 2022, Pages 69-82]
Enhance Oil Recovery Effect of In-Situ Synthesized Cerium Oxide Nanoparticles on Oil Recovery Factor In a Glass Micromodel [Volume 6, Issue 2, 2022, Pages 3-14]
EPDM rubber Optimization of tear resistance and compression set at rubber spring based on EPDM/NR alloy [Volume 4, Issue 1, 2020, Pages 107-91]
EPDM rubber Lifetime Prediction of EPDM Rubber Seals Using Time-Temperature Superposition Principle and the Effect of Nanoparticles Loading on It [Volume 7, Issue 3, 2023, Pages 29-48]
Epoxy Epoxy Modification by Polyurethane and Its Effects on Abrasion and Adhesion Properties [Volume 5, Issue 3, 2021, Pages 83-94]
Epoxy Adhesive An Investigation on the Effect of Nylon 6,6 and Phenolic Resin on Mechanical and Thermal Properties of Epoxy Based Adhesives [Volume 3, Issue 3, 2019, Pages 81-92]
Epoxy nanocomposite Assessingthe crosslinking behavior of nanocomposites based on epoxy and starch-modified graphene oxide nanosheets potent to be applied as engineering coatings [Volume 1, Issue 1, 2017, Pages 61-70]
Ethanol The Effect of Magnesium Particles Size and Reaction Conditions on Morphology of the Synthesized Magnesium Ethoxide [Volume 4, Issue 3, 2020, Pages 111-97]
Ethylene diamine tetraacetic acid EDTA-functionalized Fe3O4@SiO2 magnetic nanoadsorbent for divalent cadmium removal from aqueous solutions [Volume 5, Issue 3, 2021, Pages 95-106]
Ethylene selectivity Study of the effect of operating parameters on the performance of acetylene hydrogenation reactors [Volume 5, Issue 2, 2021, Pages 91-104]
Expandable Poly Styrene Investigation of influence of the Styrene Butadiene Styrene on the properties of the Expandable Poly Styrene and simulation of its laboratory data via Artificial Neural Networks [Volume 5, Issue 2, 2021, Pages 105-116]
Expereimental Design Cr (VI) Adsorption Using synthesis Novel UIO-66-MnFe2O4-TiO2 Magnetic Nanoparticles by Experimental Design [Volume 4, Issue 4, 2020, Pages 33-48]
Extentional viscosity Comparison of rheological behavior of LDPE in linear and nonlinear viscoelastic flow and using Multimode Pom-Pom model for prediction of uniaxial elongational flow [Volume 4, Issue 4, 2020, Pages 49-56]
Extruder Optimization of mechanical properties of PP-polymer foam fabricated via extruder [Volume 5, Issue 1, 2021, Pages 105-120]

F

Fe3O4 Nanoparticles Experimental investigation of Fe3O4 and Activated Carbon effect on the and heavy oil upgrading process by Electromagnetic heating [Volume 7, Issue 1, 2023, Pages 3-15]
Fe3O4 particles Use of functionalized superparamagnetic nanoparticles with Thiourea as heterogeneous catalysts in Petasis-Borono Mannich reaction [Volume 6, Issue 1, 2022, Pages 77-89]
Fe3O4@SiO2 Removal of nickel ions from aqueous solutions using theophylline-functionalized Fe3O4@SiO2 magnetic nanoparticles [Volume 8, Issue 3, 2024, Pages 40-49]
Fe3O4@SiO2 nanocomposite EDTA-functionalized Fe3O4@SiO2 magnetic nanoadsorbent for divalent cadmium removal from aqueous solutions [Volume 5, Issue 3, 2021, Pages 95-106]
Fe3O4@SiO2 nanocomposite Fe3O4@SiO2 magnetic core-shell nanoparticles functionalized with 1,4-dihydroxyanthraquinone as an effective and recyclable adsorbent for the removal of divalent cadmium from aqueous solutions [Volume 7, Issue 3, 2023, Pages 3-17]
Fe3O4@SiO2 nanoparticles Removal of Lead Metal Ion from Aqueous Solution with Fe3O4@SiO2 Core-Shell Magnetic Nanoadsorbent Functionalized with Polyvinyl Alcohol [Volume 8, Issue 1, 2024, Pages 12-25]
Feedback linearization Substrate concentration control in a bio-reactor for bio-hydrogen production via feedback linearization [Volume 5, Issue 4, 2021, Pages 91-103]
Ferrocene Poly (Vinyl Ferrocene)/Hydroxyl terminated polybutadiene (PVF/HTPB) blend as a Catalyst: Preparation, Characterization and Comparison [Volume 5, Issue 4, 2021, Pages 79-90]
Ferrocene based catalyst Poly (Vinyl Ferrocene)/Hydroxyl terminated polybutadiene (PVF/HTPB) blend as a Catalyst: Preparation, Characterization and Comparison [Volume 5, Issue 4, 2021, Pages 79-90]
Fibrous suspension and network Cationic PolyAcrylamide/Cellulose Nanofibril Polyelectrolytes Effect on Suspension and Network Properties of Packaging Recycled fibers [Volume 5, Issue 1, 2021, Pages 3-15]
Filler network structure Influence of swelling phenomenon on filler structure in nitrile-silica nanocomposite as resistant rubber compound to solvent [Volume 1, Issue 2, 2017, Pages 51-66]
Filler network structure Effect of swelling on the electrical behavior of nitrile/graphite rubber composite and break down of graphite network [Volume 4, Issue 3, 2020, Pages 13-3]
Fixed bed column Fixedâbed column studies of U(VI) biosorption using Pseudomonas putida â Chitosan hybrid biosorbent [Volume 3, Issue 2, 2019, Pages 68-81]
Flare Gas Process Design and Economic Analysis of Power Generation from Flare Gases of South Pars Gas Refinery (phase 22-24) [Volume 7, Issue 4, 2023, Pages 95-107]
Flexible sensor Effect of swelling on the electrical behavior of nitrile/graphite rubber composite and break down of graphite network [Volume 4, Issue 3, 2020, Pages 13-3]
Flooding Concentration-Behavioral, Adsorption, Flooding, Relative Permeability Studies of Polymer Nanocomposite in Two Reservoir Lithologies [Volume 5, Issue 1, 2021, Pages 69-86]
Flooding phenomena Control of flooding phenomena in vacuum distillation tray column using operational and laboratory parameters [Volume 5, Issue 2, 2021, Pages 51-63]
Fouling Improved antifouling properties of Polyether sulfone membrane by Pluronic F-127 additive for hemodialysis application [Volume 1, Issue 1, 2017, Pages 17-30]
Fragmentation Modeling of asphaltene particle size distribution in well using DEM-CFD [Volume 4, Issue 2, 2020, Pages 69-82]
Friction mechanism The Effect of JP4 on Friction between NBR and Aluminum in Different Roughness [Volume 2, Issue 1, 2018, Pages 19-29]
Friction theory Modeling Viscosity of Ionic Liquids and Akanolamines Mixtures Using Peng-Robinson and Soave-Redlich-Kwong Equation of States with Friction Theory [Volume 5, Issue 4, 2021, Pages 39-54]
FT-IR Chemorheological Investigation on The Effect of Three Polymerization Retardants on Hydroxyl Terminated Poly butadiene-based Polyurethane-Forming Rate [Volume 7, Issue 1, 2023, Pages 17-31]
Fuzzy controller Fuzzy Control of Semibatch Poly(ethylene terephthalate) Reactor Temperature based on Linguistic Rules [Volume 4, Issue 3, 2020, Pages 68-57]
Fuzzy Logic Prediction of conversion and products yields in steam reforming of methanol over Cu-Zn/ZrO2 catalyst using Artificial Intelligence methods [Volume 6, Issue 3, 2022, Pages 41-59]

G

Ganoderma lucidum A Study of growth and chitin-Glucan complex production kinetics in submerged culture of medicinal fungus Ganoderma lucidum [Volume 2, Issue 1, 2018, Pages 31-43]
Gas absorption Performance assessment of the hybrid nanofluid mixture of iron oxide nanoparticles and graphene nanosheets in the elimination of CO2 from the air, using a venturi scrubber [Volume 6, Issue 2, 2022, Pages 69-79]
Gas Detector Based Detector a of Development and Design for Composite CNT)/Acid Lactic(Poly on Compounds Organic Volatile of Detecti [Volume 3, Issue 4, 2019, Pages 43-56]
Gas Hydrate Modeling of Carbon Dioxide Replacement in Methane Hydrate Structure [Volume 4, Issue 1, 2020, Pages 42-31]
GC analyzer Development of an adaptive soft sensor for real-time monitoring of gas composition: Implementation on the azeotropic distillation column of the vinyl acetate monomer production process [Volume 8, Issue 3, 2024, Pages 17-28]
Gelatin Optimization of Gelatin/PEG Scaffold with Zn/Mg Doped Bioactive Ceramic Glass Using Response Surface Method (RSM) [Volume 8, Issue 1, 2024, Pages 36-50]
Gelation time The effect of reaction parameters in phenol formaldehyde resin synthesis and the evaluation of product properties [Volume 6, Issue 4, 2022, Pages 23-32]
Gelycerol Moonoleate Design of Magnetic Chitosan nanoparticles for Targeted Cancer Therapy using 5-Fluorouracil in Glycerol-Moonoleate [Volume 2, Issue 1, 2018, Pages 45-56]
Global linearized control Substrate concentration control in a bio-reactor for bio-hydrogen production via feedback linearization [Volume 5, Issue 4, 2021, Pages 91-103]
Glucosamine Application of Fe3O4@SiO2 nanoparticles functionalized with glucosamine molecules as an adsorbent in removing cadmium ion [Volume 8, Issue 3, 2024, Pages 29-39]
Glycerin Simulation of glycerol and biodiesel production process with numerical analysis and optimization of transesterification reactor by response surface method (RSM) [Volume 5, Issue 4, 2021, Pages 105-117]
Glycidyl triazolium methyl nitrate Investigation of detonation of glycidyl tri azolium Methyl nitrate as a new energetic polymer in propellant rockets with molecular dynamic simulation [Volume 1, Issue 2, 2017, Pages 3-14]
Goethite Investigation of effective parameters on synthesis of Goethite with solution oxidation method in the laboratory scale [Volume 6, Issue 4, 2022]
Gold Absorber Water desalination using solar steam generation systems based on graphite photothermal material [Volume 6, Issue 1, 2022, Pages 49-61]
Gracilaria algae Removal of heavy metal zinc from aqueous solution by the alga Gracilaria corticata [Volume 4, Issue 1, 2020, Pages 51-43]
Gradient Structure Performance Improvementand Investigation of Heat Transfer in Structurally Graded Silica Aerogels with Pores Diameter Changing [Volume 2, Issue 3, 2018, Pages 41-50]
Graphene Experimental investigating the effect of adding of graphene on the improvement of convective heat transfer coefficient of water/ethylene glycol system in laminar flow [Volume 2, Issue 3, 2018, Pages 3-19]
Graphene Molecular Simulation of Poly (2-oxazoline) Adsorption on Graphene Nanosheet [Volume 6, Issue 3, 2022, Pages 29-39]
Graphene Aerogel Effect of Graphite Source on Pore Structure and CO2 Adsorption of Graphene Aerogel [Volume 7, Issue 3, 2023, Pages 19-28]
Graphene NanoSheets Performance assessment of the hybrid nanofluid mixture of iron oxide nanoparticles and graphene nanosheets in the elimination of CO2 from the air, using a venturi scrubber [Volume 6, Issue 2, 2022, Pages 69-79]
Graphene oxide Investigation of optical properties of Graphene Oxideâ Poly Methyl Methacrylate Nanocomposites [Volume 4, Issue 4, 2020, Pages 57-66]
Graphene oxide Effect of Graphite Source on Pore Structure and CO2 Adsorption of Graphene Aerogel [Volume 7, Issue 3, 2023, Pages 19-28]
Graphite Synthesis and characterizations of polyvinyl alcohol-graphite electrospun nanofibers [Volume 4, Issue 4, 2020, Pages 77-88]
Graphite Improving the performance of graphite-based solar water desalination system by using plasmonic nickel nanoparticles and engineering the structure [Volume 6, Issue 3, 2022, Pages 75-85]
Graphite Effect of Graphite Source on Pore Structure and CO2 Adsorption of Graphene Aerogel [Volume 7, Issue 3, 2023, Pages 19-28]

H

Heat Transfer Performance Improvementand Investigation of Heat Transfer in Structurally Graded Silica Aerogels with Pores Diameter Changing [Volume 2, Issue 3, 2018, Pages 41-50]
Heavy metal Ion Removal of copper and chromium ions from aqueous solutions with magnetic nanoparticles functionalized with N-phosphonomethyl amino diacetic acid [Volume 7, Issue 1, 2023, Pages 33-46]
Heavy metals Removal of Lead Metal Ion from Aqueous Solution with Fe3O4@SiO2 Core-Shell Magnetic Nanoadsorbent Functionalized with Polyvinyl Alcohol [Volume 8, Issue 1, 2024, Pages 12-25]
Hhydrogen Desulfurization Simulation and Techno-Economic analysis of Hydrotreating Process of Mazut [Volume 5, Issue 1, 2021, Pages 17-30]
Hierarchical Zeolite The role of hierarchical Y zeolites on the catalyst performance of diesel Hydrodesulfurization Process [Volume 5, Issue 3, 2021, Pages 37-27]
HTPB Investigating the Effect of DBTDL Catalyst on Curing Kinetic of Polyurethane using Differential Scanning Calorimetry: HTPB/TDI vs. HTPB/IPDI [Volume 5, Issue 1, 2021, Pages 43-55]
Hybrid Nanofluid Performance assessment of the hybrid nanofluid mixture of iron oxide nanoparticles and graphene nanosheets in the elimination of CO2 from the air, using a venturi scrubber [Volume 6, Issue 2, 2022, Pages 69-79]
Hydraulic o-rings Mechanical properties improvements of O-rings manufacturing for hydraulic systems on the basis of acrylonitrile butadiene rubber through using nanoclays [Volume 1, Issue 1, 2017, Pages 39-48]
Hydrodesulfurization The role of hierarchical Y zeolites on the catalyst performance of diesel Hydrodesulfurization Process [Volume 5, Issue 3, 2021, Pages 37-27]
Hydrogel Synthesis and evaluation of cytotoxicity of hybrid hydrogel based on chitosan and Ph.ZnO@HAP nanocomposite [Volume 2, Issue 4, 2018, Pages 19-31]
Hydrogel Optimization of the synthesis of poly (acrylic acid)/xanthan semi-IPNs using the response surface methodology [Volume 4, Issue 3, 2020, Pages 95-81]
Hydrogel Simulation of Hydrogel Injection in Micro-Model and Prediction of Oil Recovery Factor [Volume 5, Issue 4, 2021, Pages 3-13]
Hydrogel Rheological properties evaluation of hydrogels based on xanthan polymer in the presence of nanoparticles [Volume 7, Issue 3, 2023, Pages 67-76]
Hydrogenation Study of the effect of operating parameters on the performance of acetylene hydrogenation reactors [Volume 5, Issue 2, 2021, Pages 91-104]
Hydrogenation Direct Synthesis of Liquefied Petroleum Gas from Carbon Dioxide Using Modified SBA-15 Hybrid Catalyst [Volume 6, Issue 4, 2022, Pages 33-42]
Hydrogen peroxide Numerical-parametrical analysis on the hydrogen peroxide catalyst bed for space monopropellant thruster applications [Volume 1, Issue 2, 2017, Pages 15-24]
Hydrogen Purification Modeling of Kavian Petrochemical Hydrogen Purification Industrial Unit by Pressure Swing Adsorption Process [Volume 8, Issue 3, 2024, Pages 50-58]
Hydrogen sulfide Removal of Hydrogen Sulfide [Volume 3, Issue 1, 2019, Pages 29-46]
Hydrophilicity Improved antifouling properties of Polyether sulfone membrane by Pluronic F-127 additive for hemodialysis application [Volume 1, Issue 1, 2017, Pages 17-30]
Hydrophilicity Direct modification of polyethylene surfaces using non-equilibrium gliding arc plasma with air at atmospheric pressure [Volume 7, Issue 4, 2023, Pages 15-32]
Hydrophilic polymer Effect of hydrophobic modification of scleroglucan on its adsorption behavior onto carbonate rock surface of oil reservoir [Volume 2, Issue 3, 2018, Pages 51-64]
Hydrophobicity Synthesis and properties of super hydrophobic silica aerogel/basalt fibers blanket by ambient drying method [Volume 1, Issue 1, 2017, Pages 31-38]
Hydrophobic modification Effect of hydrophobic modification of scleroglucan on its adsorption behavior onto carbonate rock surface of oil reservoir [Volume 2, Issue 3, 2018, Pages 51-64]
Hydroxyapatite Synthesis and evaluation of cytotoxicity of hybrid hydrogel based on chitosan and Ph.ZnO@HAP nanocomposite [Volume 2, Issue 4, 2018, Pages 19-31]
Hydroxyapatite Bioactive rod-like nanoparticles as novel filler for improving the properties of supramolecular polyester: synthesis and application [Volume 5, Issue 3, 2021, Pages 57-69]

I

IFT The experimental study of the effect of polyacrylamide nanocomposite on reservoir rock and fluid properties in presence of formation water [Volume 3, Issue 2, 2019, Pages 29-41]
IFT Impact of Aqueous Phase Ion Type and Concentration on Calcite Surface Wettability and Acidic Oil-Brine IFT [Volume 4, Issue 2, 2020, Pages 19-34]
Induction-Crystallisation Determination of nucleation and induction time of crystallization of amoxicillin nanoparticles in the presence of surface active agents [Volume 4, Issue 1, 2020, Pages 12-3]
Induction Time Determination of nucleation and induction time of crystallization of amoxicillin nanoparticles in the presence of surface active agents [Volume 4, Issue 1, 2020, Pages 12-3]
Industrial solvents Statistical Modeling and Optimization of the Effective Parameters in Precipitation of Asphaltene from Vacuum Residue by Industrial Solvents [Volume 4, Issue 4, 2020, Pages 3-21]
In-situ emulsion polymerization Toner production by in situ emulsion polymerization: Investigation of the effect of reaction temperature and stirrer speed [Volume 6, Issue 1, 2022, Pages 3-14]
In-Situ Synthesis Effect of In-Situ Synthesized Cerium Oxide Nanoparticles on Oil Recovery Factor In a Glass Micromodel [Volume 6, Issue 2, 2022, Pages 3-14]
Instantaneous velocity Experimental study of the mass transfer effect on the hydrodynamics of single drops in the chemical system of normal butanol/succinic acid/water [Volume 8, Issue 2, 2024, Pages 34-42]
Interfacial Solar Evaporation Water desalination using solar steam generation systems based on graphite photothermal material [Volume 6, Issue 1, 2022, Pages 49-61]
Interfacial Surface Tension Feasibility Study and Microscopic Investigation of the Mechanism of Enhanced Oil Recovery Process Using Injection of Clay Nanoparticles into the Glass Micromodel [Volume 2, Issue 2, 2018, Pages 41-56]
Interfacial tension Experimental study of Crude Oil demulsification by Demulsifier and process modeling by modification of Collision Frequency Function in Population Balance Equation [Volume 1, Issue 2, 2017, Pages 67-80]
Interfacial tension Experimental Investigation of Acidic Medium Effect on Seawater and Low Salinity Water for Wettability Alteration and Interfacial Tension Reduction: The Presence of Divalent and Trivalent Cations [Volume 7, Issue 1, 2023, Pages 47-59]
Investment opportunities Assessment of Investment Opportunities in Iranian Petrochemical Industry through Integrated Technical, Economic and Financial Modeling of the Entire Network of Petrochemical Units [Volume 8, Issue 2, 2024, Pages 1-12]
Iodide Removal of Iodide from Wastewater Using Strongly Basic Anion Resin [Volume 7, Issue 2, 2023, Pages 31-46]
Iodine The Effect of Magnesium Particles Size and Reaction Conditions on Morphology of the Synthesized Magnesium Ethoxide [Volume 4, Issue 3, 2020, Pages 111-97]
Iodine Removal of Iodide from Wastewater Using Strongly Basic Anion Resin [Volume 7, Issue 2, 2023, Pages 31-46]
Ion exchange resins Removal of Iodide from Wastewater Using Strongly Basic Anion Resin [Volume 7, Issue 2, 2023, Pages 31-46]
Ionic liquid Modeling Viscosity of Ionic Liquids and Akanolamines Mixtures Using Peng-Robinson and Soave-Redlich-Kwong Equation of States with Friction Theory [Volume 5, Issue 4, 2021, Pages 39-54]
Ionic-organic layer Impact of Aqueous Phase Ion Type and Concentration on Calcite Surface Wettability and Acidic Oil-Brine IFT [Volume 4, Issue 2, 2020, Pages 19-34]
Ion Removal Removal of copper and chromium ions from aqueous solutions with magnetic nanoparticles functionalized with N-phosphonomethyl amino diacetic acid [Volume 7, Issue 1, 2023, Pages 33-46]
Iron Synthesis and evaluation of Mn-Fe-Ce mixed oxide catalysts in lean methane combustion reactionon reaction [Volume 8, Issue 2, 2024, Pages 64-72]
Iron oxide nanoparticles Performance assessment of the hybrid nanofluid mixture of iron oxide nanoparticles and graphene nanosheets in the elimination of CO2 from the air, using a venturi scrubber [Volume 6, Issue 2, 2022, Pages 69-79]

L

Laminar flow Experimental investigating the effect of adding of graphene on the improvement of convective heat transfer coefficient of water/ethylene glycol system in laminar flow [Volume 2, Issue 3, 2018, Pages 3-19]
Langmuir isotherm Experimental study of Crude Oil demulsification by Demulsifier and process modeling by modification of Collision Frequency Function in Population Balance Equation [Volume 1, Issue 2, 2017, Pages 67-80]
Laponite nanoparticle Study on Stability of Laponite Nanoparticles Suspensions in Electrolyte Media [Volume 1, Issue 2, 2017, Pages 25-37]
Lignin Investigation of Lignin-based activated carbon synthesis parameters on its structural properties [Volume 5, Issue 3, 2021, Pages 71-81]
Limestone rock wettability The experimental study of the effect of polyacrylamide nanocomposite on reservoir rock and fluid properties in presence of formation water [Volume 3, Issue 2, 2019, Pages 29-41]
Linear and nonlinear viscoelatic Comparison of rheological behavior of LDPE in linear and nonlinear viscoelastic flow and using Multimode Pom-Pom model for prediction of uniaxial elongational flow [Volume 4, Issue 4, 2020, Pages 49-56]
Linear Linear Polyethylene (LLDPE ) Modeling the Application of Steam Produced by a Boiler-based Waste Incinerator to Disable Catalyst in the Production of Linear Polyethylene (LLDPE) in Lorestan Petrochemical Complex [Volume 3, Issue 1, 2019, Pages 81-92]
Linguistic rules Fuzzy Control of Semibatch Poly(ethylene terephthalate) Reactor Temperature based on Linguistic Rules [Volume 4, Issue 3, 2020, Pages 68-57]
Long-short term memory network Real-time Drilling Event Detection Based on Mud-logging data Using Long Short Term Memory Neural Networks [Volume 8, Issue 1, 2024, Pages 26-35]
LPG Simulation and Optimization of Demercaptanization of Propane and Butane in South Pars Gas Refineries [Volume 3, Issue 2, 2019, Pages 3-14]
LPG Direct Synthesis of Liquefied Petroleum Gas from Carbon Dioxide Using Modified SBA-15 Hybrid Catalyst [Volume 6, Issue 4, 2022, Pages 33-42]

M

Magnesium The Effect of Magnesium Particles Size and Reaction Conditions on Morphology of the Synthesized Magnesium Ethoxide [Volume 4, Issue 3, 2020, Pages 111-97]
Magnesium ethoxide The Effect of Magnesium Particles Size and Reaction Conditions on Morphology of the Synthesized Magnesium Ethoxide [Volume 4, Issue 3, 2020, Pages 111-97]
Magnetic mixed matrix membranes Investigation the performance of Polysulfone/Neodymium Magnetic Mixed-Matrix Membranes for O2/N2 Separation [Volume 4, Issue 2, 2020, Pages 53-68]
Magnetic Nanoadsorbent Removal of copper and chromium ions from aqueous solutions with magnetic nanoparticles functionalized with N-phosphonomethyl amino diacetic acid [Volume 7, Issue 1, 2023, Pages 33-46]
Magnetic nanoparticles Design of Magnetic Chitosan nanoparticles for Targeted Cancer Therapy using 5-Fluorouracil in Glycerol-Moonoleate [Volume 2, Issue 1, 2018, Pages 45-56]
Magnetic separation module Investigation the performance of Polysulfone/Neodymium Magnetic Mixed-Matrix Membranes for O2/N2 Separation [Volume 4, Issue 2, 2020, Pages 53-68]
MA-g-polypropylene Optimization of mechanical properties of PP-polymer foam fabricated via extruder [Volume 5, Issue 1, 2021, Pages 105-120]
Malachite Fabrication of PVA/Gr/TiO2 adsorbent and study of its application in removal of malachite green [Volume 3, Issue 1, 2019, Pages 59-68]
Manganese Statistical modeling and optimization of low-temperature oxidation dehydrogenation of propane process using manganese catalyst based on CuBTC organic metal framework [Volume 6, Issue 1, 2022, Pages 15-32]
Manganese Utilizing Yarrowia lipolytica supernatant for electric arc furnace dust bioleaching [Volume 7, Issue 2, 2023, Pages 3-16]
Manganese Synthesis and evaluation of Mn-Fe-Ce mixed oxide catalysts in lean methane combustion reactionon reaction [Volume 8, Issue 2, 2024, Pages 64-72]
Maximum Temperature Investigation on Using Amine Split Flow to Reduce Maximum Temperature of the Fajr-Jam Refinery Absorption Tower for Control Corrosion Rate [Volume 4, Issue 2, 2020, Pages 107-117]
Mazut Simulation and Techno-Economic analysis of Hydrotreating Process of Mazut [Volume 5, Issue 1, 2021, Pages 17-30]
MCF-7 cell line The effect of 5-fluorouracil loaded albumin magnetic nanoparticles on viability and cell cycle of human breast cancer MCF-7 cell line [Volume 5, Issue 1, 2021, Pages 31-41]
Mechanical Optimization of mechanical properties of PP-polymer foam fabricated via extruder [Volume 5, Issue 1, 2021, Pages 105-120]
Mechanical-dynamic properties Effect of Drying Temperature and Mechanical Pressure on Surface Structure and Dynamical Properties of Polyaniline Nanostructured Film [Volume 2, Issue 2, 2018, Pages 3-16]
Mechanical properties Investigation of detonation of glycidyl tri azolium Methyl nitrate as a new energetic polymer in propellant rockets with molecular dynamic simulation [Volume 1, Issue 2, 2017, Pages 3-14]
Mechanical properties An Investigation on the Effect of Nylon 6,6 and Phenolic Resin on Mechanical and Thermal Properties of Epoxy Based Adhesives [Volume 3, Issue 3, 2019, Pages 81-92]
Mechanical properties Optimization of ternary blends based on poly (lactic acid) according to physical and biological properties [Volume 4, Issue 1, 2020, Pages 66-53]
Mechanical properties The Effects of Cooling Method on Final Mechanical and Thermal Properties of Polyethylene Tanks Manufactured by Rotational Molding [Volume 4, Issue 4, 2020, Pages 23-31]
Mechanical strength A review on Nanocomposite Hydrogels: Rheology, Morphology, and Applications [Volume 3, Issue 3, 2019, Pages 3-38]
Mechanical strength Investigation of influence of the Styrene Butadiene Styrene on the properties of the Expandable Poly Styrene and simulation of its laboratory data via Artificial Neural Networks [Volume 5, Issue 2, 2021, Pages 105-116]
Medicinal mushroom A Study of growth and chitin-Glucan complex production kinetics in submerged culture of medicinal fungus Ganoderma lucidum [Volume 2, Issue 1, 2018, Pages 31-43]
Membrane technology Investigation of different methods of increasing membrane performance for oxygen/nitrogen separation [Volume 6, Issue 2, 2022, Pages 27-54]
Metabolic activity Evaluating the Metabolic Activity of Aspergillus niger for Organic Acid Production Considering the Impact of Small Molecules in Culture Media [Volume 7, Issue 3, 2023, Pages 49-66]
Metal Study of the effect of resin additives and aerosil on the improvement of rubber to metal adhesion [Volume 2, Issue 1, 2018, Pages 67-77]
Metformin Design and optimization of metformin released from ZnO/Chitosan nanocomposite [Volume 4, Issue 3, 2020, Pages 42-27]
Methane Modeling of Carbon Dioxide Replacement in Methane Hydrate Structure [Volume 4, Issue 1, 2020, Pages 42-31]
Methane Combustion Synthesis and evaluation of Mn-Fe-Ce mixed oxide catalysts in lean methane combustion reactionon reaction [Volume 8, Issue 2, 2024, Pages 64-72]
Methanol conversion Prediction of conversion and products yields in steam reforming of methanol over Cu-Zn/ZrO2 catalyst using Artificial Intelligence methods [Volume 6, Issue 3, 2022, Pages 41-59]
Metribuzin Photocatalytic Removal of Metribuzin Using Titanium Dioxide/Silver Nanocomposite [Volume 6, Issue 2, 2022, Pages 81-95]
Microbial Fuel Cell Voltage control of Two-chamber microbial fuel using classical PI and MPC controller [Volume 3, Issue 2, 2019, Pages 43-53]
Microfluidic Preparation of Poly(dimethylsiloxane) Microparticles via a Co-flow Microfluidic Device and Investigation of Various Parameters Effect on Morphology [Volume 4, Issue 3, 2020, Pages 26-15]
Micromodel Effect of In-Situ Synthesized Cerium Oxide Nanoparticles on Oil Recovery Factor In a Glass Micromodel [Volume 6, Issue 2, 2022, Pages 3-14]
Micromodel Experimental study of temperature and permeability effect on polymer flooding [Volume 6, Issue 3, 2022, Pages 19-28]
Microorganisms A Review on Lithium Bioleaching from Solid Resources [Volume 8, Issue 3, 2024, Pages 1-16]
Microparticle Preparation of Poly(dimethylsiloxane) Microparticles via a Co-flow Microfluidic Device and Investigation of Various Parameters Effect on Morphology [Volume 4, Issue 3, 2020, Pages 26-15]
Microwave Experimental Study of the Effect of Microwave and Ultrasonic Waves on the Upgrading and Asphaltene Content of Heavy Crude Oil [Volume 7, Issue 4, 2023, Pages 3-14]
Mixed metal oxide Synthesis and Characterization of CexZr1-xO2 using Supercritical Water [Volume 3, Issue 4, 2019, Pages 3-12]
MnFe2O4@SiO2 Removal of copper and chromium ions from aqueous solutions with magnetic nanoparticles functionalized with N-phosphonomethyl amino diacetic acid [Volume 7, Issue 1, 2023, Pages 33-46]
Mobility control The experimental study of the effect of polyacrylamide nanocomposite on reservoir rock and fluid properties in presence of formation water [Volume 3, Issue 2, 2019, Pages 29-41]
Modeling Removal of Hydrogen Sulfide [Volume 3, Issue 1, 2019, Pages 29-46]
Modeling Modeling of Carbon Dioxide Replacement in Methane Hydrate Structure [Volume 4, Issue 1, 2020, Pages 42-31]
Modeling Modeling Viscosity of Ionic Liquids and Akanolamines Mixtures Using Peng-Robinson and Soave-Redlich-Kwong Equation of States with Friction Theory [Volume 5, Issue 4, 2021, Pages 39-54]
Modeling Prediction of conversion and products yields in steam reforming of methanol over Cu-Zn/ZrO2 catalyst using Artificial Intelligence methods [Volume 6, Issue 3, 2022, Pages 41-59]
Modeling Kinetic study of xylene isomerization reaction with Mo-Pt @ZSM5 catalyst [Volume 6, Issue 4, 2022, Pages 43-56]
Modeling Modeling of Kavian Petrochemical Hydrogen Purification Industrial Unit by Pressure Swing Adsorption Process [Volume 8, Issue 3, 2024, Pages 50-58]
Modification Removal of lead ions from aqueous solutions by adsorption operation: A review [Volume 3, Issue 1, 2019, Pages 3-28]
Modified Titanium Oxide Fabrication of nanocomposite membrane based on polysulfone and modified Titanium oxide nanoparticles and its performance in industrial wastewater treatment using osmotic membrane bioreactor process [Volume 6, Issue 3, 2022, Pages 61-73]
MOF Effect of MIL-53 metal organic frameworks on performance of Pebax/PEG mixed matrix membrane for CO2/CH4 separation [Volume 3, Issue 3, 2019, Pages 69-79]
MOF Cr (VI) Adsorption Using synthesis Novel UIO-66-MnFe2O4-TiO2 Magnetic Nanoparticles by Experimental Design [Volume 4, Issue 4, 2020, Pages 33-48]
Molar ratio of formaldehyde to phenol The effect of reaction parameters in phenol formaldehyde resin synthesis and the evaluation of product properties [Volume 6, Issue 4, 2022, Pages 23-32]
Molecular simulation Molecular simulation of phenol-containing poly(ether-block-amide) membrane for carbon dioxide separation from nitrogen [Volume 8, Issue 2, 2024, Pages 24-33]
Montmorillonite Optimization of PVA/Nano-Bentonite Nanofiber Composite Production for Improving Mechanical and Thermal Properties [Volume 2, Issue 2, 2018, Pages 17-28]
MPC Voltage control of Two-chamber microbial fuel using classical PI and MPC controller [Volume 3, Issue 2, 2019, Pages 43-53]
MTBE Encapsulation of MTBE octane booster by inverse mini-emulsion polymerization [Volume 2, Issue 2, 2018, Pages 29-39]
Mud logging Real-time Drilling Event Detection Based on Mud-logging data Using Long Short Term Memory Neural Networks [Volume 8, Issue 1, 2024, Pages 26-35]
Multilayer super insulator Thermal properties improvement of multilayer super insulators based on novolac aerogel [Volume 2, Issue 1, 2018, Pages 3-18]
Multimode Pom-Pom model Comparison of rheological behavior of LDPE in linear and nonlinear viscoelastic flow and using Multimode Pom-Pom model for prediction of uniaxial elongational flow [Volume 4, Issue 4, 2020, Pages 49-56]

N

Nano adsorbent Fixedâbed column studies of nitrate ion adsorption using modified montmorillonite adsorbent [Volume 4, Issue 4, 2020, Pages 89-105]
Nanoclay Mechanical properties improvements of O-rings manufacturing for hydraulic systems on the basis of acrylonitrile butadiene rubber through using nanoclays [Volume 1, Issue 1, 2017, Pages 39-48]
Nanoclay Optimization of mechanical properties of PP-polymer foam fabricated via extruder [Volume 5, Issue 1, 2021, Pages 105-120]
Nanocomposite Concentration-Behavioral, Adsorption, Flooding, Relative Permeability Studies of Polymer Nanocomposite in Two Reservoir Lithologies [Volume 5, Issue 1, 2021, Pages 69-86]
Nanocomposite Bioactive rod-like nanoparticles as novel filler for improving the properties of supramolecular polyester: synthesis and application [Volume 5, Issue 3, 2021, Pages 57-69]
Nanocomposite Fabrication of nanocomposite membrane based on polysulfone and modified Titanium oxide nanoparticles and its performance in industrial wastewater treatment using osmotic membrane bioreactor process [Volume 6, Issue 3, 2022, Pages 61-73]
Nanocomposite Investigating mechanical, electrical and morphological properties of polycarbonate/polyacrylonitrile-butadiene-styrene/nanographene nanocomposites [Volume 7, Issue 1, 2023, Pages 61-72]
Nanocomposite hydrogel A review on Nanocomposite Hydrogels: Rheology, Morphology, and Applications [Volume 3, Issue 3, 2019, Pages 3-38]
Nanocomposites Mechanical properties improvements of O-rings manufacturing for hydraulic systems on the basis of acrylonitrile butadiene rubber through using nanoclays [Volume 1, Issue 1, 2017, Pages 39-48]
Nanocomposites Design and optimization of metformin released from ZnO/Chitosan nanocomposite [Volume 4, Issue 3, 2020, Pages 42-27]
Nanocomposites Optimization of mechanical properties of PP-polymer foam fabricated via extruder [Volume 5, Issue 1, 2021, Pages 105-120]
Nanocomposite scaffolds Fabrication of nanocomposite scaffold based on bacterial cellulose/zinc oxide nanoparticles/polypyrrole with antibacterial and cytotoxicity assessment [Volume 5, Issue 2, 2021, Pages 37-50]
Nanocomposite stability A comprehensive review on the application of nanoparticles in the matrix of phase change materials to improve thermal properties for energy management and storage [Volume 7, Issue 4, 2023, Pages 63-93]
Nanofiber Optimization of PVA/Nano-Bentonite Nanofiber Composite Production for Improving Mechanical and Thermal Properties [Volume 2, Issue 2, 2018, Pages 17-28]
Nanofiber Measuring the porosity of PA6 nanofibers prepared via hybrid electrospinning after the dissolution of PVA component and effect of some parameters on it [Volume 4, Issue 2, 2020, Pages 95-106]
Nanofiber Synthesis and characterizations of polyvinyl alcohol-graphite electrospun nanofibers [Volume 4, Issue 4, 2020, Pages 77-88]
Nanofluid Experimental investigating the effect of adding of graphene on the improvement of convective heat transfer coefficient of water/ethylene glycol system in laminar flow [Volume 2, Issue 3, 2018, Pages 3-19]
Nanofluid Effect of In-Situ Synthesized Cerium Oxide Nanoparticles on Oil Recovery Factor In a Glass Micromodel [Volume 6, Issue 2, 2022, Pages 3-14]
Nanohydrogel Water Uptake Improvement in Hygiene Papers by NanoHydrogel Prepared from Chitosan/Nano silver/ PolyAcrylic Acid Composite [Volume 3, Issue 3, 2019, Pages 51-60]
Nanoparticle Synthesis and Characterization of CexZr1-xO2 using Supercritical Water [Volume 3, Issue 4, 2019, Pages 3-12]
Nanoparticle Removal of copper and chromium ions from aqueous solutions with magnetic nanoparticles functionalized with N-phosphonomethyl amino diacetic acid [Volume 7, Issue 1, 2023, Pages 33-46]
Nanoparticles Investigation of the performance of silica nanoparticles in increasing the strength of a polymer gel prepared by polyacrylamide in oil well condition [Volume 1, Issue 2, 2017, Pages 39-49]
Nanoparticles Fabrication of PVA/Gr/TiO2 adsorbent and study of its application in removal of malachite green [Volume 3, Issue 1, 2019, Pages 59-68]
Nanoparticles A review on Nanocomposite Hydrogels: Rheology, Morphology, and Applications [Volume 3, Issue 3, 2019, Pages 3-38]
Nanoparticles Rheological properties evaluation of hydrogels based on xanthan polymer in the presence of nanoparticles [Volume 7, Issue 3, 2023, Pages 67-76]
Nanoparticles A comprehensive review on the application of nanoparticles in the matrix of phase change materials to improve thermal properties for energy management and storage [Volume 7, Issue 4, 2023, Pages 63-93]
Nano-silica Silica nanoparticles extracted from rice husk and functionalized with dendrimer as an effective recyclable adsorbent to remove divalent cadmium from aqueous solutions [Volume 6, Issue 1, 2022, Pages 63-76]
Nano Silica Optimization of anti- Corrosion of Epoxy/Zinc Phosphate and Nano Silica coating [Volume 4, Issue 2, 2020, Pages 35-51]
Nanosilver Water Uptake Improvement in Hygiene Papers by NanoHydrogel Prepared from Chitosan/Nano silver/ PolyAcrylic Acid Composite [Volume 3, Issue 3, 2019, Pages 51-60]
Nanosilver Preparation and study of physical and mechanical behavior of polylactic acid bionanocomposites reinforced with Cellulose Nanocrystal and silver nanoparticles [Volume 5, Issue 3, 2021, Pages 25-13]
Nanostructured film Effect of Drying Temperature and Mechanical Pressure on Surface Structure and Dynamical Properties of Polyaniline Nanostructured Film [Volume 2, Issue 2, 2018, Pages 3-16]
Nano-structure spacer Thermal properties improvement of multilayer super insulators based on novolac aerogel [Volume 2, Issue 1, 2018, Pages 3-18]
Naphtha Simulation and Techno-Economic analysis of Hydrotreating Process of Mazut [Volume 5, Issue 1, 2021, Pages 17-30]
Natural zeolite Investigating of Treated Natural Zeolite as a Catalyst Support for Propane Oxidative Dehydrogenation Process [Volume 6, Issue 2, 2022, Pages 15-26]
NBR Influence of swelling phenomenon on filler structure in nitrile-silica nanocomposite as resistant rubber compound to solvent [Volume 1, Issue 2, 2017, Pages 51-66]
NBR The Effect of JP4 on Friction between NBR and Aluminum in Different Roughness [Volume 2, Issue 1, 2018, Pages 19-29]
Neodymium Investigation the performance of Polysulfone/Neodymium Magnetic Mixed-Matrix Membranes for O2/N2 Separation [Volume 4, Issue 2, 2020, Pages 53-68]
Net Production Cost Simulation and Techno-Economic analysis of Hydrotreating Process of Mazut [Volume 5, Issue 1, 2021, Pages 17-30]
Neural Network Development of an adaptive soft sensor for real-time monitoring of gas composition: Implementation on the azeotropic distillation column of the vinyl acetate monomer production process [Volume 8, Issue 3, 2024, Pages 17-28]
Nickel Removal of nickel ions from aqueous solutions using theophylline-functionalized Fe3O4@SiO2 magnetic nanoparticles [Volume 8, Issue 3, 2024, Pages 40-49]
Nickel zinc iron oxide Preparation of mixed matrix membranes containing nickel iron oxide nanoparticles for separation of carbon dioxide, nitrogen and methane [Volume 4, Issue 1, 2020, Pages 90-67]
Nitrate Fixedâbed column studies of nitrate ion adsorption using modified montmorillonite adsorbent [Volume 4, Issue 4, 2020, Pages 89-105]
Nitric acid Leaching and recovery of selenium from Sar-cheshmeh copper anode slimes [Volume 5, Issue 1, 2021, Pages 57-67]
Nitrile rubber/graphite composite Effect of swelling on the electrical behavior of nitrile/graphite rubber composite and break down of graphite network [Volume 4, Issue 3, 2020, Pages 13-3]
Nitrogen Investigation of different methods of increasing membrane performance for oxygen/nitrogen separation [Volume 6, Issue 2, 2022, Pages 27-54]
Nitrogen Optimum allocation of carbon dioxide and nitrogen gas between wells of an oil field in the artificial gas lift process [Volume 7, Issue 2, 2023, Pages 59-71]
Non-edible sources Potential assessment of non-edible sources for biodiesel production in Iran [Volume 5, Issue 2, 2021, Pages 17-36]
Non-solvent Induced Phase Separation (NIPS) Based Detector a of Development and Design for Composite CNT)/Acid Lactic(Poly on Compounds Organic Volatile of Detecti [Volume 3, Issue 4, 2019, Pages 43-56]
Novolac resin Effect of Coal Tar Pitch on Improvement of Thermal Insulation Performance of Carbon Aerogels Based on Novolac Resin [Volume 2, Issue 4, 2018, Pages 53-64]
NR rubber Effect of carbon black on morphological and mechanical properties of rubber foams produced by a single-step method [Volume 1, Issue 1, 2017, Pages 49-60]
Nuclear Mechanism Determination of nucleation and induction time of crystallization of amoxicillin nanoparticles in the presence of surface active agents [Volume 4, Issue 1, 2020, Pages 12-3]
Nylon 6 An Investigation on the Effect of Nylon 6,6 and Phenolic Resin on Mechanical and Thermal Properties of Epoxy Based Adhesives [Volume 3, Issue 3, 2019, Pages 81-92]

O

Oil production Optimum allocation of carbon dioxide and nitrogen gas between wells of an oil field in the artificial gas lift process [Volume 7, Issue 2, 2023, Pages 59-71]
Oilseeds Potential assessment of non-edible sources for biodiesel production in Iran [Volume 5, Issue 2, 2021, Pages 17-36]
Olefin Investigating of Treated Natural Zeolite as a Catalyst Support for Propane Oxidative Dehydrogenation Process [Volume 6, Issue 2, 2022, Pages 15-26]
Olefin Evaluation of propane dehydrogenation catalysts: catalyst development, chemistry, and challenges [Volume 7, Issue 2, 2023, Pages 17-37]
Optical Nanosensors Synthesis of Zirconium-Based Coordination Polymer Luminescence Nanosensor for Detection of Trifluralin Herbicide [Volume 7, Issue 3, 2023, Pages 77-87]
Optimization Simulation and Optimization of Demercaptanization of Propane and Butane in South Pars Gas Refineries [Volume 3, Issue 2, 2019, Pages 3-14]
Optimization Optimization of ternary blends based on poly (lactic acid) according to physical and biological properties [Volume 4, Issue 1, 2020, Pages 66-53]
Optimization Optimization of tear resistance and compression set at rubber spring based on EPDM/NR alloy [Volume 4, Issue 1, 2020, Pages 107-91]
Optimization Optimization of the synthesis of poly (acrylic acid)/xanthan semi-IPNs using the response surface methodology [Volume 4, Issue 3, 2020, Pages 95-81]
Optimization Investigation of Optimum Condition of Saponin Extraction by Carbon Dioxide Super Critical Fluid and Solvent [Volume 4, Issue 4, 2020, Pages 67-76]
Optimization Applying Artificial Neural Network in Prediction behavior of alkylation of m-Cresol with isopropanol process and yield optimization by Bee Colony algorithm [Volume 5, Issue 4, 2021, Pages 69-78]
Optimization Simulation of glycerol and biodiesel production process with numerical analysis and optimization of transesterification reactor by response surface method (RSM) [Volume 5, Issue 4, 2021, Pages 105-117]
Optimization Optimum allocation of carbon dioxide and nitrogen gas between wells of an oil field in the artificial gas lift process [Volume 7, Issue 2, 2023, Pages 59-71]
Organic Acid Evaluating the Metabolic Activity of Aspergillus niger for Organic Acid Production Considering the Impact of Small Molecules in Culture Media [Volume 7, Issue 3, 2023, Pages 49-66]
Orientation Investigation on microstructure, morphology, and tensile properties of polypropylene/graphene nanoplatelets nanocomposite fiber in the presence of compatibilizer [Volume 4, Issue 1, 2020, Pages 30-13]
Osmosis Membrane Bioreactor Fabrication of nanocomposite membrane based on polysulfone and modified Titanium oxide nanoparticles and its performance in industrial wastewater treatment using osmotic membrane bioreactor process [Volume 6, Issue 3, 2022, Pages 61-73]
Oxidation-Reduction Potential (ORP) Investigation of effective parameters on synthesis of Goethite with solution oxidation method in the laboratory scale [Volume 6, Issue 4, 2022]
Oxygen Investigation of different methods of increasing membrane performance for oxygen/nitrogen separation [Volume 6, Issue 2, 2022, Pages 27-54]
Oxygen/nitrogen separation Investigation the performance of Polysulfone/Neodymium Magnetic Mixed-Matrix Membranes for O2/N2 Separation [Volume 4, Issue 2, 2020, Pages 53-68]

P

Parkinson’s disease Investigation of the Structural Properties of Dopamine-Loaded Poly(butyl cyanoacrylate) Nanosystem [Volume 3, Issue 4, 2019, Pages 73-83]
Partial oxidation reaction Modeling of a synthesis gas production reactor using Aspen plus [Volume 5, Issue 2, 2021, Pages 3-15]
Particle Swarm Optimization Removal of Hydrogen Sulfide [Volume 3, Issue 1, 2019, Pages 29-46]
Pebax®1657 Effect of MIL-53 metal organic frameworks on performance of Pebax/PEG mixed matrix membrane for CO2/CH4 separation [Volume 3, Issue 3, 2019, Pages 69-79]
Pebax®1657 Investigation of performance of Pebax/ Poly(vinyl alcohol) blend membrane for carbon dioxide separation from nitrogen [Volume 3, Issue 4, 2019, Pages 57-71]
PEG Effect of MIL-53 metal organic frameworks on performance of Pebax/PEG mixed matrix membrane for CO2/CH4 separation [Volume 3, Issue 3, 2019, Pages 69-79]
Persian gum Preparation and Improvement of Shear Strength of a Water-Redispersible Waterborne Acrylic Adhesive for Making Cellulose Joints [Volume 3, Issue 1, 2019, Pages 47-57]
Petasis-Borono Mannich reaction Use of functionalized superparamagnetic nanoparticles with Thiourea as heterogeneous catalysts in Petasis-Borono Mannich reaction [Volume 6, Issue 1, 2022, Pages 77-89]
Petrochemical industry Assessment of Investment Opportunities in Iranian Petrochemical Industry through Integrated Technical, Economic and Financial Modeling of the Entire Network of Petrochemical Units [Volume 8, Issue 2, 2024, Pages 1-12]
Petroleum Coke A 2-Dim CFD model development for petroleum coke calcination process in rotary kiln [Volume 6, Issue 4, 2022, Pages 57-68]
Petro-SIM software Simulation and Optimization of Demercaptanization of Propane and Butane in South Pars Gas Refineries [Volume 3, Issue 2, 2019, Pages 3-14]
Phase Change Materials A comprehensive review on the application of nanoparticles in the matrix of phase change materials to improve thermal properties for energy management and storage [Volume 7, Issue 4, 2023, Pages 63-93]
Phase-Field Method Simulation of Hydrogel Injection in Micro-Model and Prediction of Oil Recovery Factor [Volume 5, Issue 4, 2021, Pages 3-13]
Phenolic An Investigation on the Effect of Nylon 6,6 and Phenolic Resin on Mechanical and Thermal Properties of Epoxy Based Adhesives [Volume 3, Issue 3, 2019, Pages 81-92]
Phosphonomethyl Aminodiacetic acid Removal of copper and chromium ions from aqueous solutions with magnetic nanoparticles functionalized with N-phosphonomethyl amino diacetic acid [Volume 7, Issue 1, 2023, Pages 33-46]
Photocatalytic reduction of Carbon dioxide Photocatalytic Reduction of Carbon dioxide to Renewable Methane using Titanium dioxide modified with Bismuth and Copper [Volume 4, Issue 3, 2020, Pages 55-43]
Photothermal Materials Water desalination using solar steam generation systems based on graphite photothermal material [Volume 6, Issue 1, 2022, Pages 49-61]
Physical properties Chemorheological Investigation on The Effect of Three Polymerization Retardants on Hydroxyl Terminated Poly butadiene-based Polyurethane-Forming Rate [Volume 7, Issue 1, 2023, Pages 17-31]
Physical properties The effect of spinneret cross-sectional shape on the physical and crimp properties of melt spun PET multifilament yarn [Volume 8, Issue 3, 2024, Pages 59-67]
PI Voltage control of Two-chamber microbial fuel using classical PI and MPC controller [Volume 3, Issue 2, 2019, Pages 43-53]
Plasma gliding arc Direct modification of polyethylene surfaces using non-equilibrium gliding arc plasma with air at atmospheric pressure [Volume 7, Issue 4, 2023, Pages 15-32]
Plasmonic Improving the performance of graphite-based solar water desalination system by using plasmonic nickel nanoparticles and engineering the structure [Volume 6, Issue 3, 2022, Pages 75-85]
Plasticizer Investigation of the Effect of Poly(vinyl chloride)-g-Poly(butyl acrylate) Brush Copolymer as Plasticizer on the Performance of the Poly(vinyl chloride) Films [Volume 8, Issue 4, 2024, Pages 1-11]
Pluronic F-127 Improved antifouling properties of Polyether sulfone membrane by Pluronic F-127 additive for hemodialysis application [Volume 1, Issue 1, 2017, Pages 17-30]
Pollutant Application of Molecularly Imprinted Film for Extraction of Herbicide Mecoprop from Aqueous Sample [Volume 2, Issue 3, 2018, Pages 77-89]
Polyacrylamide Study on adsorption behavior of dilute polymeric systems based on sulfonated polyacrylamide for improving oil recovery application [Volume 1, Issue 1, 2017, Pages 5-16]
Poly (acrylic acid) (PAA) Optimization of the synthesis of poly (acrylic acid)/xanthan semi-IPNs using the response surface methodology [Volume 4, Issue 3, 2020, Pages 95-81]
Polyaniline Effect of Drying Temperature and Mechanical Pressure on Surface Structure and Dynamical Properties of Polyaniline Nanostructured Film [Volume 2, Issue 2, 2018, Pages 3-16]
Polyaniline Synthesis and investigation of low band gap energy donor-acceptor polyaniline [Volume 5, Issue 3, 2021, Pages 39-55]
Poly(butyl acrylate) Investigation of the Effect of Poly(vinyl chloride)-g-Poly(butyl acrylate) Brush Copolymer as Plasticizer on the Performance of the Poly(vinyl chloride) Films [Volume 8, Issue 4, 2024, Pages 1-11]
Poly (butylcyanoacrylate) Investigation of the Structural Properties of Dopamine-Loaded Poly(butyl cyanoacrylate) Nanosystem [Volume 3, Issue 4, 2019, Pages 73-83]
Polycaprolactone Bioactive rod-like nanoparticles as novel filler for improving the properties of supramolecular polyester: synthesis and application [Volume 5, Issue 3, 2021, Pages 57-69]
Polycaprolactone Crosslinking Poly(Îµ-caprolactone) with benzoyl peroxide by thermal method for making radiotherapy masks [Volume 6, Issue 2, 2022, Pages 55-68]
Polycaprolactone diol Designing a Teriflunomide slow-release system based on a biodegradable composite scaffold poly (glycerin sebacic acid)-co-poly(Îµ-caprolactone-diol) [Volume 8, Issue 1, 2024, Pages 58-69]
Poly(dimethylsiloxane) Preparation of Poly(dimethylsiloxane) Microparticles via a Co-flow Microfluidic Device and Investigation of Various Parameters Effect on Morphology [Volume 4, Issue 3, 2020, Pages 26-15]
Polyether block amide Fabrication of nanocomposite membrane based on polyether block amide/polyvinyl alcohol filled with magnesium oxide nanoparticles in order to investigate selective permeability properties [Volume 7, Issue 1, 2023, Pages 73-85]
Polyethersulfone Improved antifouling properties of Polyether sulfone membrane by Pluronic F-127 additive for hemodialysis application [Volume 1, Issue 1, 2017, Pages 17-30]
Polyethylene Direct modification of polyethylene surfaces using non-equilibrium gliding arc plasma with air at atmospheric pressure [Volume 7, Issue 4, 2023, Pages 15-32]
Polyethylene glycol Optimization of Gelatin/PEG Scaffold with Zn/Mg Doped Bioactive Ceramic Glass Using Response Surface Method (RSM) [Volume 8, Issue 1, 2024, Pages 36-50]
Polyethylene Tank The Effects of Cooling Method on Final Mechanical and Thermal Properties of Polyethylene Tanks Manufactured by Rotational Molding [Volume 4, Issue 4, 2020, Pages 23-31]
Poly(ethylene terephthalate) Fuzzy Control of Semibatch Poly(ethylene terephthalate) Reactor Temperature based on Linguistic Rules [Volume 4, Issue 3, 2020, Pages 68-57]
Polyglycerine sebacic acid Designing a Teriflunomide slow-release system based on a biodegradable composite scaffold poly (glycerin sebacic acid)-co-poly(Îµ-caprolactone-diol) [Volume 8, Issue 1, 2024, Pages 58-69]
Polylactic acid Preparation and study of physical and mechanical behavior of polylactic acid bionanocomposites reinforced with Cellulose Nanocrystal and silver nanoparticles [Volume 5, Issue 3, 2021, Pages 25-13]
Poly (Lactic Acid) (PLA) Based Detector a of Development and Design for Composite CNT)/Acid Lactic(Poly on Compounds Organic Volatile of Detecti [Volume 3, Issue 4, 2019, Pages 43-56]
Polymer Measurement of Surface and Shallow depth Changes of Polypropylene Due to Gliding Discharge Plasma [Volume 7, Issue 2, 2023, Pages 47-57]
Polymer Rheological properties evaluation of hydrogels based on xanthan polymer in the presence of nanoparticles [Volume 7, Issue 3, 2023, Pages 67-76]
Polymer blends Study of the rheological and compatibility behavior of sulfonated acrylamide copolymer/ wheat starch blends in aqueous media [Volume 3, Issue 2, 2019, Pages 15-27]
Polymer-filler interaction Influence of swelling phenomenon on filler structure in nitrile-silica nanocomposite as resistant rubber compound to solvent [Volume 1, Issue 2, 2017, Pages 51-66]
Polymer gel strength Investigation of the performance of silica nanoparticles in increasing the strength of a polymer gel prepared by polyacrylamide in oil well condition [Volume 1, Issue 2, 2017, Pages 39-49]
Polymeric aerogels Thermal properties improvement of multilayer super insulators based on novolac aerogel [Volume 2, Issue 1, 2018, Pages 3-18]
Polymeric membranes Investigation of different methods of increasing membrane performance for oxygen/nitrogen separation [Volume 6, Issue 2, 2022, Pages 27-54]
Polymerization retarder Chemorheological Investigation on The Effect of Three Polymerization Retardants on Hydroxyl Terminated Poly butadiene-based Polyurethane-Forming Rate [Volume 7, Issue 1, 2023, Pages 17-31]
Polymerization temperature Toner production by in situ emulsion polymerization: Investigation of the effect of reaction temperature and stirrer speed [Volume 6, Issue 1, 2022, Pages 3-14]
Polymer membrane Molecular simulation of phenol-containing poly(ether-block-amide) membrane for carbon dioxide separation from nitrogen [Volume 8, Issue 2, 2024, Pages 24-33]
Poly Methyl Methacrylate Investigation of optical properties of Graphene Oxideâ Poly Methyl Methacrylate Nanocomposites [Volume 4, Issue 4, 2020, Pages 57-66]
Polypropylene Measurement of Surface and Shallow depth Changes of Polypropylene Due to Gliding Discharge Plasma [Volume 7, Issue 2, 2023, Pages 47-57]
Polypropylene/graphene nanoplatelets nanocomposite fiber Investigation on microstructure, morphology, and tensile properties of polypropylene/graphene nanoplatelets nanocomposite fiber in the presence of compatibilizer [Volume 4, Issue 1, 2020, Pages 30-13]
Polypyrrole Fabrication of nanocomposite scaffold based on bacterial cellulose/zinc oxide nanoparticles/polypyrrole with antibacterial and cytotoxicity assessment [Volume 5, Issue 2, 2021, Pages 37-50]
Polysaccharide Rheology and Chemorheology Behavior of Alumina/Polysaccharide Suspensions in Ceramic Membranes Production [Volume 8, Issue 1, 2024, Pages 51-57]
Polysulfone Investigation the performance of Polysulfone/Neodymium Magnetic Mixed-Matrix Membranes for O2/N2 Separation [Volume 4, Issue 2, 2020, Pages 53-68]
Polysulfone Exploring the performance of a composite membrane with a nanometer-thin selective layer of chitosan-gallic acid for the separation of carbon dioxide [Volume 7, Issue 4, 2023, Pages 47-61]
Polyurethane Epoxy Modification by Polyurethane and Its Effects on Abrasion and Adhesion Properties [Volume 5, Issue 3, 2021, Pages 83-94]
Polyurethane/acrylic blend Evaluation of Tack and Shear Strength of Pressure-Sensitive Adhesives Comprised of Polyurethane and Acrylic Copolymer Blend [Volume 5, Issue 4, 2021, Pages 55-67]
Polyvinyl Acetate Experimental Study of Polyvinyl Acetate / Diamond Nanocomposites [Volume 4, Issue 1, 2020, Pages 118-109]
Polyvinyl alcohol Fabrication of PVA/Gr/TiO2 adsorbent and study of its application in removal of malachite green [Volume 3, Issue 1, 2019, Pages 59-68]
Polyvinyl alcohol Design, fabrication and characterization of electrospun wound dressing composed of polyvinyl alcohol/Aloe Vera [Volume 4, Issue 2, 2020, Pages 83-93]
Poly(vinyl chloride) Investigation of the Effect of Poly(vinyl chloride)-g-Poly(butyl acrylate) Brush Copolymer as Plasticizer on the Performance of the Poly(vinyl chloride) Films [Volume 8, Issue 4, 2024, Pages 1-11]
Population balance equation Experimental study of Crude Oil demulsification by Demulsifier and process modeling by modification of Collision Frequency Function in Population Balance Equation [Volume 1, Issue 2, 2017, Pages 67-80]
Porosity Measuring the porosity of PA6 nanofibers prepared via hybrid electrospinning after the dissolution of PVA component and effect of some parameters on it [Volume 4, Issue 2, 2020, Pages 95-106]
Porous Coordination Polymers Synthesis of Zirconium-Based Coordination Polymer Luminescence Nanosensor for Detection of Trifluralin Herbicide [Volume 7, Issue 3, 2023, Pages 77-87]
Porous Structure Effect of Graphite Source on Pore Structure and CO2 Adsorption of Graphene Aerogel [Volume 7, Issue 3, 2023, Pages 19-28]
Post-Synthesis The role of hierarchical Y zeolites on the catalyst performance of diesel Hydrodesulfurization Process [Volume 5, Issue 3, 2021, Pages 37-27]
Potential assessment Potential assessment of non-edible sources for biodiesel production in Iran [Volume 5, Issue 2, 2021, Pages 17-36]
Powder adhesive Preparation and Improvement of Shear Strength of a Water-Redispersible Waterborne Acrylic Adhesive for Making Cellulose Joints [Volume 3, Issue 1, 2019, Pages 47-57]
Precipitated silica Study of operating conditions of silica extraction from rice husk for Special use in rubber [Volume 5, Issue 2, 2021, Pages 65-77]
Pressure-sensitive adhesive Evaluation of Tack and Shear Strength of Pressure-Sensitive Adhesives Comprised of Polyurethane and Acrylic Copolymer Blend [Volume 5, Issue 4, 2021, Pages 55-67]
Pressure Swing adsorption Modeling of Kavian Petrochemical Hydrogen Purification Industrial Unit by Pressure Swing Adsorption Process [Volume 8, Issue 3, 2024, Pages 50-58]
Process control Substrate concentration control in a bio-reactor for bio-hydrogen production via feedback linearization [Volume 5, Issue 4, 2021, Pages 91-103]
Process-financial modeling Assessment of Investment Opportunities in Iranian Petrochemical Industry through Integrated Technical, Economic and Financial Modeling of the Entire Network of Petrochemical Units [Volume 8, Issue 2, 2024, Pages 1-12]
Production Temperature Changes in Oil Wells and Its Effect on Tubulars Stress Condition [Volume 5, Issue 3, 2021, Pages 12-3]
Pro-oxidant Investigation the photo-degradation of low-density polyethylene containing pro-oxidant and photo-catalyst [Volume 6, Issue 3, 2022, Pages 3-18]
Propane Dehydrogenation Evaluation of propane dehydrogenation catalysts: catalyst development, chemistry, and challenges [Volume 7, Issue 2, 2023, Pages 17-37]
Properties Optimization of mechanical properties of PP-polymer foam fabricated via extruder [Volume 5, Issue 1, 2021, Pages 105-120]
Properties of Pyrolysis Products Effect of Size of tire parts and Mazut Addition on Simultaneous Pyrolysis of Used Tire and Mazut [Volume 3, Issue 4, 2019, Pages 13-24]
Pseudomonas putida @ Chitosan Fixedâbed column studies of U(VI) biosorption using Pseudomonas putida â Chitosan hybrid biosorbent [Volume 3, Issue 2, 2019, Pages 68-81]
Pseudo steady state Assessment of Investment Opportunities in Iranian Petrochemical Industry through Integrated Technical, Economic and Financial Modeling of the Entire Network of Petrochemical Units [Volume 8, Issue 2, 2024, Pages 1-12]
Pt-based catalysts Evaluation of propane dehydrogenation catalysts: catalyst development, chemistry, and challenges [Volume 7, Issue 2, 2023, Pages 17-37]
PVA Optimization of PVA/Nano-Bentonite Nanofiber Composite Production for Improving Mechanical and Thermal Properties [Volume 2, Issue 2, 2018, Pages 17-28]
PVA Investigation of performance of Pebax/ Poly(vinyl alcohol) blend membrane for carbon dioxide separation from nitrogen [Volume 3, Issue 4, 2019, Pages 57-71]
Pyrolysis Effect of Coal Tar Pitch on Improvement of Thermal Insulation Performance of Carbon Aerogels Based on Novolac Resin [Volume 2, Issue 4, 2018, Pages 53-64]
Pyrolysis of Mazut Effect of Size of tire parts and Mazut Addition on Simultaneous Pyrolysis of Used Tire and Mazut [Volume 3, Issue 4, 2019, Pages 13-24]
Pyrolysis of Tire Effect of Size of tire parts and Mazut Addition on Simultaneous Pyrolysis of Used Tire and Mazut [Volume 3, Issue 4, 2019, Pages 13-24]

R

Radiotherapy mask Crosslinking Poly(Îµ-caprolactone) with benzoyl peroxide by thermal method for making radiotherapy masks [Volume 6, Issue 2, 2022, Pages 55-68]
Reaction conditions The effect of reaction parameters in phenol formaldehyde resin synthesis and the evaluation of product properties [Volume 6, Issue 4, 2022, Pages 23-32]
Reaction time Investigation of effective parameters on synthesis of Goethite with solution oxidation method in the laboratory scale [Volume 6, Issue 4, 2022]
Reactor Study of the effect of operating parameters on the performance of acetylene hydrogenation reactors [Volume 5, Issue 2, 2021, Pages 91-104]
Recovery Leaching and recovery of selenium from Sar-cheshmeh copper anode slimes [Volume 5, Issue 1, 2021, Pages 57-67]
Reflective Spectrometer Investigation of optical properties of Graphene Oxideâ Poly Methyl Methacrylate Nanocomposites [Volume 4, Issue 4, 2020, Pages 57-66]
Reflector layer Thermal properties improvement of multilayer super insulators based on novolac aerogel [Volume 2, Issue 1, 2018, Pages 3-18]
Regulatory culture medium Applying a system-oriented method for culture medium design to improve bio-ethanol production by synechocystis [Volume 3, Issue 2, 2019, Pages 55-67]
Regulatory defined medium Evaluating the Metabolic Activity of Aspergillus niger for Organic Acid Production Considering the Impact of Small Molecules in Culture Media [Volume 7, Issue 3, 2023, Pages 49-66]
Relative permeability Concentration-Behavioral, Adsorption, Flooding, Relative Permeability Studies of Polymer Nanocomposite in Two Reservoir Lithologies [Volume 5, Issue 1, 2021, Pages 69-86]
Renewable Energy Effect of Operating Parameters on the Injection of Carbon Dioxide and Sour Gas as Cushion Gas in the Process of Underground Hydrogen Gas Storage [Volume 8, Issue 1, 2024, Pages 3-11]
Renewable Energy Underground Hydrogen Storage in the Presence of Cushion Gas: Investigation of Cushion Gas Properties, Reservoir, and Operational Parameters [Volume 8, Issue 2, 2024, Pages 43-63]
Renewable fuels Potential assessment of non-edible sources for biodiesel production in Iran [Volume 5, Issue 2, 2021, Pages 17-36]
Renewable methane Photocatalytic Reduction of Carbon dioxide to Renewable Methane using Titanium dioxide modified with Bismuth and Copper [Volume 4, Issue 3, 2020, Pages 55-43]
Replacement Modeling of Carbon Dioxide Replacement in Methane Hydrate Structure [Volume 4, Issue 1, 2020, Pages 42-31]
Residence Time Direct Synthesis of Liquefied Petroleum Gas from Carbon Dioxide Using Modified SBA-15 Hybrid Catalyst [Volume 6, Issue 4, 2022, Pages 33-42]
Resin Study of the effect of resin additives and aerosil on the improvement of rubber to metal adhesion [Volume 2, Issue 1, 2018, Pages 67-77]
Response sureface Investigation of Optimum Condition of Saponin Extraction by Carbon Dioxide Super Critical Fluid and Solvent [Volume 4, Issue 4, 2020, Pages 67-76]
Response surface method Simulation of glycerol and biodiesel production process with numerical analysis and optimization of transesterification reactor by response surface method (RSM) [Volume 5, Issue 4, 2021, Pages 105-117]
Response surface method Optimization of Gelatin/PEG Scaffold with Zn/Mg Doped Bioactive Ceramic Glass Using Response Surface Method (RSM) [Volume 8, Issue 1, 2024, Pages 36-50]
Response Surface Methodology (RSM) Optimization of the synthesis of poly (acrylic acid)/xanthan semi-IPNs using the response surface methodology [Volume 4, Issue 3, 2020, Pages 95-81]
Rhamnolipid A Comparison Between Performance of Produced Biosurfactant and Conventional Chemical Surfactants in Enhanced Heavy Oil Recovery [Volume 3, Issue 1, 2019, Pages 69-80]
Rheology Investigation of the performance of silica nanoparticles in increasing the strength of a polymer gel prepared by polyacrylamide in oil well condition [Volume 1, Issue 2, 2017, Pages 39-49]
Rheology Study of the rheological and compatibility behavior of sulfonated acrylamide copolymer/ wheat starch blends in aqueous media [Volume 3, Issue 2, 2019, Pages 15-27]
Rheology A review on Nanocomposite Hydrogels: Rheology, Morphology, and Applications [Volume 3, Issue 3, 2019, Pages 3-38]
Rheology Comparison of rheological behavior of LDPE in linear and nonlinear viscoelastic flow and using Multimode Pom-Pom model for prediction of uniaxial elongational flow [Volume 4, Issue 4, 2020, Pages 49-56]
Rheology Rheological properties evaluation of hydrogels based on xanthan polymer in the presence of nanoparticles [Volume 7, Issue 3, 2023, Pages 67-76]
Rheology Rheology and Chemorheology Behavior of Alumina/Polysaccharide Suspensions in Ceramic Membranes Production [Volume 8, Issue 1, 2024, Pages 51-57]
Rice husk Preparation of silica powder from rice husk by thermal treatment and comparison of its performance with commercial silica in blend of passenger radial tire belt [Volume 4, Issue 3, 2020, Pages 80-69]
Rice husk Silica nanoparticles extracted from rice husk and functionalized with dendrimer as an effective recyclable adsorbent to remove divalent cadmium from aqueous solutions [Volume 6, Issue 1, 2022, Pages 63-76]
Rotary kiln. Modeling A 2-Dim CFD model development for petroleum coke calcination process in rotary kiln [Volume 6, Issue 4, 2022, Pages 57-68]
Rotational Molding The Effects of Cooling Method on Final Mechanical and Thermal Properties of Polyethylene Tanks Manufactured by Rotational Molding [Volume 4, Issue 4, 2020, Pages 23-31]
Rubber Study of the effect of resin additives and aerosil on the improvement of rubber to metal adhesion [Volume 2, Issue 1, 2018, Pages 67-77]
Rubber spring Optimization of tear resistance and compression set at rubber spring based on EPDM/NR alloy [Volume 4, Issue 1, 2020, Pages 107-91]
Rung-kutta gill Modeling of Kavian Petrochemical Hydrogen Purification Industrial Unit by Pressure Swing Adsorption Process [Volume 8, Issue 3, 2024, Pages 50-58]
R value Investigation the effect of NCO/OH ratio, amount and type of curing catayst on the Pot life of HTPB based binder system [Volume 2, Issue 3, 2018, Pages 65-76]

S

Saponin Investigation of Optimum Condition of Saponin Extraction by Carbon Dioxide Super Critical Fluid and Solvent [Volume 4, Issue 4, 2020, Pages 67-76]
Scaffold Designing a Teriflunomide slow-release system based on a biodegradable composite scaffold poly (glycerin sebacic acid)-co-poly(Îµ-caprolactone-diol) [Volume 8, Issue 1, 2024, Pages 58-69]
Scientometrics The degree of conformity of research subjects in the chemical engineering in Shahid Chamran University with Iran and the world [Volume 7, Issue 4, 2023, Pages 33-45]
Scleroglucan Effect of hydrophobic modification of scleroglucan on its adsorption behavior onto carbonate rock surface of oil reservoir [Volume 2, Issue 3, 2018, Pages 51-64]
Selectivity Investigation of performance of Pebax/ Poly(vinyl alcohol) blend membrane for carbon dioxide separation from nitrogen [Volume 3, Issue 4, 2019, Pages 57-71]
Selectivity Fabrication of nanocomposite membrane based on polyether block amide/polyvinyl alcohol filled with magnesium oxide nanoparticles in order to investigate selective permeability properties [Volume 7, Issue 1, 2023, Pages 73-85]
Selectivity Performance evaluation of Pebax/ deep eutectic solvent supported liquid membrane in carbon dioxide separation [Volume 8, Issue 2, 2024, Pages 13-23]
Selenium Leaching and recovery of selenium from Sar-cheshmeh copper anode slimes [Volume 5, Issue 1, 2021, Pages 57-67]
Semi-batch reactor Fuzzy Control of Semibatch Poly(ethylene terephthalate) Reactor Temperature based on Linguistic Rules [Volume 4, Issue 3, 2020, Pages 68-57]
Shahid Chamran University The degree of conformity of research subjects in the chemical engineering in Shahid Chamran University with Iran and the world [Volume 7, Issue 4, 2023, Pages 33-45]
Shear Strength Preparation and Improvement of Shear Strength of a Water-Redispersible Waterborne Acrylic Adhesive for Making Cellulose Joints [Volume 3, Issue 1, 2019, Pages 47-57]
Shear Strength Evaluation of Tack and Shear Strength of Pressure-Sensitive Adhesives Comprised of Polyurethane and Acrylic Copolymer Blend [Volume 5, Issue 4, 2021, Pages 55-67]
Silica aerogel Synthesis and properties of super hydrophobic silica aerogel/basalt fibers blanket by ambient drying method [Volume 1, Issue 1, 2017, Pages 31-38]
Silica aerogel Performance Improvementand Investigation of Heat Transfer in Structurally Graded Silica Aerogels with Pores Diameter Changing [Volume 2, Issue 3, 2018, Pages 41-50]
Silica/polyacrylamide nanocomposite The experimental study of the effect of polyacrylamide nanocomposite on reservoir rock and fluid properties in presence of formation water [Volume 3, Issue 2, 2019, Pages 29-41]
Silicon Oxidative Dehydrogenation of Propane with CO2 Oxidant over vanadium catalyst supported on Titania-Silicon Nanostructures [Volume 2, Issue 4, 2018, Pages 65-74]
Simulation and Modeling Ultrasonic Assisted Enhanced Oil Recovery Process: Numerical Analysis [Volume 6, Issue 4, 2022, Pages 69-82]
SiO2 Nanoparticles Effect of SiO2 nanoparticles on wax formation, morphology, and rheological behavior in crude oil:An experimental study [Volume 6, Issue 1, 2022, Pages 33-48]
Size of Tire Parts Effect of Size of tire parts and Mazut Addition on Simultaneous Pyrolysis of Used Tire and Mazut [Volume 3, Issue 4, 2019, Pages 13-24]
Small molecule Evaluating the Metabolic Activity of Aspergillus niger for Organic Acid Production Considering the Impact of Small Molecules in Culture Media [Volume 7, Issue 3, 2023, Pages 49-66]
Smart water Experimental Investigation of Acidic Medium Effect on Seawater and Low Salinity Water for Wettability Alteration and Interfacial Tension Reduction: The Presence of Divalent and Trivalent Cations [Volume 7, Issue 1, 2023, Pages 47-59]
SMOTE Real-time Drilling Event Detection Based on Mud-logging data Using Long Short Term Memory Neural Networks [Volume 8, Issue 1, 2024, Pages 26-35]
Sodium chloride Study on Stability of Laponite Nanoparticles Suspensions in Electrolyte Media [Volume 1, Issue 2, 2017, Pages 25-37]
Soft Sensor Development of an adaptive soft sensor for real-time monitoring of gas composition: Implementation on the azeotropic distillation column of the vinyl acetate monomer production process [Volume 8, Issue 3, 2024, Pages 17-28]
Solar Steam Generation Water desalination using solar steam generation systems based on graphite photothermal material [Volume 6, Issue 1, 2022, Pages 49-61]
Solar Steam Generation Improving the performance of graphite-based solar water desalination system by using plasmonic nickel nanoparticles and engineering the structure [Volume 6, Issue 3, 2022, Pages 75-85]
Solubility Determination of the solubility of anticancer drugs in supercritical carbon dioxide using empirical models and artificial neural network [Volume 5, Issue 4, 2021, Pages 15-37]
Solution oxidation method Investigation of effective parameters on synthesis of Goethite with solution oxidation method in the laboratory scale [Volume 6, Issue 4, 2022]
Solvent extraction Solvent extraction of Ce(IV) from sulfuric acid solutions using Cyanex 921 and its mixtures with D2EHPA [Volume 5, Issue 1, 2021, Pages 87-103]
Sour gas Effect of Operating Parameters on the Injection of Carbon Dioxide and Sour Gas as Cushion Gas in the Process of Underground Hydrogen Gas Storage [Volume 8, Issue 1, 2024, Pages 3-11]
Sour water Removal of Hydrogen Sulfide [Volume 3, Issue 1, 2019, Pages 29-46]
South Pars Gas Refinery Process Design and Economic Analysis of Power Generation from Flare Gases of South Pars Gas Refinery (phase 22-24) [Volume 7, Issue 4, 2023, Pages 95-107]
Specific Surface Area Investigation of Lignin-based activated carbon synthesis parameters on its structural properties [Volume 5, Issue 3, 2021, Pages 71-81]
Spiral tube Experimental investigating the effect of adding of graphene on the improvement of convective heat transfer coefficient of water/ethylene glycol system in laminar flow [Volume 2, Issue 3, 2018, Pages 3-19]
Stability Study on Stability of Laponite Nanoparticles Suspensions in Electrolyte Media [Volume 1, Issue 2, 2017, Pages 25-37]
Stability Feasibility Study and Microscopic Investigation of the Mechanism of Enhanced Oil Recovery Process Using Injection of Clay Nanoparticles into the Glass Micromodel [Volume 2, Issue 2, 2018, Pages 41-56]
Stability The effect of reaction parameters in phenol formaldehyde resin synthesis and the evaluation of product properties [Volume 6, Issue 4, 2022, Pages 23-32]
Starch Assessingthe crosslinking behavior of nanocomposites based on epoxy and starch-modified graphene oxide nanosheets potent to be applied as engineering coatings [Volume 1, Issue 1, 2017, Pages 61-70]
Static adsorption Study on adsorption behavior of dilute polymeric systems based on sulfonated polyacrylamide for improving oil recovery application [Volume 1, Issue 1, 2017, Pages 5-16]
Stirrer speed Toner production by in situ emulsion polymerization: Investigation of the effect of reaction temperature and stirrer speed [Volume 6, Issue 1, 2022, Pages 3-14]
Strain hardening Comparison of rheological behavior of LDPE in linear and nonlinear viscoelastic flow and using Multimode Pom-Pom model for prediction of uniaxial elongational flow [Volume 4, Issue 4, 2020, Pages 49-56]
Structural Similarity The degree of conformity of research subjects in the chemical engineering in Shahid Chamran University with Iran and the world [Volume 7, Issue 4, 2023, Pages 33-45]
Structure Branching Effect on Butylene Succinate and Ethylene Terephthalate Copolyesters: Synthesis and Properties [Volume 7, Issue 2, 2023, Pages 19-30]
Stuck pipe Real-time Drilling Event Detection Based on Mud-logging data Using Long Short Term Memory Neural Networks [Volume 8, Issue 1, 2024, Pages 26-35]
Styrene Butadiene Styrene Investigation of influence of the Styrene Butadiene Styrene on the properties of the Expandable Poly Styrene and simulation of its laboratory data via Artificial Neural Networks [Volume 5, Issue 2, 2021, Pages 105-116]
Supercritical extraction Investigation of Optimum Condition of Saponin Extraction by Carbon Dioxide Super Critical Fluid and Solvent [Volume 4, Issue 4, 2020, Pages 67-76]
Supercritical water Synthesis and Characterization of CexZr1-xO2 using Supercritical Water [Volume 3, Issue 4, 2019, Pages 3-12]
Support acidity Investigating of Treated Natural Zeolite as a Catalyst Support for Propane Oxidative Dehydrogenation Process [Volume 6, Issue 2, 2022, Pages 15-26]
Supported liquid membrane Performance evaluation of Pebax/ deep eutectic solvent supported liquid membrane in carbon dioxide separation [Volume 8, Issue 2, 2024, Pages 13-23]
Surface energy Direct modification of polyethylene surfaces using non-equilibrium gliding arc plasma with air at atmospheric pressure [Volume 7, Issue 4, 2023, Pages 15-32]
Surface roughness Synthesis and properties of super hydrophobic silica aerogel/basalt fibers blanket by ambient drying method [Volume 1, Issue 1, 2017, Pages 31-38]
Surface roughness The Effect of JP4 on Friction between NBR and Aluminum in Different Roughness [Volume 2, Issue 1, 2018, Pages 19-29]
Surface roughness Direct modification of polyethylene surfaces using non-equilibrium gliding arc plasma with air at atmospheric pressure [Volume 7, Issue 4, 2023, Pages 15-32]
Surface tension A Comparison Between Performance of Produced Biosurfactant and Conventional Chemical Surfactants in Enhanced Heavy Oil Recovery [Volume 3, Issue 1, 2019, Pages 69-80]
Suspension Study on Stability of Laponite Nanoparticles Suspensions in Electrolyte Media [Volume 1, Issue 2, 2017, Pages 25-37]
Synechocystis Applying a system-oriented method for culture medium design to improve bio-ethanol production by synechocystis [Volume 3, Issue 2, 2019, Pages 55-67]
Synergetic effect Solvent extraction of Ce(IV) from sulfuric acid solutions using Cyanex 921 and its mixtures with D2EHPA [Volume 5, Issue 1, 2021, Pages 87-103]
Synthesis Effect of Component of Preformed Particle Gels on Swelling Ratio [Volume 2, Issue 4, 2018, Pages 1-17]
Synthesis Experimental investigation of Fe3O4 and Activated Carbon effect on the and heavy oil upgrading process by Electromagnetic heating [Volume 7, Issue 1, 2023, Pages 3-15]
Synthesis of resole The effect of reaction parameters in phenol formaldehyde resin synthesis and the evaluation of product properties [Volume 6, Issue 4, 2022, Pages 23-32]

T

Tack Evaluation of Tack and Shear Strength of Pressure-Sensitive Adhesives Comprised of Polyurethane and Acrylic Copolymer Blend [Volume 5, Issue 4, 2021, Pages 55-67]
Taguchi method Optimization of anti- Corrosion of Epoxy/Zinc Phosphate and Nano Silica coating [Volume 4, Issue 2, 2020, Pages 35-51]
Targeted delivery Design of Magnetic Chitosan nanoparticles for Targeted Cancer Therapy using 5-Fluorouracil in Glycerol-Moonoleate [Volume 2, Issue 1, 2018, Pages 45-56]
Tear strength Optimization of tear resistance and compression set at rubber spring based on EPDM/NR alloy [Volume 4, Issue 1, 2020, Pages 107-91]
Temperature Experimental study of temperature and permeability effect on polymer flooding [Volume 6, Issue 3, 2022, Pages 19-28]
Temperature and pressure effects Effect of Drying Temperature and Mechanical Pressure on Surface Structure and Dynamical Properties of Polyaniline Nanostructured Film [Volume 2, Issue 2, 2018, Pages 3-16]
Temperature Changes Temperature Changes in Oil Wells and Its Effect on Tubulars Stress Condition [Volume 5, Issue 3, 2021, Pages 12-3]
Temperature control Fuzzy Control of Semibatch Poly(ethylene terephthalate) Reactor Temperature based on Linguistic Rules [Volume 4, Issue 3, 2020, Pages 68-57]
Tensile strength Crosslinking Poly(Îµ-caprolactone) with benzoyl peroxide by thermal method for making radiotherapy masks [Volume 6, Issue 2, 2022, Pages 55-68]
Terminal velocity Experimental study of the mass transfer effect on the hydrodynamics of single drops in the chemical system of normal butanol/succinic acid/water [Volume 8, Issue 2, 2024, Pages 34-42]
Thermal Performance A comprehensive review on the application of nanoparticles in the matrix of phase change materials to improve thermal properties for energy management and storage [Volume 7, Issue 4, 2023, Pages 63-93]
Thermal properties Effect of Drying Temperature and Mechanical Pressure on Surface Structure and Dynamical Properties of Polyaniline Nanostructured Film [Volume 2, Issue 2, 2018, Pages 3-16]
Thermal properties Effect of Coal Tar Pitch on Improvement of Thermal Insulation Performance of Carbon Aerogels Based on Novolac Resin [Volume 2, Issue 4, 2018, Pages 53-64]
Thermal properties The Effects of Cooling Method on Final Mechanical and Thermal Properties of Polyethylene Tanks Manufactured by Rotational Molding [Volume 4, Issue 4, 2020, Pages 23-31]
Thermal stability An Investigation on the Effect of Silica Filler and Waste Tire Powder Toughener on Mechanical and Thermal Properties of Epoxy Based Adhesives [Volume 2, Issue 2, 2018, Pages 57-73]
Thermal stability A review on Nanocomposite Hydrogels: Rheology, Morphology, and Applications [Volume 3, Issue 3, 2019, Pages 3-38]
Thermal stability An Investigation on the Effect of Nylon 6,6 and Phenolic Resin on Mechanical and Thermal Properties of Epoxy Based Adhesives [Volume 3, Issue 3, 2019, Pages 81-92]
Thermal stability Synthesis and characterizations of polyvinyl alcohol-graphite electrospun nanofibers [Volume 4, Issue 4, 2020, Pages 77-88]
Thermal treatment Preparation of silica powder from rice husk by thermal treatment and comparison of its performance with commercial silica in blend of passenger radial tire belt [Volume 4, Issue 3, 2020, Pages 80-69]
Thermal Water Desalination Water desalination using solar steam generation systems based on graphite photothermal material [Volume 6, Issue 1, 2022, Pages 49-61]
Thermodynamic Study on adsorption behavior of dilute polymeric systems based on sulfonated polyacrylamide for improving oil recovery application [Volume 1, Issue 1, 2017, Pages 5-16]
Thermo-Oxidative Degradation The Effects of Cooling Method on Final Mechanical and Thermal Properties of Polyethylene Tanks Manufactured by Rotational Molding [Volume 4, Issue 4, 2020, Pages 23-31]
Thin layer membrane Exploring the performance of a composite membrane with a nanometer-thin selective layer of chitosan-gallic acid for the separation of carbon dioxide [Volume 7, Issue 4, 2023, Pages 47-61]
Thiourea Use of functionalized superparamagnetic nanoparticles with Thiourea as heterogeneous catalysts in Petasis-Borono Mannich reaction [Volume 6, Issue 1, 2022, Pages 77-89]
Thomas and Yoon-Nelson Fixedâbed column studies of nitrate ion adsorption using modified montmorillonite adsorbent [Volume 4, Issue 4, 2020, Pages 89-105]
Thymol Applying Artificial Neural Network in Prediction behavior of alkylation of m-Cresol with isopropanol process and yield optimization by Bee Colony algorithm [Volume 5, Issue 4, 2021, Pages 69-78]
Time-temperature superposition principles Lifetime Prediction of EPDM Rubber Seals Using Time-Temperature Superposition Principle and the Effect of Nanoparticles Loading on It [Volume 7, Issue 3, 2023, Pages 29-48]
Tire Preparation of silica powder from rice husk by thermal treatment and comparison of its performance with commercial silica in blend of passenger radial tire belt [Volume 4, Issue 3, 2020, Pages 80-69]
Titania Nanostructures Oxidative Dehydrogenation of Propane with CO2 Oxidant over vanadium catalyst supported on Titania-Silicon Nanostructures [Volume 2, Issue 4, 2018, Pages 65-74]
Titanium oxide modification Photocatalytic Reduction of Carbon dioxide to Renewable Methane using Titanium dioxide modified with Bismuth and Copper [Volume 4, Issue 3, 2020, Pages 55-43]
Total Capital Investment Simulation and Techno-Economic analysis of Hydrotreating Process of Mazut [Volume 5, Issue 1, 2021, Pages 17-30]
Triflunomide Designing a Teriflunomide slow-release system based on a biodegradable composite scaffold poly (glycerin sebacic acid)-co-poly(Îµ-caprolactone-diol) [Volume 8, Issue 1, 2024, Pages 58-69]
Trifluoralin Synthesis of Zirconium-Based Coordination Polymer Luminescence Nanosensor for Detection of Trifluralin Herbicide [Volume 7, Issue 3, 2023, Pages 77-87]
Trivalent cation Experimental Investigation of Acidic Medium Effect on Seawater and Low Salinity Water for Wettability Alteration and Interfacial Tension Reduction: The Presence of Divalent and Trivalent Cations [Volume 7, Issue 1, 2023, Pages 47-59]
Tubing Temperature Changes in Oil Wells and Its Effect on Tubulars Stress Condition [Volume 5, Issue 3, 2021, Pages 12-3]

V

Vacuum pressure Control of flooding phenomena in vacuum distillation tray column using operational and laboratory parameters [Volume 5, Issue 2, 2021, Pages 51-63]
Vacuum Residue Statistical Modeling and Optimization of the Effective Parameters in Precipitation of Asphaltene from Vacuum Residue by Industrial Solvents [Volume 4, Issue 4, 2020, Pages 3-21]
Value chain Assessment of Investment Opportunities in Iranian Petrochemical Industry through Integrated Technical, Economic and Financial Modeling of the Entire Network of Petrochemical Units [Volume 8, Issue 2, 2024, Pages 1-12]
VAM process Development of an adaptive soft sensor for real-time monitoring of gas composition: Implementation on the azeotropic distillation column of the vinyl acetate monomer production process [Volume 8, Issue 3, 2024, Pages 17-28]
Vapor reforming reaction Modeling of a synthesis gas production reactor using Aspen plus [Volume 5, Issue 2, 2021, Pages 3-15]
Venturi scrubber Performance assessment of the hybrid nanofluid mixture of iron oxide nanoparticles and graphene nanosheets in the elimination of CO2 from the air, using a venturi scrubber [Volume 6, Issue 2, 2022, Pages 69-79]
Vinyl ferrocene Poly (Vinyl Ferrocene)/Hydroxyl terminated polybutadiene (PVF/HTPB) blend as a Catalyst: Preparation, Characterization and Comparison [Volume 5, Issue 4, 2021, Pages 79-90]
Viscoelasticity Evaluation of Tack and Shear Strength of Pressure-Sensitive Adhesives Comprised of Polyurethane and Acrylic Copolymer Blend [Volume 5, Issue 4, 2021, Pages 55-67]
Viscosity Feasibility Study and Microscopic Investigation of the Mechanism of Enhanced Oil Recovery Process Using Injection of Clay Nanoparticles into the Glass Micromodel [Volume 2, Issue 2, 2018, Pages 41-56]
Viscosity Studying experimental data related to change in viscosity of crude oil [Volume 2, Issue 2, 2018, Pages 75-89]
Viscosity Investigation the effect of NCO/OH ratio, amount and type of curing catayst on the Pot life of HTPB based binder system [Volume 2, Issue 3, 2018, Pages 65-76]
Viscosity Modeling Viscosity of Ionic Liquids and Akanolamines Mixtures Using Peng-Robinson and Soave-Redlich-Kwong Equation of States with Friction Theory [Volume 5, Issue 4, 2021, Pages 39-54]
Viscosity Experimental investigation of Fe3O4 and Activated Carbon effect on the and heavy oil upgrading process by Electromagnetic heating [Volume 7, Issue 1, 2023, Pages 3-15]
Viscosity Chemorheological Investigation on The Effect of Three Polymerization Retardants on Hydroxyl Terminated Poly butadiene-based Polyurethane-Forming Rate [Volume 7, Issue 1, 2023, Pages 17-31]
Volatile Organic Compounds (VOCs) Based Detector a of Development and Design for Composite CNT)/Acid Lactic(Poly on Compounds Organic Volatile of Detecti [Volume 3, Issue 4, 2019, Pages 43-56]
VOLTAGE CONTROL Voltage control of Two-chamber microbial fuel using classical PI and MPC controller [Volume 3, Issue 2, 2019, Pages 43-53]
VOSviewer The degree of conformity of research subjects in the chemical engineering in Shahid Chamran University with Iran and the world [Volume 7, Issue 4, 2023, Pages 33-45]

W

Wastewater treatment Fabrication of nanocomposite membrane based on polysulfone and modified Titanium oxide nanoparticles and its performance in industrial wastewater treatment using osmotic membrane bioreactor process [Volume 6, Issue 3, 2022, Pages 61-73]
Water Application of Molecularly Imprinted Film for Extraction of Herbicide Mecoprop from Aqueous Sample [Volume 2, Issue 3, 2018, Pages 77-89]
Water Desalination Improving the performance of graphite-based solar water desalination system by using plasmonic nickel nanoparticles and engineering the structure [Volume 6, Issue 3, 2022, Pages 75-85]
Water-redispersibility Preparation and Improvement of Shear Strength of a Water-Redispersible Waterborne Acrylic Adhesive for Making Cellulose Joints [Volume 3, Issue 1, 2019, Pages 47-57]
Water Steam Modeling the Application of Steam Produced by a Boiler-based Waste Incinerator to Disable Catalyst in the Production of Linear Polyethylene (LLDPE) in Lorestan Petrochemical Complex [Volume 3, Issue 1, 2019, Pages 81-92]
Water-Uptake Water Uptake Improvement in Hygiene Papers by NanoHydrogel Prepared from Chitosan/Nano silver/ PolyAcrylic Acid Composite [Volume 3, Issue 3, 2019, Pages 51-60]
Water vapor permeability Optimization of ternary blends based on poly (lactic acid) according to physical and biological properties [Volume 4, Issue 1, 2020, Pages 66-53]
Wax Effect of SiO2 nanoparticles on wax formation, morphology, and rheological behavior in crude oil:An experimental study [Volume 6, Issue 1, 2022, Pages 33-48]
Wax Appearance Temperature Effect of SiO2 nanoparticles on wax formation, morphology, and rheological behavior in crude oil:An experimental study [Volume 6, Issue 1, 2022, Pages 33-48]
Wettability Impact of Aqueous Phase Ion Type and Concentration on Calcite Surface Wettability and Acidic Oil-Brine IFT [Volume 4, Issue 2, 2020, Pages 19-34]
Wettability alteration Experimental Investigation and Modeling of AOT Surfactant Adsorption on Carbonate Rock Particles [Volume 3, Issue 3, 2019, Pages 39-50]
Wettability alteration Experimental Investigation of Acidic Medium Effect on Seawater and Low Salinity Water for Wettability Alteration and Interfacial Tension Reduction: The Presence of Divalent and Trivalent Cations [Volume 7, Issue 1, 2023, Pages 47-59]
Wheat starch Study of the rheological and compatibility behavior of sulfonated acrylamide copolymer/ wheat starch blends in aqueous media [Volume 3, Issue 2, 2019, Pages 15-27]
Wound Dressing Design, fabrication and characterization of electrospun wound dressing composed of polyvinyl alcohol/Aloe Vera [Volume 4, Issue 2, 2020, Pages 83-93]

Home

Guide for Authors

Submit Manuscript

Reviewers

Contact Us

Keyword Index

A

B

C

D

E

F

G

H

I

J

K

L

M

N

O

P

R

S

T

U

V

W

X

Y

Z

Home

Guide for Authors

Browse

Journal Info

Submit Manuscript

Reviewers

Contact Us

Keyword Index

A

B

C

D

E

F

G

H

I

J

K

L

M

N

O

P

R

S

T

U

V

W

X

Y

Z