[1] Lade R., Wasewar K., Sangtyani R., Kumar A., Shende D. and Peshwe D., Effect of aluminum nanoparticles on rheological behavior of HTPB-based composite rocket propellant, J. Energ. Mater., 16, 1-16, 2018
[2] Sekkar V., Ambika D. and Ninan K., Rheo‐Kinetic Evaluation on the Formation of Urethane Networks Based on Hydroxyl‐Terminated Polybutadiene, J. Appl. Polym. Sci., 79, 1869-1876, 2001
[3] Rao M., Scariah K., VargheseA., Naik P., Swamy K. and Sastri K., Evaluation of Criteria for Blending Hydroxy Terminated Polybutadiene (HTPB) Polymers Based on Viscosity Build-Up and Mechanical Properties of Gumstock, Eur. Polym. J., 36, 1645-1651, 2000
[4] Mahanta A. and Monika G., Analysis of Torque-Time Profile of Composite Propellant Slurry: Isothermal Cure Kinetics and Evaluation of Pot Life, J. Ind. Council Chem., 26, 94-99, 2009
[5] Sekkar V. and Raunija T. S. K., Hydroxyl-Terminated Polybutadiene-Based Polyurethane Networks as Solid Propellant Binder-State of the Art, J. Propul. Power., 31, 16-35, 2014
[6] Mahanta A. K., Dharmsaktu I. and Pattnayak P. K., Rheological Behaviour of HTPB-Based Composite Propellant: Effect of Temperature and Pot Life on Casting Rate, Defence Sci. J., 57, 435-442, 2007
[7] Korah Bina C., Kannan K. G. and Ninan K. N., DSC Study on the Effect of Isocyanates and Catalysts on the HTPB Cure Reaction, J. Therm. Anal. Calorim., 78.3, 753-760, 2004
[8] Maggi F., Curing Viscosity of HTPB‐Based Binder Embedding Micro and Nano‐Aluminum Particles, Propellants. Explos. Pyrotech., 39, 755-60, 2014
[9] Lucio B. and Fuente J. L,. Rheological cure characterization of an advanced functional polyurethane, Thermochim. Acta., 19, 6-13, 2014
[10] Lucio B. and de la Fuente J.L., Kinetic and chemorheological modelling of the polymerization of 2, 4-Toluenediisocyanate and ferrocene-functionalized hydroxyl-terminated polybutadiene, Polym., 140, 290-303, 2018
[11] Guo J., Chai T., Liu Y., Cui J., Ma H., Jing S., Zhong L., Qin S., Wang G. and Ren X., Kinetic Research on the Curing Reaction of Hydroxyl-Terminated Polybutadiene Based Polyurethane Binder System via FT-IR Measurements, Coat., 8, 175-184, 2018
[12] Jawalkar S. N., Studies on The Effect of Plasticiser and Addition of Toluene Diisocyanate at Different Temperatures in Composite Propellant Formulations, J. Hazard. Mater., 164.2, 549-554, 2009
[13] Mahanta A. K., Monika G. and Devendra D. P., Rheokinetic Analysis of Hydroxy Terminated Polybutadiene Based Solid Propellant Slurry, J. Chem., 7.1, 171-179, 2010
[14] Mahanta A. and Goyal M., Analysis Of Torque-Time Profile Of Composite Propellant Slurry: Isothermal Cure Kinetics And Evaluation Of Pot Life, J. Ind. Council Chem., 26, 94-99, 2009
[15] Chai T., Liu Y.C., Ma H., Yu Y.W., Yuan J.M., Wang J.H. and Guo J.H., Rheokinetic Analysis on the Curing Process of HTPB-DOA-MDI Binder System, IOP Conference Series: Mater. Sci. Eng, Hangzhou, China., 4, 1-8, 2016
[16] Sekkar V. and Raunija T. S. K., Issues Related with Pot Life Extension for Hydroxyl-Terminated Polybutadiene-Based Solid Propellant Binder System, Propellants. Explos. Pyrotech., 40, 267-274, 2015
[17] Ducruet N., Delmotte L., Schrodj G., Stankiewicz F., Desgardin N., Vallat M. F. and Haidar B., Evaluation of hydroxyl terminated polybutadiene‐isophorone diisocyanate gel formation during crosslinking process, J. Appl. Polym. Sci., 128, 436-443, 2013
[18] Kurva R., Gupta G., Dhabbe K. I., Jawale L. S., Kulkarni P. S. and Maurya M., Evaluation of 4-(Dimethylsilyl) Butyl Ferrocene GrGafted HTPB as a Burning Rate Modifier in Composite Propellant Formulation using Bicurative System, Propellants. Explos. Pyrotech., 42, 401-409, 2017
[19] Jawalkar S. N., Kurva R., Singh P. P. and Bhattacharya B., Influence of bicurative on processibility of composite propellant, Defence Sci. J., 57, 669-678, 2007
[20] Delebecq E., Pascault J. P., Boutevin B. and Ganachaud F. O., On the Versatility of Urethane/Urea Bonds: Reversibility, Blocked Isocyanate, and Non-Isocyanate Polyurethane, Chem. Rev., 113, 80-118, 2012
[21] Sekkar V., Venkatachalam S. and Ninan K. N., Rheokinetic Studies on the Formation of Urethane Networks Based on Hydroxyl Terminated Polybutadiene, Eur. Polym. J., 38.1, 169-178, 2002
[22] Muthiah R., Krishnamurthy V. and Gupta B., Rheology of HTPB Propellant: Development of Generalized Correlation and Evaluation of Pot Life, Propellants. Explos. Pyrotech., 21, 186-192, 1996
[23] Kebritchi A. and Mohamad Taghi Nejad H., A Short Review on Effect of Process Parameters on Composite Solid Propellant Pot Life
Based on Hydroxyl Terminated Polybutadiene, J. Sci. Basparesh., 2, 52-62, 2018
[23] Kebritchi A. and Mohamad Taghi Nejad H., A Short Review on Effect of Material Parameters on Composite Solid Propellant Pot Life
Based on Hydroxyl Terminated Polybutadiene, J. Sci. Basparesh., 2018
[25] Brookfield, “Brookfield Dial Viscometer Operating Instructions Manual No. M 14-023.” 2016.
[26] Vesna R. and Mirjana P., The Effect of Curing Agents on Solid Composite Rocket Propellant Characteristics, Sci.Tech. Rev., 55.1, 46-50, 2005
[27] Wingborg N., Improving the Mechanical Properties of Composite Rocket Propellants, Fiber- Polym., 14, 1-7, 2004
[28] Wingborg N., Increasing the Tensile Strength of HTPB with Different Isocyanates and Chain Extenders, Polym. Test., 21, 283-287, 2002
[29] Sekkar V., Alex A. S., Kumar V. and Bandyopadhyay G., Theoretical Evaluation of Crosslink Density of Chain Extended Polyurethane Networks Based on Hydroxyl Terminated Polybutadiene and Butanediol and Comparison with Experimental Data, J. Energ. Mater., 15, 1-10, 2017
[30] Yamazaki K. and Tokui H., The Cross-linking Reaction of the Poly butadiene Binder for Composite Propellants, Bull. Chem. Soc. Jpn., 12, 2174-2178, 1965
[31] Sekkar V., Comparison Between Crosslink Densities Derived from Stress–Strain Data and Theoretically Data Evaluated Through the Α‐Model Approach for a Polyurethane Network System Based on Hydroxyl Terminated Polybutadiene and Isophorone‐Diisocyanate, J. Appl. Polym. Sci., 2, 920-925, 2010
[32] Jain S., Sekkar V. and Krishnamurthy V., Mechanical and swelling properties of HTPB‐based copolyurethane networks, J. Appl. Polym. Sci., 9, 1515-1523, 1993
[33] Tokui H. and Iwama A., Pot Life Problem and its Measure with a Reduced Smoke Propellant Production, Propellants. Explos. Pyrotech., 3, 105-109, 1991
[34] Haska S. B., Bayramli E., Pekel F. and Oezkar S., Mechanical properties of HTPB-IPDI-based Elastomers, J. Appl. Polym. Sci., 12, 2347-2355, 1997
