AAbedi Bafrajerd, Abdollah Water Uptake Improvement in Hygiene Papers by NanoHydrogel Prepared from Chitosan/Nano silver/ PolyAcrylic Acid Composite [Volume 3, Issue 3, 2019, Pages 51-60]
Aalaie, Jamal Study on adsorption behavior of dilute polymeric systems based on sulfonated polyacrylamide for improving oil recovery application [Volume 1, Issue 1, 2017, Pages 5-16]
Aalaie, Jamal Study on Stability of Laponite Nanoparticles Suspensions in Electrolyte Media [Volume 1, Issue 2, 2018, Pages 25-37]
Aalaie, Jamal Effect of hydrophobic modification of scleroglucan on its adsorption behavior onto carbonate rock surface of oil reservoir [Volume 2, Issue 3, 2019, Pages 51-64]
Aalaie, Jamal Study of the rheological and compatibility behavior of sulfonated acrylamide copolymer/ wheat starch blends in aqueous media [Volume 3, Issue 2, 2019, Pages 15-27]
Abbasi, Ali Evaluation of propane dehydrogenation catalysts: catalyst development, chemistry, and challenges [Volume 7, Issue 2, 2023, Pages 17-37]
Abbasi, Mashhood Optimization of tear resistance and compression set at rubber spring based on EPDM/NR alloy [Volume 4, Issue 1, 2020, Pages 107-91]
Abbasi, Mashhood Effect of swelling on the electrical behavior of nitrile/graphite rubber composite and break down of graphite network [Volume 4, Issue 3, 2020, Pages 13-3]
Abbaspour, Seyed Foad Cr (VI) Adsorption Using synthesis Novel UIO-66-MnFe2O4-TiO2 Magnetic Nanoparticles by Experimental Design [Volume 4, Issue 4, 2021, Pages 33-48]
Abbaszadeh, Ali The Effects of Cooling Method on Final Mechanical and Thermal Properties of Polyethylene Tanks Manufactured by Rotational Molding [Volume 4, Issue 4, 2021, Pages 23-31]
Abdoljavadi, Alireza The Effects of Cooling Method on Final Mechanical and Thermal Properties of Polyethylene Tanks Manufactured by Rotational Molding [Volume 4, Issue 4, 2021, Pages 23-31]
Abdoos, Hassan Epoxy Modification by Polyurethane and Its Effects on Abrasion and Adhesion Properties [Volume 5, Issue 3, 2021, Pages 83-94]
Abedini, Reza Effect of MIL-53 metal organic frameworks on performance of Pebax/PEG mixed matrix membrane for CO2/CH4 separation [Volume 3, Issue 3, 2019, Pages 69-79]
Abedini, Reza Investigation of performance of Pebax/ Poly(vinyl alcohol) blend membrane for carbon dioxide separation from nitrogen [Volume 3, Issue 4, 2020, Pages 57-71]
Abedini, Reza Performance evaluation of Pebax/ deep eutectic solvent supported liquid membrane in carbon dioxide separation [Volume 8, Issue 2, 2024, Pages 13-23]
Abu-Bakri, Jalal Optimum allocation of carbon dioxide and nitrogen gas between wells of an oil field in the artificial gas lift process [Volume 7, Issue 2, 2023, Pages 59-71]
Adloo, Hadi The experimental study of the effect of polyacrylamide nanocomposite on reservoir rock and fluid properties in presence of formation water [Volume 3, Issue 2, 2019, Pages 29-41]
Afshari, Marzieh Toner production by in situ emulsion polymerization: Investigation of the effect of reaction temperature and stirrer speed [Volume 6, Issue 1, 2022, Pages 3-14]
Aghaei, Maryam The degree of conformity of research subjects in the chemical engineering in Shahid Chamran University with Iran and the world [Volume 7, Issue 4, 2023, Pages 33-45]
Aghayari, Sedigheh Measuring the porosity of PA6 nanofibers prepared via hybrid electrospinning after the dissolution of PVA component and effect of some parameters on it [Volume 4, Issue 2, 2020, Pages 95-106]
Ahmadi, Goodarz Optimum allocation of carbon dioxide and nitrogen gas between wells of an oil field in the artificial gas lift process [Volume 7, Issue 2, 2023, Pages 59-71]
Ahmadi, Hajar Designing a Teriflunomide slow-release system based on a biodegradable composite scaffold poly (glycerin sebacic acid)-co-poly(ε-caprolactone-diol) [Volume 8, Issue 1, 2024, Pages 58-69]
Ahmadi, Vahid Preparation of Poly(dimethylsiloxane) Microparticles via a Co-flow Microfluidic Device and Investigation of Various Parameters Effect on Morphology [Volume 4, Issue 3, 2020, Pages 26-15]
Ahmadi, Vahid Improving the performance of graphite-based solar water desalination system by using plasmonic nickel nanoparticles and engineering the structure [Volume 6, Issue 3, 2022, Pages 75-85]
Ahmadi-Dehnoei, Ali Preparation and Improvement of Shear Strength of a Water-Redispersible Waterborne Acrylic Adhesive for Making Cellulose Joints [Volume 3, Issue 1, 2019, Pages 47-57]
Akbari, Iman Experimental investigating the effect of adding of graphene on the improvement of convective heat transfer coefficient of water/ethylene glycol system in laminar flow [Volume 2, Issue 3, 2019, Pages 3-19]
Akbari, Mona Removal of Iodide from Wastewater Using Strongly Basic Anion Resin [Volume 7, Issue 2, 2023, Pages 31-46]
Alamdar milani, Saeid Leaching and recovery of selenium from Sar-cheshmeh copper anode slimes [Volume 5, Issue 1, 2021, Pages 57-67]
Alamdar Milani, Saeed Solvent extraction of Ce(IV) from sulfuric acid solutions using Cyanex 921 and its mixtures with D2EHPA [Volume 5, Issue 1, 2021, Pages 87-103]
Aliakbari, Maryam An Investigation on the Effect of Nylon 6,6 and Phenolic Resin on Mechanical and Thermal Properties of Epoxy Based Adhesives [Volume 3, Issue 3, 2019, Pages 81-92]
Alimohammadi, Saman Effect of Size of tire parts and Mazut Addition on Simultaneous Pyrolysis of Used Tire and Mazut [Volume 3, Issue 4, 2020, Pages 13-24]
Alizadeh, Gholamreza Effect of MIL-53 metal organic frameworks on performance of Pebax/PEG mixed matrix membrane for CO2/CH4 separation [Volume 3, Issue 3, 2019, Pages 69-79]
Alizadeh, Omid Experimental study of temperature and permeability effect on polymer flooding [Volume 6, Issue 3, 2022, Pages 19-28]
Almasganj, Ali Crosslinking Poly(ε-caprolactone) with benzoyl peroxide by thermal method for making radiotherapy masks [Volume 6, Issue 2, 2022, Pages 55-68]
Alvand, Ehsan Study on adsorption behavior of dilute polymeric systems based on sulfonated polyacrylamide for improving oil recovery application [Volume 1, Issue 1, 2017, Pages 5-16]
Amani, Mitra Determination of the solubility of anticancer drugs in supercritical carbon dioxide using empirical models and artificial neural network [Volume 5, Issue 4, 2021, Pages 15-37]
Amini, Amin Poly (Vinyl Ferrocene)/Hydroxyl terminated polybutadiene (PVF/HTPB) blend as a Catalyst: Preparation, Characterization and Comparison [Volume 5, Issue 4, 2021, Pages 79-90]
Amirabedi, Parya Investigation of different methods of increasing membrane performance for oxygen/nitrogen separation [Volume 6, Issue 2, 2022, Pages 27-54]
Arabpour Roghabadi, Farzaneh Preparation of Poly(dimethylsiloxane) Microparticles via a Co-flow Microfluidic Device and Investigation of Various Parameters Effect on Morphology [Volume 4, Issue 3, 2020, Pages 26-15]
Arabpour Roghabadi, Farzaneh Water desalination using solar steam generation systems based on graphite photothermal material [Volume 6, Issue 1, 2022, Pages 49-61]
Arjomand, Alireza Process Design and Economic Analysis of Power Generation from Flare Gases of South Pars Gas Refinery (phase 22-24) [Volume 7, Issue 4, 2023, Pages 95-107]
Arshadi, Mahdokht Cu biorecovery from electronic wastes without daily pH adjusting using Acidithiobacillus ferrooxidans [Volume 2, Issue 1, 2018, Pages 57-65]
Asadi, Reza Cr (VI) Adsorption Using synthesis Novel UIO-66-MnFe2O4-TiO2 Magnetic Nanoparticles by Experimental Design [Volume 4, Issue 4, 2021, Pages 33-48]
Asadi, Reza Statistical modeling and optimization of low-temperature oxidation dehydrogenation of propane process using manganese catalyst based on CuBTC organic metal framework [Volume 6, Issue 1, 2022, Pages 15-32]
Asadzadeh, Naser Rheological properties evaluation of hydrogels based on xanthan polymer in the presence of nanoparticles [Volume 7, Issue 3, 2023, Pages 67-76]
Asefnejad, Azadeh Fabrication of nanocomposite scaffold based on bacterial cellulose/zinc oxide nanoparticles/polypyrrole with antibacterial and cytotoxicity assessment [Volume 5, Issue 2, 2021, Pages 37-50]
Asgarzadeh, Maryam Design of Magnetic Chitosan nanoparticles for Targeted Cancer Therapy using 5-Fluorouracil in Glycerol-Moonoleate [Volume 2, Issue 1, 2018, Pages 45-56]
Asgharinezhad, Aliakbar EDTA-functionalized Fe3O4@SiO2 magnetic nanoadsorbent for divalent cadmium removal from aqueous solutions [Volume 5, Issue 3, 2021, Pages 95-106]
Asgharinezhad, Aliakbar Silica nanoparticles extracted from rice husk and functionalized with dendrimer as an effective recyclable adsorbent to remove divalent cadmium from aqueous solutions [Volume 6, Issue 1, 2022, Pages 63-76]
Ashtianifar, Mehdi Solvent extraction of Ce(IV) from sulfuric acid solutions using Cyanex 921 and its mixtures with D2EHPA [Volume 5, Issue 1, 2021, Pages 87-103]
Ataeefard, Maryam Toner production by in situ emulsion polymerization: Investigation of the effect of reaction temperature and stirrer speed [Volume 6, Issue 1, 2022, Pages 3-14]
Atashzar, Mir Mohammad Statistical modeling and optimization of low-temperature oxidation dehydrogenation of propane process using manganese catalyst based on CuBTC organic metal framework [Volume 6, Issue 1, 2022, Pages 15-32]
Azargoon, Mohsen Investigation the effect of NCO/OH ratio, amount and type of curing catayst on the Pot life of HTPB based binder system [Volume 2, Issue 3, 2019, Pages 65-76]
Azimi, Hamidreza Optimization of mechanical properties of PP-polymer foam fabricated via extruder [Volume 5, Issue 1, 2021, Pages 105-120]
Azimi, Meghdad Investigation of effective parameters on synthesis of Goethite with solution oxidation method in the laboratory scale [Volume 6, Issue 4, 2022]
Azizi, Alireza Preparation and study of physical and mechanical behavior of polylactic acid bionanocomposites reinforced with Cellulose Nanocrystal and silver nanoparticles [Volume 5, Issue 3, 2021, Pages 25-13]
Azizi, Maryam Measurement of Surface and Shallow depth Changes of Polypropylene Due to Gliding Discharge Plasma [Volume 7, Issue 2, 2023, Pages 47-57]
Azizi, Zoha Experimental study of the mass transfer effect on the hydrodynamics of single drops in the chemical system of normal butanol/succinic acid/water [Volume 8, Issue 2, 2024, Pages 34-42]
B
Babazadegan, Mohammad Ali Applying a system-oriented method for culture medium design to improve bio-ethanol production by synechocystis [Volume 3, Issue 2, 2019, Pages 55-67]
Badinloo, Mehran Real-time Drilling Event Detection Based on Mud-logging data Using Long Short Term Memory Neural Networks [Volume 8, Issue 1, 2024, Pages 26-35]
Baghban Salehi, Mahsa Investigation of the performance of silica nanoparticles in increasing the strength of a polymer gel prepared by polyacrylamide in oil well condition [Volume 1, Issue 2, 2018, Pages 39-49]
Baghban-Salehi, Mahsa Rheological properties evaluation of hydrogels based on xanthan polymer in the presence of nanoparticles [Volume 7, Issue 3, 2023, Pages 67-76]
Bagheri, Fatemeh The effect of 5-fluorouracil loaded albumin magnetic nanoparticles on viability and cell cycle of human breast cancer MCF-7 cell line [Volume 5, Issue 1, 2021, Pages 31-41]
Bagheri, Gita Designing a Teriflunomide slow-release system based on a biodegradable composite scaffold poly (glycerin sebacic acid)-co-poly(ε-caprolactone-diol) [Volume 8, Issue 1, 2024, Pages 58-69]
Bahramian, Ahmad Reza Investigation of the performance of silica nanoparticles in increasing the strength of a polymer gel prepared by polyacrylamide in oil well condition [Volume 1, Issue 2, 2018, Pages 39-49]
Bahramian, Ahmad Reza Investigation of the Effect of Poly(vinyl chloride)-g-Poly(butyl acrylate) Brush Copolymer as Plasticizer on the Performance of the Poly(vinyl chloride) Films [Volume 8, Issue 4, 2025, Pages 1-11]
Bahramian, Alireza Impact of Aqueous Phase Ion Type and Concentration on Calcite Surface Wettability and Acidic Oil-Brine IFT [Volume 4, Issue 2, 2020, Pages 19-34]
BAHRAMIAN, ALIREZA Effect of Drying Temperature and Mechanical Pressure on Surface Structure and Dynamical Properties of Polyaniline Nanostructured Film [Volume 2, Issue 2, 2018, Pages 3-16]
BAHRAMIAN, ALIREZA Effect of Drying Temperature and Mechanical Pressure on Surface Structure and Dynamical Properties of Polyaniline Nanostructured Film [Volume 2, Issue 2, 2018, Pages 3-16]
Bahraminejad, Hossein Concentration-Behavioral, Adsorption, Flooding, Relative Permeability Studies of Polymer Nanocomposite in Two Reservoir Lithologies [Volume 5, Issue 1, 2021, Pages 69-86]
Bahrami panah, Niloofar Removal of nickel ions from aqueous solutions using theophylline-functionalized Fe3O4@SiO2 magnetic nanoparticles [Volume 8, Issue 3, 2024, Pages 40-49]
Bahramnia, Hamed Epoxy Modification by Polyurethane and Its Effects on Abrasion and Adhesion Properties [Volume 5, Issue 3, 2021, Pages 83-94]
Bakhtiari Ramezani, mahdieh Measurement of Surface and Shallow depth Changes of Polypropylene Due to Gliding Discharge Plasma [Volume 7, Issue 2, 2023, Pages 47-57]
Baniasadi, Hossein Experimental investigating the effect of adding of graphene on the improvement of convective heat transfer coefficient of water/ethylene glycol system in laminar flow [Volume 2, Issue 3, 2019, Pages 3-19]
Baniasadi, Hossein Fabrication of PVA/Gr/TiO2 adsorbent and study of its application in removal of malachite green [Volume 3, Issue 1, 2019, Pages 59-68]
Baniasadi, Hossein Design, fabrication and characterization of electrospun wound dressing composed of polyvinyl alcohol/Aloe Vera [Volume 4, Issue 2, 2020, Pages 83-93]
Barkhordari, Vahid Feasibility Study and Microscopic Investigation of the Mechanism of Enhanced Oil Recovery Process Using Injection of Clay Nanoparticles into the Glass Micromodel [Volume 2, Issue 2, 2018, Pages 41-56]
Bayat, Mehdi Study of the effect of operating parameters on the performance of acetylene hydrogenation reactors [Volume 5, Issue 2, 2021, Pages 91-104]
Bazgir, Saeed Study of the rheological and compatibility behavior of sulfonated acrylamide copolymer/ wheat starch blends in aqueous media [Volume 3, Issue 2, 2019, Pages 15-27]
Beolchini, Francessca Utilizing Yarrowia lipolytica supernatant for electric arc furnace dust bioleaching [Volume 7, Issue 2, 2023, Pages 3-16]
Biganeh, Ali Measurement of Surface and Shallow depth Changes of Polypropylene Due to Gliding Discharge Plasma [Volume 7, Issue 2, 2023, Pages 47-57]
Bijani, Abdolmotaleb Simulation and Optimization of Demercaptanization of Propane and Butane in South Pars Gas Refineries [Volume 3, Issue 2, 2019, Pages 3-14]
Borsalani, Ali Experimental study of the mass transfer effect on the hydrodynamics of single drops in the chemical system of normal butanol/succinic acid/water [Volume 8, Issue 2, 2024, Pages 34-42]
C
Chaychi, Mania Optimization of Gelatin/PEG Scaffold with Zn/Mg Doped Bioactive Ceramic Glass Using Response Surface Method (RSM) [Volume 8, Issue 1, 2024, Pages 36-50]
D
Dabir, Bahram Modeling of asphaltene particle size distribution in well using DEM-CFD [Volume 4, Issue 2, 2020, Pages 69-82]
Daei Moghaddam, Mojtaba Simulation and Optimization of Demercaptanization of Propane and Butane in South Pars Gas Refineries [Volume 3, Issue 2, 2019, Pages 3-14]
Daneshkhah, Vahid Real-time Drilling Event Detection Based on Mud-logging data Using Long Short Term Memory Neural Networks [Volume 8, Issue 1, 2024, Pages 26-35]
Darash, Esmaeil Experimental study of temperature and permeability effect on polymer flooding [Volume 6, Issue 3, 2022, Pages 19-28]
Darvish, Maryam Fixedâbed column studies of nitrate ion adsorption using modified montmorillonite adsorbent [Volume 4, Issue 4, 2021, Pages 89-105]
Dastjani-Farahani, Raziyeh Rheological properties evaluation of hydrogels based on xanthan polymer in the presence of nanoparticles [Volume 7, Issue 3, 2023, Pages 67-76]
Dehestani, Maryam Study on Stability of Laponite Nanoparticles Suspensions in Electrolyte Media [Volume 1, Issue 2, 2018, Pages 25-37]
Delavari, Hamid Effect of In-Situ Synthesized Cerium Oxide Nanoparticles on Oil Recovery Factor In a Glass Micromodel [Volume 6, Issue 2, 2022, Pages 3-14]
Didehban Afshord, Khadijeh Assessingthe crosslinking behavior of nanocomposites based on epoxy and starch-modified graphene oxide nanosheets potent to be applied as engineering coatings [Volume 1, Issue 1, 2017, Pages 61-70]
E
Ebadi Amooghin, Abtin Preparation of mixed matrix membranes containing nickel iron oxide nanoparticles for separation of carbon dioxide, nitrogen and methane [Volume 4, Issue 1, 2020, Pages 90-67]
Ebadi-Dehaghani, Hassan Fabrication of nanocomposite membrane based on polyether block amide/polyvinyl alcohol filled with magnesium oxide nanoparticles in order to investigate selective permeability properties [Volume 7, Issue 1, 2023, Pages 73-85]
Ebrahimduost, Parisa Experimental investigating the effect of adding of graphene on the improvement of convective heat transfer coefficient of water/ethylene glycol system in laminar flow [Volume 2, Issue 3, 2019, Pages 3-19]
Ebrahimi, Navid Design and optimization of metformin released from ZnO/Chitosan nanocomposite [Volume 4, Issue 3, 2020, Pages 42-27]
Ebrahimi, Sanaz Fabrication of nanocomposite membrane based on polyether block amide/polyvinyl alcohol filled with magnesium oxide nanoparticles in order to investigate selective permeability properties [Volume 7, Issue 1, 2023, Pages 73-85]
Ebrahimi-Hosseinzadeh, Bahman Optimization of PVA/Nano-Bentonite Nanofiber Composite Production for Improving Mechanical and Thermal Properties [Volume 2, Issue 2, 2018, Pages 17-28]
Ebrahimi Rad, Fatemeh Investigating of Treated Natural Zeolite as a Catalyst Support for Propane Oxidative Dehydrogenation Process [Volume 6, Issue 2, 2022, Pages 15-26]
Ebrahimi Yazdanabdad, Tahereh Use of functionalized superparamagnetic nanoparticles with Thiourea as heterogeneous catalysts in Petasis-Borono Mannich reaction [Volume 6, Issue 1, 2022, Pages 77-89]
Eghbal Ahmadi, Mohammad Hosein Prediction of conversion and products yields in steam reforming of methanol over Cu-Zn/ZrO2 catalyst using Artificial Intelligence methods [Volume 6, Issue 3, 2022, Pages 41-59]
Eghbal Ahmadi, Mohammad Hosein A 2-Dim CFD model development for petroleum coke calcination process in rotary kiln [Volume 6, Issue 4, 2022, Pages 57-68]
Eghdamtalab, Muhammad Investigation of effective parameters on synthesis of Goethite with solution oxidation method in the laboratory scale [Volume 6, Issue 4, 2022]
Elyasi Kojabad, Mahdi Molecular simulation of phenol-containing poly(ether-block-amide) membrane for carbon dioxide separation from nitrogen [Volume 8, Issue 2, 2024, Pages 24-33]
Emadzadeh, Daryoush Fabrication of nanocomposite membrane based on polysulfone and modified Titanium oxide nanoparticles and its performance in industrial wastewater treatment using osmotic membrane bioreactor process [Volume 6, Issue 3, 2022, Pages 61-73]
Emami Meibodi, Majid Kinetic study of xylene isomerization reaction with Mo-Pt @ZSM5 catalyst [Volume 6, Issue 4, 2022, Pages 43-56]
Emrani, S. Mahdieh The Effect of JP4 on Friction between NBR and Aluminum in Different Roughness [Volume 2, Issue 1, 2018, Pages 19-29]
Emtyazjoo, Mozhgan Use of functionalized superparamagnetic nanoparticles with Thiourea as heterogeneous catalysts in Petasis-Borono Mannich reaction [Volume 6, Issue 1, 2022, Pages 77-89]
Enayati, Mohammad hossein Synthesis and characterizations of polyvinyl alcohol-graphite electrospun nanofibers [Volume 4, Issue 4, 2021, Pages 77-88]
Esapur, Ali Chemorheological Investigation on The Effect of Three Polymerization Retardants on Hydroxyl Terminated Poly butadiene-based Polyurethane-Forming Rate [Volume 7, Issue 1, 2023, Pages 17-31]
Esfandiari, Nadia Experimental Study of Polyvinyl Acetate / Diamond Nanocomposites [Volume 4, Issue 1, 2020, Pages 118-109]
Esfandyari, Morteza Voltage control of Two-chamber microbial fuel using classical PI and MPC controller [Volume 3, Issue 2, 2019, Pages 43-53]
Esfandyari, Morteza Removal of heavy metal zinc from aqueous solution by the alga Gracilaria corticata [Volume 4, Issue 1, 2020, Pages 51-43]
Esfandyari, Morteza Modeling of a synthesis gas production reactor using Aspen plus [Volume 5, Issue 2, 2021, Pages 3-15]
Eslami, Fatemeh Statistical Modeling and Optimization of the Effective Parameters in Precipitation of Asphaltene from Vacuum Residue by Industrial Solvents [Volume 4, Issue 4, 2021, Pages 3-21]
Esmaeelzadeh, Zahra Measuring the porosity of PA6 nanofibers prepared via hybrid electrospinning after the dissolution of PVA component and effect of some parameters on it [Volume 4, Issue 2, 2020, Pages 95-106]
Esmaeili-Faraj, Seyyed Hamid Simulation and Optimization of Demercaptanization of Propane and Butane in South Pars Gas Refineries [Volume 3, Issue 2, 2019, Pages 3-14]
Esmaeili-Faraj, Seyyed Hamid Kinetic study of xylene isomerization reaction with Mo-Pt @ZSM5 catalyst [Volume 6, Issue 4, 2022, Pages 43-56]
Esmaeili-Faraj, Seyyed Hamid Process Design and Economic Analysis of Power Generation from Flare Gases of South Pars Gas Refinery (phase 22-24) [Volume 7, Issue 4, 2023, Pages 95-107]
Esmaeilpour, Mohsen EDTA-functionalized Fe3O4@SiO2 magnetic nanoadsorbent for divalent cadmium removal from aqueous solutions [Volume 5, Issue 3, 2021, Pages 95-106]
Esmaeilpour, Mohsen Silica nanoparticles extracted from rice husk and functionalized with dendrimer as an effective recyclable adsorbent to remove divalent cadmium from aqueous solutions [Volume 6, Issue 1, 2022, Pages 63-76]
Esmaeilpour, Mohsen Removal of copper and chromium ions from aqueous solutions with magnetic nanoparticles functionalized with N-phosphonomethyl amino diacetic acid [Volume 7, Issue 1, 2023, Pages 33-46]
Esmaeilpour, Mohsen Removal of Lead Metal Ion from Aqueous Solution with Fe3O4@SiO2 Core-Shell Magnetic Nanoadsorbent Functionalized with Polyvinyl Alcohol [Volume 8, Issue 1, 2024, Pages 12-25]
Esmaeilpour, Mohsen Application of Fe3O4@SiO2 nanoparticles functionalized with glucosamine molecules as an adsorbent in removing cadmium ion [Volume 8, Issue 3, 2024, Pages 29-39]
Esmizadeh, Elnaz Effect of carbon black on morphological and mechanical properties of rubber foams produced by a single-step
method [Volume 1, Issue 1, 2017, Pages 49-60]
Etesami, Nasrin A comprehensive review on the application of nanoparticles in the matrix of phase change materials to improve thermal properties for energy management and storage [Volume 7, Issue 4, 2023, Pages 63-93]
F
Faghihi, Morteza EDTA-functionalized Fe3O4@SiO2 magnetic nanoadsorbent for divalent cadmium removal from aqueous solutions [Volume 5, Issue 3, 2021, Pages 95-106]
Faghihi, Morteza Silica nanoparticles extracted from rice husk and functionalized with dendrimer as an effective recyclable adsorbent to remove divalent cadmium from aqueous solutions [Volume 6, Issue 1, 2022, Pages 63-76]
Fallah Ramezani, Saeed Substrate concentration control in a bio-reactor for bio-hydrogen production via feedback linearization [Volume 5, Issue 4, 2021, Pages 91-103]
Farah vashi, Maryam Modeling of a synthesis gas production reactor using Aspen plus [Volume 5, Issue 2, 2021, Pages 3-15]
Faramarzi, Mehdi Fabrication of nanocomposite membrane based on polysulfone and modified Titanium oxide nanoparticles and its performance in industrial wastewater treatment using osmotic membrane bioreactor process [Volume 6, Issue 3, 2022, Pages 61-73]
Farashiani, Jamal Real-time Drilling Event Detection Based on Mud-logging data Using Long Short Term Memory Neural Networks [Volume 8, Issue 1, 2024, Pages 26-35]
Farhadian, Omidvar Antimicrobial properties of chitosan composite with activated bentonite against Aquaculture pathogenic bacteria: Aeromonas hydrophila [Volume 2, Issue 4, 2019, Pages 75-87]
Farshadfar, Hamidreza Experimental Study of the Effect of Microwave and Ultrasonic Waves on the Upgrading and Asphaltene Content of Heavy Crude Oil [Volume 7, Issue 4, 2023, Pages 3-14]
Fazaelizadeh, Mohammad Temperature Changes in Oil Wells and Its Effect on Tubulars Stress Condition [Volume 5, Issue 3, 2021, Pages 12-3]
Feizi, Vafa Modeling of Carbon Dioxide Replacement in Methane Hydrate Structure [Volume 4, Issue 1, 2020, Pages 42-31]
Fereydoon Yaripour, Fereydoon x Sonochemical synthesis of HZSM-5 nanocatalyst with improved physiochemical properties [Volume 2, Issue 4, 2019, Pages 33-52]
Forghaniha, Ali Use of functionalized superparamagnetic nanoparticles with Thiourea as heterogeneous catalysts in Petasis-Borono Mannich reaction [Volume 6, Issue 1, 2022, Pages 77-89]
Foroozan, Ali The Effects of Cooling Method on Final Mechanical and Thermal Properties of Polyethylene Tanks Manufactured by Rotational Molding [Volume 4, Issue 4, 2021, Pages 23-31]
Foruzanfar, Roushanak Study on Stability of Laponite Nanoparticles Suspensions in Electrolyte Media [Volume 1, Issue 2, 2018, Pages 25-37]
G
Gandomkar, Asghar The experimental study of the effect of polyacrylamide nanocomposite on reservoir rock and fluid properties in presence of formation water [Volume 3, Issue 2, 2019, Pages 29-41]
Ghader, Sattar Experimental study of Crude Oil demulsification by Demulsifier and process modeling by modification of Collision Frequency Function in Population Balance Equation [Volume 1, Issue 2, 2018, Pages 67-80]
Ghadiri-Ghalenazeri, Saeed Bioactive rod-like nanoparticles as novel filler for improving the properties of supramolecular polyester: synthesis and application [Volume 5, Issue 3, 2021, Pages 57-69]
Ghaedi, Abdol Mohammad Fabrication of nanocomposite membrane based on polysulfone and modified Titanium oxide nanoparticles and its performance in industrial wastewater treatment using osmotic membrane bioreactor process [Volume 6, Issue 3, 2022, Pages 61-73]
Ghaee, Azadeh Improved antifouling properties of Polyether sulfone membrane by Pluronic F-127 additive for hemodialysis application [Volume 1, Issue 1, 2017, Pages 17-30]
Ghafarinia, Vahid Effect of Graphite Source on Pore Structure and CO2 Adsorption of Graphene Aerogel [Volume 7, Issue 3, 2023, Pages 19-28]
Ghahramanafshar, Majid EDTA-functionalized Fe3O4@SiO2 magnetic nanoadsorbent for divalent cadmium removal from aqueous solutions [Volume 5, Issue 3, 2021, Pages 95-106]
Ghahramanafshar, Majid Silica nanoparticles extracted from rice husk and functionalized with dendrimer as an effective recyclable adsorbent to remove divalent cadmium from aqueous solutions [Volume 6, Issue 1, 2022, Pages 63-76]
Ghahraman Afshar, Majid Removal of copper and chromium ions from aqueous solutions with magnetic nanoparticles functionalized with N-phosphonomethyl amino diacetic acid [Volume 7, Issue 1, 2023, Pages 33-46]
Ghahraman Afshar, Majid Fe3O4@SiO2 magnetic core-shell nanoparticles functionalized with 1,4-dihydroxyanthraquinone as an effective and recyclable adsorbent for the removal of divalent cadmium from aqueous solutions [Volume 7, Issue 3, 2023, Pages 3-17]
Ghahraman Afshar, Majid Removal of Lead Metal Ion from Aqueous Solution with Fe3O4@SiO2 Core-Shell Magnetic Nanoadsorbent Functionalized with Polyvinyl Alcohol [Volume 8, Issue 1, 2024, Pages 12-25]
Ghahraman Afshar, Majid Application of Fe3O4@SiO2 nanoparticles functionalized with glucosamine molecules as an adsorbent in removing cadmium ion [Volume 8, Issue 3, 2024, Pages 29-39]
Ghahraman Afshar, Majid Removal of nickel ions from aqueous solutions using theophylline-functionalized Fe3O4@SiO2 magnetic nanoparticles [Volume 8, Issue 3, 2024, Pages 40-49]
Ghahramani, Maral Investigation of the Effect of Poly(vinyl chloride)-g-Poly(butyl acrylate) Brush Copolymer as Plasticizer on the Performance of the Poly(vinyl chloride) Films [Volume 8, Issue 4, 2025, Pages 1-11]
Ghahremannezhad, Faeze Direct modification of polyethylene surfaces using non-equilibrium gliding arc plasma with air at atmospheric pressure [Volume 7, Issue 4, 2023, Pages 15-32]
Ghahremanzadeh, Ramin Removal of copper and chromium ions from aqueous solutions with magnetic nanoparticles functionalized with N-phosphonomethyl amino diacetic acid [Volume 7, Issue 1, 2023, Pages 33-46]
Ghane, Mohammad Javad Modeling of Kavian Petrochemical Hydrogen Purification Industrial Unit by Pressure Swing Adsorption Process [Volume 8, Issue 3, 2024, Pages 50-58]
Ghane, Sara Investigation of Lignin-based activated carbon synthesis parameters on its structural properties [Volume 5, Issue 3, 2021, Pages 71-81]
Gharehdashli, abdolnaser Investigation the photo-degradation of low-density polyethylene containing pro-oxidant and photo-catalyst [Volume 6, Issue 3, 2022, Pages 3-18]
Gharibshahi, reza Feasibility Study and Microscopic Investigation of the Mechanism of Enhanced Oil Recovery Process Using Injection of Clay Nanoparticles into the Glass Micromodel [Volume 2, Issue 2, 2018, Pages 41-56]
Gharibshahi, Reza Effect of In-Situ Synthesized Cerium Oxide Nanoparticles on Oil Recovery Factor In a Glass Micromodel [Volume 6, Issue 2, 2022, Pages 3-14]
Gharibshahi, Reza Experimental Study of the Effect of Microwave and Ultrasonic Waves on the Upgrading and Asphaltene Content of Heavy Crude Oil [Volume 7, Issue 4, 2023, Pages 3-14]
Ghasemi, Ismaeil Investigation of the TPS Effect on the Biodegradability of Agricultural Mulches Based on PLA and LDPE [Volume 4, Issue 2, 2020, Pages 3-18]
Ghasemirad, Somayeh Preparation and Improvement of Shear Strength of a Water-Redispersible Waterborne Acrylic Adhesive for Making Cellulose Joints [Volume 3, Issue 1, 2019, Pages 47-57]
Ghasemirad, Somayeh Evaluation of Tack and Shear Strength of Pressure-Sensitive Adhesives Comprised of Polyurethane and Acrylic Copolymer Blend [Volume 5, Issue 4, 2021, Pages 55-67]
Ghashghaie, Fatemeh Preparation of Poly(dimethylsiloxane) Microparticles via a Co-flow Microfluidic Device and Investigation of Various Parameters Effect on Morphology [Volume 4, Issue 3, 2020, Pages 26-15]
Ghavami, Abolfazl Performance evaluation of Pebax/ deep eutectic solvent supported liquid membrane in carbon dioxide separation [Volume 8, Issue 2, 2024, Pages 13-23]
Ghayoumi, Mansour Effect of carbon black on morphological and mechanical properties of rubber foams produced by a single-step
method [Volume 1, Issue 1, 2017, Pages 49-60]
Ghazavi, Roghayeh The degree of conformity of research subjects in the chemical engineering in Shahid Chamran University with Iran and the world [Volume 7, Issue 4, 2023, Pages 33-45]
GhaziTabatabaei, Zohreh Investigation of influence of the Styrene Butadiene Styrene on the properties of the Expandable Poly Styrene and simulation of its laboratory data via Artificial Neural Networks [Volume 5, Issue 2, 2021, Pages 105-116]
Ghiyami, Taha Study of the effect of operating parameters on the performance of acetylene hydrogenation reactors [Volume 5, Issue 2, 2021, Pages 91-104]
Gholizadeh, ٍEbrahim Rheology and Chemorheology Behavior of Alumina/Polysaccharide Suspensions in Ceramic Membranes Production [Volume 8, Issue 1, 2024, Pages 51-57]
Gholizadeh-Ghale-Aziz, Moheyddin Synthesis and investigation of low band gap energy donor-acceptor polyaniline [Volume 5, Issue 3, 2021, Pages 39-55]
Ghorani, Behrouz Application of Molecularly Imprinted Film for Extraction of Herbicide Mecoprop from Aqueous Sample [Volume 2, Issue 3, 2019, Pages 77-89]
Ghorbani, Mohsen Investigation of performance of Pebax/ Poly(vinyl alcohol) blend membrane for carbon dioxide separation from nitrogen [Volume 3, Issue 4, 2020, Pages 57-71]
Ghoreishy, Mir hamidreza Mechanical properties improvements of O-rings manufacturing for hydraulic systems on the basis of acrylonitrile butadiene rubber through using nanoclays [Volume 1, Issue 1, 2017, Pages 39-48]
Golshan Ebrahimi, Nadereh Optimization of ternary blends based on poly (lactic acid) according to physical and biological properties [Volume 4, Issue 1, 2020, Pages 66-53]
Golshan Ebrahimi, Nadereh Comparison of rheological behavior of LDPE in linear and nonlinear viscoelastic flow and using Multimode Pom-Pom model for prediction of uniaxial elongational flow [Volume 4, Issue 4, 2021, Pages 49-56]
Goodarzi, Mohsen Removal of lead ions from aqueous solutions by adsorption operation: A review [Volume 3, Issue 1, 2019, Pages 3-28]
Goodarzi, Vahabodin Fabrication of nanocomposite scaffold based on bacterial cellulose/zinc oxide nanoparticles/polypyrrole with antibacterial and cytotoxicity assessment [Volume 5, Issue 2, 2021, Pages 37-50]
Goudarzi, Jafar Statistical modeling and optimization of low-temperature oxidation dehydrogenation of propane process using manganese catalyst based on CuBTC organic metal framework [Volume 6, Issue 1, 2022, Pages 15-32]
H
Habibi, Negar Synthesis and properties of super hydrophobic silica aerogel/basalt fibers blanket by ambient drying method [Volume 1, Issue 1, 2017, Pages 31-38]
Haghgoo, Majid A comprehensive review on the application of nanoparticles in the matrix of phase change materials to improve thermal properties for energy management and storage [Volume 7, Issue 4, 2023, Pages 63-93]
Haji Bagherian, Mehdi Preparation and study of physical and mechanical behavior of polylactic acid bionanocomposites reinforced with Cellulose Nanocrystal and silver nanoparticles [Volume 5, Issue 3, 2021, Pages 25-13]
Haji Bagherian, Mehdi Investigating mechanical, electrical and morphological properties of polycarbonate/polyacrylonitrile-butadiene-styrene/nanographene nanocomposites [Volume 7, Issue 1, 2023, Pages 61-72]
Hajipour, Mastaneh Impact of Aqueous Phase Ion Type and Concentration on Calcite Surface Wettability and Acidic Oil-Brine IFT [Volume 4, Issue 2, 2020, Pages 19-34]
Hakim, Shokoufeh The Effect of Magnesium Particles Size and Reaction Conditions on Morphology of the Synthesized Magnesium Ethoxide [Volume 4, Issue 3, 2020, Pages 111-97]
Hamidian, Hooshang Study on Stability of Laponite Nanoparticles Suspensions in Electrolyte Media [Volume 1, Issue 2, 2018, Pages 25-37]
Hanifehei, Marjan Modeling Viscosity of Ionic Liquids and Akanolamines Mixtures Using Peng-Robinson and Soave-Redlich-Kwong Equation of States with Friction Theory [Volume 5, Issue 4, 2021, Pages 39-54]
Hashemian, Saeedeh Control of flooding phenomena in vacuum distillation tray column using operational and laboratory parameters [Volume 5, Issue 2, 2021, Pages 51-63]
Hassanzadeh Nemati, Nahid Fabrication of nanocomposite scaffold based on bacterial cellulose/zinc oxide nanoparticles/polypyrrole with antibacterial and cytotoxicity assessment [Volume 5, Issue 2, 2021, Pages 37-50]
Hatamian-Zarmi, Ashrafalsadat Optimization of PVA/Nano-Bentonite Nanofiber Composite Production for Improving Mechanical and Thermal Properties [Volume 2, Issue 2, 2018, Pages 17-28]
Hatamian-Zarmi, Ashrafalsadat Investigation of the Structural Properties of Dopamine-Loaded Poly(butyl cyanoacrylate) Nanosystem [Volume 3, Issue 4, 2020, Pages 73-83]
Hayatolgheibi, Hosein Simulation of Hydrogel Injection in Micro-Model and Prediction of Oil Recovery Factor [Volume 5, Issue 4, 2021, Pages 3-13]
Hedayati Moghaddam, Amin Investigation of Optimum Condition of Saponin Extraction by Carbon Dioxide Super Critical Fluid and Solvent [Volume 4, Issue 4, 2021, Pages 67-76]
Hemmati, Azadeh Design, fabrication and characterization of electrospun wound dressing composed of polyvinyl alcohol/Aloe Vera [Volume 4, Issue 2, 2020, Pages 83-93]
Hemmati, Mahmood Study on adsorption behavior of dilute polymeric systems based on sulfonated polyacrylamide for improving oil recovery application [Volume 1, Issue 1, 2017, Pages 5-16]
Heshmati, Farzaneh Zeynab Improving the performance of graphite-based solar water desalination system by using plasmonic nickel nanoparticles and engineering the structure [Volume 6, Issue 3, 2022, Pages 75-85]
Heydari, Sharif Fabrication of nanocomposite scaffold based on bacterial cellulose/zinc oxide nanoparticles/polypyrrole with antibacterial and cytotoxicity assessment [Volume 5, Issue 2, 2021, Pages 37-50]
Heydari Orojlou, Shahin Photocatalytic Removal of Metribuzin Using Titanium Dioxide/Silver Nanocomposite [Volume 6, Issue 2, 2022, Pages 81-95]
Hosseini, Mir Ghasem Synthesis and investigation of low band gap energy donor-acceptor polyaniline [Volume 5, Issue 3, 2021, Pages 39-55]
Hosseini, Seyed Ghorban Investigation of effective parameters on synthesis of Goethite with solution oxidation method in the laboratory scale [Volume 6, Issue 4, 2022]
Hosseini, Seyed Saeid Investigation the performance of Polysulfone/Neodymium Magnetic Mixed-Matrix Membranes for O2/N2 Separation [Volume 4, Issue 2, 2020, Pages 53-68]
Hosseini Anari, Hadi Numerical-parametrical analysis on the hydrogen peroxide catalyst bed for space monopropellant thruster applications [Volume 1, Issue 2, 2018, Pages 15-24]
I
Ilkhani, Ali Reza Control of flooding phenomena in vacuum distillation tray column using operational and laboratory parameters [Volume 5, Issue 2, 2021, Pages 51-63]
J
Jafari, Arezoo Experimental Investigation and Modeling of AOT Surfactant Adsorption on Carbonate Rock Particles [Volume 3, Issue 3, 2019, Pages 39-50]
Jafari, Arezou A Comparison Between Performance of Produced Biosurfactant and Conventional Chemical Surfactants in Enhanced Heavy Oil Recovery [Volume 3, Issue 1, 2019, Pages 69-80]
Jafari, Arezou Effect of In-Situ Synthesized Cerium Oxide Nanoparticles on Oil Recovery Factor In a Glass Micromodel [Volume 6, Issue 2, 2022, Pages 3-14]
Jafari, Arezou Experimental study of temperature and permeability effect on polymer flooding [Volume 6, Issue 3, 2022, Pages 19-28]
Jafari, Arezou Experimental investigation of Fe3O4 and Activated Carbon effect on the and heavy oil upgrading process by Electromagnetic heating [Volume 7, Issue 1, 2023, Pages 3-15]
Jafari, Arezou Optimum allocation of carbon dioxide and nitrogen gas between wells of an oil field in the artificial gas lift process [Volume 7, Issue 2, 2023, Pages 59-71]
Jafari, Arezou Rheological properties evaluation of hydrogels based on xanthan polymer in the presence of nanoparticles [Volume 7, Issue 3, 2023, Pages 67-76]
Jafari, Arezou Experimental Study of the Effect of Microwave and Ultrasonic Waves on the Upgrading and Asphaltene Content of Heavy Crude Oil [Volume 7, Issue 4, 2023, Pages 3-14]
Jafari, Arezou Effect of Operating Parameters on the Injection of Carbon Dioxide and Sour Gas as Cushion Gas in the Process of Underground Hydrogen Gas Storage [Volume 8, Issue 1, 2024, Pages 3-11]
Jafari, Arezou Underground Hydrogen Storage in the Presence of Cushion Gas: Investigation of Cushion Gas Properties, Reservoir, and Operational Parameters [Volume 8, Issue 2, 2024, Pages 43-63]
Jafari, dariush Modeling of a synthesis gas production reactor using Aspen plus [Volume 5, Issue 2, 2021, Pages 3-15]
Jafari, Mostafa Simulation and Techno-Economic analysis of Hydrotreating Process of Mazut [Volume 5, Issue 1, 2021, Pages 17-30]
Jafari, Seyed Hassan Influence of swelling phenomenon on filler structure in nitrile-silica nanocomposite as resistant rubber compound to solvent [Volume 1, Issue 2, 2018, Pages 51-66]
Jalali tarshizi, Hossein Water Uptake Improvement in Hygiene Papers by NanoHydrogel Prepared from Chitosan/Nano silver/ PolyAcrylic Acid Composite [Volume 3, Issue 3, 2019, Pages 51-60]
Jalali tarshizi, Hossein Cationic PolyAcrylamide/Cellulose Nanofibril Polyelectrolytes Effect on Suspension and Network Properties of Packaging Recycled fibers [Volume 5, Issue 1, 2021, Pages 3-15]
Jalili, Kiyumars Preparation of Poly(dimethylsiloxane) Microparticles via a Co-flow Microfluidic Device and Investigation of Various Parameters Effect on Morphology [Volume 4, Issue 3, 2020, Pages 26-15]
Javadi, Ali Removal of nickel ions from aqueous solutions using theophylline-functionalized Fe3O4@SiO2 magnetic nanoparticles [Volume 8, Issue 3, 2024, Pages 40-49]
Javanmard, Neda The experimental study of the effect of polyacrylamide nanocomposite on reservoir rock and fluid properties in presence of formation water [Volume 3, Issue 2, 2019, Pages 29-41]
K
Kalaee, Mohammadreza Optimization of anti- Corrosion of Epoxy/Zinc Phosphate and Nano Silica coating [Volume 4, Issue 2, 2020, Pages 35-51]
Kalantari, Saeed Preparation of mixed matrix membranes containing nickel iron oxide nanoparticles for separation of carbon dioxide, nitrogen and methane [Volume 4, Issue 1, 2020, Pages 90-67]
KALANTARI, BAHAREH Investigation on microstructure, morphology, and tensile properties of polypropylene/graphene nanoplatelets nanocomposite fiber in the presence of compatibilizer [Volume 4, Issue 1, 2020, Pages 30-13]
Karami, Amir Fuzzy Control of Semibatch Poly(ethylene terephthalate) Reactor Temperature based on Linguistic Rules [Volume 4, Issue 3, 2020, Pages 68-57]
Karami, Hamid The role of hierarchical Y zeolites on the catalyst performance of diesel Hydrodesulfurization Process [Volume 5, Issue 3, 2021, Pages 37-27]
Karami, Hamid Evaluation of propane dehydrogenation catalysts: catalyst development, chemistry, and challenges [Volume 7, Issue 2, 2023, Pages 17-37]
Karbassi, Abdolreza Fixedâbed column studies of nitrate ion adsorption using modified montmorillonite adsorbent [Volume 4, Issue 4, 2021, Pages 89-105]
Karchoubi, Fatemeh A review on Nanocomposite Hydrogels: Rheology, Morphology, and Applications [Volume 3, Issue 3, 2019, Pages 3-38]
Karimdoost Yasuri, Amir Modeling the Application of Steam Produced by a Boiler-based Waste Incinerator to Disable Catalyst in the Production of Linear Polyethylene (LLDPE) in Lorestan Petrochemical Complex [Volume 3, Issue 1, 2019, Pages 81-92]
Karimi-Sabet, Javad Investigation the performance of Polysulfone/Neodymium Magnetic Mixed-Matrix Membranes for O2/N2 Separation [Volume 4, Issue 2, 2020, Pages 53-68]
Karimzadeh, ramin Effect of Size of tire parts and Mazut Addition on Simultaneous Pyrolysis of Used Tire and Mazut [Volume 3, Issue 4, 2020, Pages 13-24]
Karimzadeh, ramin Experimental investigation of Fe3O4 and Activated Carbon effect on the and heavy oil upgrading process by Electromagnetic heating [Volume 7, Issue 1, 2023, Pages 3-15]
Karimzadeh, Ramin Statistical Modeling and Optimization of the Effective Parameters in Precipitation of Asphaltene from Vacuum Residue by Industrial Solvents [Volume 4, Issue 4, 2021, Pages 3-21]
KArimzadeh, ramin Investigation of Lignin-based activated carbon synthesis parameters on its structural properties [Volume 5, Issue 3, 2021, Pages 71-81]
Kaykha, Yasin Investigating the Effect of DBTDL Catalyst on Curing Kinetic of Polyurethane using Differential Scanning Calorimetry: HTPB/TDI vs. HTPB/IPDI [Volume 5, Issue 1, 2021, Pages 43-55]
Kazemeini, Mohammad The role of hierarchical Y zeolites on the catalyst performance of diesel Hydrodesulfurization Process [Volume 5, Issue 3, 2021, Pages 37-27]
Kazemi, Monire Kinetic study of xylene isomerization reaction with Mo-Pt @ZSM5 catalyst [Volume 6, Issue 4, 2022, Pages 43-56]
Kazemnejadi, Milad Removal of Lead Metal Ion from Aqueous Solution with Fe3O4@SiO2 Core-Shell Magnetic Nanoadsorbent Functionalized with Polyvinyl Alcohol [Volume 8, Issue 1, 2024, Pages 12-25]
Kazemnejadi, Milad Application of Fe3O4@SiO2 nanoparticles functionalized with glucosamine molecules as an adsorbent in removing cadmium ion [Volume 8, Issue 3, 2024, Pages 29-39]
Kebritchi, Abbas Investigation the effect of NCO/OH ratio, amount and type of curing catayst on the Pot life of HTPB based binder system [Volume 2, Issue 3, 2019, Pages 65-76]
Kebritchi, Abbas Effect of Curing Agent, Temperature, and Catalyst on Physical-Mechanical Properties of HTPB-Based Highly-filled Composite [Volume 3, Issue 4, 2020, Pages 25-42]
Kebritchi, Abbas Investigating the Effect of DBTDL Catalyst on Curing Kinetic of Polyurethane using Differential Scanning Calorimetry: HTPB/TDI vs. HTPB/IPDI [Volume 5, Issue 1, 2021, Pages 43-55]
Kebritchi, Abbas Poly (Vinyl Ferrocene)/Hydroxyl terminated polybutadiene (PVF/HTPB) blend as a Catalyst: Preparation, Characterization and Comparison [Volume 5, Issue 4, 2021, Pages 79-90]
Kebritchi, Abbas Chemorheological Investigation on The Effect of Three Polymerization Retardants on Hydroxyl Terminated Poly butadiene-based Polyurethane-Forming Rate [Volume 7, Issue 1, 2023, Pages 17-31]
Keshavarz Moraveji, Mostafa Experimental study of temperature and permeability effect on polymer flooding [Volume 6, Issue 3, 2022, Pages 19-28]
Keshtkar, Ali reza Fixedâbed column studies of U(VI) biosorption using Pseudomonas putida â Chitosan hybrid biosorbent [Volume 3, Issue 2, 2019, Pages 68-81]
Khabiri, Mohammad Influence of swelling phenomenon on filler structure in nitrile-silica nanocomposite as resistant rubber compound to solvent [Volume 1, Issue 2, 2018, Pages 51-66]
Khademian, Einallah Removal of lead ions from aqueous solutions by adsorption operation: A review [Volume 3, Issue 1, 2019, Pages 3-28]
Khademizadeh, shahnaz The degree of conformity of research subjects in the chemical engineering in Shahid Chamran University with Iran and the world [Volume 7, Issue 4, 2023, Pages 33-45]
Khaksar Manshad, Abbas Concentration-Behavioral, Adsorption, Flooding, Relative Permeability Studies of Polymer Nanocomposite in Two Reservoir Lithologies [Volume 5, Issue 1, 2021, Pages 69-86]
Khalili-Garakani, Amirhossein Simulation and Techno-Economic analysis of Hydrotreating Process of Mazut [Volume 5, Issue 1, 2021, Pages 17-30]
Khani, Mohammad Reza Direct modification of polyethylene surfaces using non-equilibrium gliding arc plasma with air at atmospheric pressure [Volume 7, Issue 4, 2023, Pages 15-32]
Khanjani, Jaber Direct modification of polyethylene surfaces using non-equilibrium gliding arc plasma with air at atmospheric pressure [Volume 7, Issue 4, 2023, Pages 15-32]
Khazaei, Roghayeh Exploring the performance of a composite membrane with a nanometer-thin selective layer of chitosan-gallic acid for the separation of carbon dioxide [Volume 7, Issue 4, 2023, Pages 47-61]
Kheirtalab, Mina Effect of MIL-53 metal organic frameworks on performance of Pebax/PEG mixed matrix membrane for CO2/CH4 separation [Volume 3, Issue 3, 2019, Pages 69-79]
Kheirtalab, Mina Investigation of performance of Pebax/ Poly(vinyl alcohol) blend membrane for carbon dioxide separation from nitrogen [Volume 3, Issue 4, 2020, Pages 57-71]
Khojastehpour, Mehdi Investigation of the TPS Effect on the Biodegradability of Agricultural Mulches Based on PLA and LDPE [Volume 4, Issue 2, 2020, Pages 3-18]
Khonakdar, Hossein Ali Effect of carbon black on morphological and mechanical properties of rubber foams produced by a single-step
method [Volume 1, Issue 1, 2017, Pages 49-60]
Khonakdar, Hossein Ali Influence of swelling phenomenon on filler structure in nitrile-silica nanocomposite as resistant rubber compound to solvent [Volume 1, Issue 2, 2018, Pages 51-66]
Khonsha, Iman Modeling of Kavian Petrochemical Hydrogen Purification Industrial Unit by Pressure Swing Adsorption Process [Volume 8, Issue 3, 2024, Pages 50-58]
Khoozan, Davood Effect of Operating Parameters on the Injection of Carbon Dioxide and Sour Gas as Cushion Gas in the Process of Underground Hydrogen Gas Storage [Volume 8, Issue 1, 2024, Pages 3-11]
Khoozan, Davood Real-time Drilling Event Detection Based on Mud-logging data Using Long Short Term Memory Neural Networks [Volume 8, Issue 1, 2024, Pages 26-35]
Khorasheh, Farhad Photocatalytic Reduction of Carbon dioxide to Renewable Methane using Titanium dioxide modified with Bismuth and Copper [Volume 4, Issue 3, 2020, Pages 55-43]
L
Lakhi, Mohammad Increase Heat Conductivity of Bladder and Calculate its Effect on Temperature Profile of the Tire in the Curing Process [Volume 3, Issue 3, 2019, Pages 93-105]
Larimi, Afsanehsadat Photocatalytic Reduction of Carbon dioxide to Renewable Methane using Titanium dioxide modified with Bismuth and Copper [Volume 4, Issue 3, 2020, Pages 55-43]
Larimi, Afsanehsadat EDTA-functionalized Fe3O4@SiO2 magnetic nanoadsorbent for divalent cadmium removal from aqueous solutions [Volume 5, Issue 3, 2021, Pages 95-106]
Larimi, Afsanehsadat Silica nanoparticles extracted from rice husk and functionalized with dendrimer as an effective recyclable adsorbent to remove divalent cadmium from aqueous solutions [Volume 6, Issue 1, 2022, Pages 63-76]
Layeghi, Azam Fe3O4@SiO2 magnetic core-shell nanoparticles functionalized with 1,4-dihydroxyanthraquinone as an effective and recyclable adsorbent for the removal of divalent cadmium from aqueous solutions [Volume 7, Issue 3, 2023, Pages 3-17]
Lotfi, Marzieh Fabrication of PVA/Gr/TiO2 adsorbent and study of its application in removal of malachite green [Volume 3, Issue 1, 2019, Pages 59-68]
M
Mahdizadeh, Soheila Optimization of PVA/Nano-Bentonite Nanofiber Composite Production for Improving Mechanical and Thermal Properties [Volume 2, Issue 2, 2018, Pages 17-28]
Maleki, Abbas Removal of nickel ions from aqueous solutions using theophylline-functionalized Fe3O4@SiO2 magnetic nanoparticles [Volume 8, Issue 3, 2024, Pages 40-49]
Maleki, Artin Poly (Vinyl Ferrocene)/Hydroxyl terminated polybutadiene (PVF/HTPB) blend as a Catalyst: Preparation, Characterization and Comparison [Volume 5, Issue 4, 2021, Pages 79-90]
Maleki, Mahmoud Potential assessment of non-edible sources for biodiesel production in Iran [Volume 5, Issue 2, 2021, Pages 17-36]
Mansoori, Mehdi Real-time Drilling Event Detection Based on Mud-logging data Using Long Short Term Memory Neural Networks [Volume 8, Issue 1, 2024, Pages 26-35]
Mansouri, Elaheh Application of Molecularly Imprinted Film for Extraction of Herbicide Mecoprop from Aqueous Sample [Volume 2, Issue 3, 2019, Pages 77-89]
Mansourizadeh, Amir Fabrication of nanocomposite membrane based on polysulfone and modified Titanium oxide nanoparticles and its performance in industrial wastewater treatment using osmotic membrane bioreactor process [Volume 6, Issue 3, 2022, Pages 61-73]
Mansourpour, Zahra Improved antifouling properties of Polyether sulfone membrane by Pluronic F-127 additive for hemodialysis application [Volume 1, Issue 1, 2017, Pages 17-30]
Mansourpour, Zahra Modeling of asphaltene particle size distribution in well using DEM-CFD [Volume 4, Issue 2, 2020, Pages 69-82]
Mansour Sharifloo, Mehdi Improved antifouling properties of Polyether sulfone membrane by Pluronic F-127 additive for hemodialysis application [Volume 1, Issue 1, 2017, Pages 17-30]
Manteghian, Mehrdad A Comparison Between Performance of Produced Biosurfactant and Conventional Chemical Surfactants in Enhanced Heavy Oil Recovery [Volume 3, Issue 1, 2019, Pages 69-80]
Manteghian, Mehrdad Determination of nucleation and induction time of crystallization of amoxicillin nanoparticles in the presence of surface active agents [Volume 4, Issue 1, 2020, Pages 12-3]
Mehdi Mirabolghasemi, Seyed Preparation and study of physical and mechanical behavior of polylactic acid bionanocomposites reinforced with Cellulose Nanocrystal and silver nanoparticles [Volume 5, Issue 3, 2021, Pages 25-13]
Mehrabi, Pooyeh Investigation of the Effect of Poly(vinyl chloride)-g-Poly(butyl acrylate) Brush Copolymer as Plasticizer on the Performance of the Poly(vinyl chloride) Films [Volume 8, Issue 4, 2025, Pages 1-11]
Mehralizadeh, Amir Investigation of influence of the Styrene Butadiene Styrene on the properties of the Expandable Poly Styrene and simulation of its laboratory data via Artificial Neural Networks [Volume 5, Issue 2, 2021, Pages 105-116]
Mehrooz, Nafiseh Effect of In-Situ Synthesized Cerium Oxide Nanoparticles on Oil Recovery Factor In a Glass Micromodel [Volume 6, Issue 2, 2022, Pages 3-14]
Mirzababaei, Siamak Optimization of anti- Corrosion of Epoxy/Zinc Phosphate and Nano Silica coating [Volume 4, Issue 2, 2020, Pages 35-51]
M.N.P. Meibody, mohamamd Numerical-parametrical analysis on the hydrogen peroxide catalyst bed for space monopropellant thruster applications [Volume 1, Issue 2, 2018, Pages 15-24]
Mohaddes Mojtahedi, Mohammad Reza Investigation on microstructure, morphology, and tensile properties of polypropylene/graphene nanoplatelets nanocomposite fiber in the presence of compatibilizer [Volume 4, Issue 1, 2020, Pages 30-13]
Mohaddes Mojtahedi, Mohammad Reza Measuring the porosity of PA6 nanofibers prepared via hybrid electrospinning after the dissolution of PVA component and effect of some parameters on it [Volume 4, Issue 2, 2020, Pages 95-106]
Mohajeri, Seyed Ahmad Application of Molecularly Imprinted Film for Extraction of Herbicide Mecoprop from Aqueous Sample [Volume 2, Issue 3, 2019, Pages 77-89]
Mohammadhosseini, Babak Direct modification of polyethylene surfaces using non-equilibrium gliding arc plasma with air at atmospheric pressure [Volume 7, Issue 4, 2023, Pages 15-32]
Mohammadi, Maryam Two-Step Synthesis of PolyCarboxylate Ether by Bulk and Solution Methods [Volume 5, Issue 2, 2021, Pages 79-90]
Mohammadi, Saber Effect of SiO2 nanoparticles on wax formation, morphology, and rheological behavior in crude oil:An experimental study [Volume 6, Issue 1, 2022, Pages 33-48]
Mohammadi, Zahra A comprehensive review on the application of nanoparticles in the matrix of phase change materials to improve thermal properties for energy management and storage [Volume 7, Issue 4, 2023, Pages 63-93]
Mohammadian Semnani, Hamidreza Epoxy Modification by Polyurethane and Its Effects on Abrasion and Adhesion Properties [Volume 5, Issue 3, 2021, Pages 83-94]
Mohammad Taghi Nejad, Hadi Effect of Curing Agent, Temperature, and Catalyst on Physical-Mechanical Properties of HTPB-Based Highly-filled Composite [Volume 3, Issue 4, 2020, Pages 25-42]
Moharrami, Mahmoud Molecular simulation of phenol-containing poly(ether-block-amide) membrane for carbon dioxide separation from nitrogen [Volume 8, Issue 2, 2024, Pages 24-33]
Mohebbi, Vahid Modeling of Carbon Dioxide Replacement in Methane Hydrate Structure [Volume 4, Issue 1, 2020, Pages 42-31]
Mohebifar, AMIN Optimization of mechanical properties of PP-polymer foam fabricated via extruder [Volume 5, Issue 1, 2021, Pages 105-120]
Mohseni Roudbari, Sina Potential assessment of non-edible sources for biodiesel production in Iran [Volume 5, Issue 2, 2021, Pages 17-36]
Mokhtari-Hosseini, Zahra-Beagom Optimization of PVA/Nano-Bentonite Nanofiber Composite Production for Improving Mechanical and Thermal Properties [Volume 2, Issue 2, 2018, Pages 17-28]
Molla-Abbasi, Payam Based Detector a of Development and Design for Composite CNT)/Acid Lactic(Poly on Compounds Organic Volatile of Detecti [Volume 3, Issue 4, 2020, Pages 43-56]
Mombini, Jahanbakhsh Effect of Curing Agent, Temperature, and Catalyst on Physical-Mechanical Properties of HTPB-Based Highly-filled Composite [Volume 3, Issue 4, 2020, Pages 25-42]
Moniri, Elham Design of Magnetic Chitosan nanoparticles for Targeted Cancer Therapy using 5-Fluorouracil in Glycerol-Moonoleate [Volume 2, Issue 1, 2018, Pages 45-56]
Moradi, Mohsen Photocatalytic Reduction of Carbon dioxide to Renewable Methane using Titanium dioxide modified with Bismuth and Copper [Volume 4, Issue 3, 2020, Pages 55-43]
Moradi Dehaghi, Shahram Fixedâbed column studies of nitrate ion adsorption using modified montmorillonite adsorbent [Volume 4, Issue 4, 2021, Pages 89-105]
Mosayebi, Amir Prediction of conversion and products yields in steam reforming of methanol over Cu-Zn/ZrO2 catalyst using Artificial Intelligence methods [Volume 6, Issue 3, 2022, Pages 41-59]
Motamedian, Ehsan Applying a system-oriented method for culture medium design to improve bio-ethanol production by synechocystis [Volume 3, Issue 2, 2019, Pages 55-67]
Motazedian, Esmail Experimental Study of Polyvinyl Acetate / Diamond Nanocomposites [Volume 4, Issue 1, 2020, Pages 118-109]
Mousavi, Seyedeh Neda Utilizing Yarrowia lipolytica supernatant for electric arc furnace dust bioleaching [Volume 7, Issue 2, 2023, Pages 3-16]
Mousavi, Seyed mohammad Sonochemical synthesis of HZSM-5 nanocatalyst with improved physiochemical properties [Volume 2, Issue 4, 2019, Pages 33-52]
Mousavi, Seyed mohammad A Comparison Between Performance of Produced Biosurfactant and Conventional Chemical Surfactants in Enhanced Heavy Oil Recovery [Volume 3, Issue 1, 2019, Pages 69-80]
Mousavi, Seyyed Mohammad Cu biorecovery from electronic wastes without daily pH adjusting using Acidithiobacillus ferrooxidans [Volume 2, Issue 1, 2018, Pages 57-65]
Mousavi, Seyyed Mohammad Utilizing Yarrowia lipolytica supernatant for electric arc furnace dust bioleaching [Volume 7, Issue 2, 2023, Pages 3-16]
Mousavi, Seyyed Mohammad Evaluating the Metabolic Activity of Aspergillus niger for Organic Acid Production Considering the Impact of Small Molecules in Culture Media [Volume 7, Issue 3, 2023, Pages 49-66]
Mousavi, Seyyed Mohammad A Review on Lithium Bioleaching from Solid Resources [Volume 8, Issue 3, 2024, Pages 1-16]
Msoud Sabet, Msoud Investigating mechanical, electrical and morphological properties of polycarbonate/polyacrylonitrile-butadiene-styrene/nanographene nanocomposites [Volume 7, Issue 1, 2023, Pages 61-72]
N
Naderi, Ali Evaluating the Metabolic Activity of Aspergillus niger for Organic Acid Production Considering the Impact of Small Molecules in Culture Media [Volume 7, Issue 3, 2023, Pages 49-66]
Naderi, Ali A Review on Lithium Bioleaching from Solid Resources [Volume 8, Issue 3, 2024, Pages 1-16]
Naderi, Ghasem Mechanical properties improvements of O-rings manufacturing for hydraulic systems on the basis of acrylonitrile butadiene rubber through using nanoclays [Volume 1, Issue 1, 2017, Pages 39-48]
Najafi, Mohsen Preparation and study of physical and mechanical behavior of polylactic acid bionanocomposites reinforced with Cellulose Nanocrystal and silver nanoparticles [Volume 5, Issue 3, 2021, Pages 25-13]
Najafi, Mohsen Toner production by in situ emulsion polymerization: Investigation of the effect of reaction temperature and stirrer speed [Volume 6, Issue 1, 2022, Pages 3-14]
Najafi, Mohsen Investigating mechanical, electrical and morphological properties of polycarbonate/polyacrylonitrile-butadiene-styrene/nanographene nanocomposites [Volume 7, Issue 1, 2023, Pages 61-72]
Najjar, Reza Synthesis and investigation of low band gap energy donor-acceptor polyaniline [Volume 5, Issue 3, 2021, Pages 39-55]
Namdar, Hamed Optimum allocation of carbon dioxide and nitrogen gas between wells of an oil field in the artificial gas lift process [Volume 7, Issue 2, 2023, Pages 59-71]
Namdar, Hamed Effect of Operating Parameters on the Injection of Carbon Dioxide and Sour Gas as Cushion Gas in the Process of Underground Hydrogen Gas Storage [Volume 8, Issue 1, 2024, Pages 3-11]
Namdar, Hamed Underground Hydrogen Storage in the Presence of Cushion Gas: Investigation of Cushion Gas Properties, Reservoir, and Operational Parameters [Volume 8, Issue 2, 2024, Pages 43-63]
Naseh, Hassan Numerical-parametrical analysis on the hydrogen peroxide catalyst bed for space monopropellant thruster applications [Volume 1, Issue 2, 2018, Pages 15-24]
Nasehi, Pedram Cr (VI) Adsorption Using synthesis Novel UIO-66-MnFe2O4-TiO2 Magnetic Nanoparticles by Experimental Design [Volume 4, Issue 4, 2021, Pages 33-48]
Nasiri, Hadi Synthesis and Characterization of CexZr1-xO2 using Supercritical Water [Volume 3, Issue 4, 2020, Pages 3-12]
Nayeri, Fatemeh The experimental study of the effect of polyacrylamide nanocomposite on reservoir rock and fluid properties in presence of formation water [Volume 3, Issue 2, 2019, Pages 29-41]
Nazari, Mosa Investigation the effect of NCO/OH ratio, amount and type of curing catayst on the Pot life of HTPB based binder system [Volume 2, Issue 3, 2019, Pages 65-76]
NEKOOMANESH, MEHDI The Effect of Magnesium Particles Size and Reaction Conditions on Morphology of the Synthesized Magnesium Ethoxide [Volume 4, Issue 3, 2020, Pages 111-97]
Nematollahi, Reza Photocatalytic Reduction of Carbon dioxide to Renewable Methane using Titanium dioxide modified with Bismuth and Copper [Volume 4, Issue 3, 2020, Pages 55-43]
Niroomand, Hamid The effect of reaction parameters in phenol formaldehyde resin synthesis and the evaluation of product properties [Volume 6, Issue 4, 2022, Pages 23-32]
Nori Dogahi, seyedeh Maryam Measurement of Surface and Shallow depth Changes of Polypropylene Due to Gliding Discharge Plasma [Volume 7, Issue 2, 2023, Pages 47-57]
Noroozi, Mina Performance Improvementand Investigation of Heat Transfer in Structurally Graded Silica Aerogels with Pores Diameter Changing [Volume 2, Issue 3, 2019, Pages 41-50]
Noroozi Tisseh, Zeinab Removal of copper and chromium ions from aqueous solutions with magnetic nanoparticles functionalized with N-phosphonomethyl amino diacetic acid [Volume 7, Issue 1, 2023, Pages 33-46]
Nouri Khorasani, Saeid Effect of carbon black on morphological and mechanical properties of rubber foams produced by a single-step
method [Volume 1, Issue 1, 2017, Pages 49-60]
O
Omidkhah, Mohammadreza Preparation of mixed matrix membranes containing nickel iron oxide nanoparticles for separation of carbon dioxide, nitrogen and methane [Volume 4, Issue 1, 2020, Pages 90-67]
Ommi, Fathollah Numerical-parametrical analysis on the hydrogen peroxide catalyst bed for space monopropellant thruster applications [Volume 1, Issue 2, 2018, Pages 15-24]
Ostovari, Abdolamir Study of the rheological and compatibility behavior of sulfonated acrylamide copolymer/ wheat starch blends in aqueous media [Volume 3, Issue 2, 2019, Pages 15-27]
Oveisi, Hamid Synthesis and evaluation of cytotoxicity of hybrid hydrogel based on chitosan and Ph.ZnO@HAP nanocomposite [Volume 2, Issue 4, 2019, Pages 19-31]
Ozeiri, Mozhdeh Effect of hydrophobic modification of scleroglucan on its adsorption behavior onto carbonate rock surface of oil reservoir [Volume 2, Issue 3, 2019, Pages 51-64]
P
Pahlevani, Hossein A review on Nanocomposite Hydrogels: Rheology, Morphology, and Applications [Volume 3, Issue 3, 2019, Pages 3-38]
Panahi Sarmad, Mahyar Performance Improvementand Investigation of Heat Transfer in Structurally Graded Silica Aerogels with Pores Diameter Changing [Volume 2, Issue 3, 2019, Pages 41-50]
Paran, Seyed Mohamad Reza Mechanical properties improvements of O-rings manufacturing for hydraulic systems on the basis of acrylonitrile butadiene rubber through using nanoclays [Volume 1, Issue 1, 2017, Pages 39-48]
Paran, Seyed Mohammadreza Study of the effect of resin additives and aerosil on the improvement of rubber to metal adhesion [Volume 2, Issue 1, 2018, Pages 67-77]
Parsafard, Milad Lifetime Prediction of EPDM Rubber Seals Using Time-Temperature Superposition Principle and the Effect of Nanoparticles Loading on It [Volume 7, Issue 3, 2023, Pages 29-48]
Parvareh, Arsalan Experimental study of temperature and permeability effect on polymer flooding [Volume 6, Issue 3, 2022, Pages 19-28]
Payehghadr, Mahmood Fe3O4@SiO2 magnetic core-shell nanoparticles functionalized with 1,4-dihydroxyanthraquinone as an effective and recyclable adsorbent for the removal of divalent cadmium from aqueous solutions [Volume 7, Issue 3, 2023, Pages 3-17]
Peyvand, Aminollah Temperature Changes in Oil Wells and Its Effect on Tubulars Stress Condition [Volume 5, Issue 3, 2021, Pages 12-3]
Pirayeshfar, Soheil The Effect of Magnesium Particles Size and Reaction Conditions on Morphology of the Synthesized Magnesium Ethoxide [Volume 4, Issue 3, 2020, Pages 111-97]
Porgham Daryasari, Ameneh Synthesis of Zirconium-Based Coordination Polymer Luminescence Nanosensor for Detection of Trifluralin Herbicide [Volume 7, Issue 3, 2023, Pages 77-87]
Pourhossaini, Mohammad Reza Influence of swelling phenomenon on filler structure in nitrile-silica nanocomposite as resistant rubber compound to solvent [Volume 1, Issue 2, 2018, Pages 51-66]
Pourhossaini, Mohammad Reza The Effect of JP4 on Friction between NBR and Aluminum in Different Roughness [Volume 2, Issue 1, 2018, Pages 19-29]
Pourhossainy, Mohammad Reza Optimization of tear resistance and compression set at rubber spring based on EPDM/NR alloy [Volume 4, Issue 1, 2020, Pages 107-91]
Pourhossainy, Mohammad Reza Effect of swelling on the electrical behavior of nitrile/graphite rubber composite and break down of graphite network [Volume 4, Issue 3, 2020, Pages 13-3]
Pourkarim Dodangeh, Hossein Cationic PolyAcrylamide/Cellulose Nanofibril Polyelectrolytes Effect on Suspension and Network Properties of Packaging Recycled fibers [Volume 5, Issue 1, 2021, Pages 3-15]
R
Rafizadeh, Mehdi Fuzzy Control of Semibatch Poly(ethylene terephthalate) Reactor Temperature based on Linguistic Rules [Volume 4, Issue 3, 2020, Pages 68-57]
Rafizadeh, Mehdi Branching Effect on Butylene Succinate and Ethylene Terephthalate Copolyesters: Synthesis and Properties [Volume 7, Issue 2, 2023, Pages 19-30]
Rafizadeh, Mehdi Branching Effect on Butylene Succinate and Ethylene Terephthalate Copolyesters: Synthesis and Properties [Volume 7, Issue 2, 2023, Pages 19-30]
Rahimpour, Ahmad Effect of MIL-53 metal organic frameworks on performance of Pebax/PEG mixed matrix membrane for CO2/CH4 separation [Volume 3, Issue 3, 2019, Pages 69-79]
Rahimpour, Mohammad Reza Experimental study of Crude Oil demulsification by Demulsifier and process modeling by modification of Collision Frequency Function in Population Balance Equation [Volume 1, Issue 2, 2018, Pages 67-80]
Rahnama, Bahar Fabrication of PVA/Gr/TiO2 adsorbent and study of its application in removal of malachite green [Volume 3, Issue 1, 2019, Pages 59-68]
Rajabi, Zahra The effect of 5-fluorouracil loaded albumin magnetic nanoparticles on viability and cell cycle of human breast cancer MCF-7 cell line [Volume 5, Issue 1, 2021, Pages 31-41]
Ramazani S.A., Ahmad Experimental investigating the effect of adding of graphene on the improvement of convective heat transfer coefficient of water/ethylene glycol system in laminar flow [Volume 2, Issue 3, 2019, Pages 3-19]
Ramezani, Majid Use of functionalized superparamagnetic nanoparticles with Thiourea as heterogeneous catalysts in Petasis-Borono Mannich reaction [Volume 6, Issue 1, 2022, Pages 77-89]
Ramezanian, Navid Antimicrobial properties of chitosan composite with activated bentonite against Aquaculture pathogenic bacteria: Aeromonas hydrophila [Volume 2, Issue 4, 2019, Pages 75-87]
Ramsari, Mohammad Effect of Operating Parameters on the Injection of Carbon Dioxide and Sour Gas as Cushion Gas in the Process of Underground Hydrogen Gas Storage [Volume 8, Issue 1, 2024, Pages 3-11]
Ramsari, Mohammad Underground Hydrogen Storage in the Presence of Cushion Gas: Investigation of Cushion Gas Properties, Reservoir, and Operational Parameters [Volume 8, Issue 2, 2024, Pages 43-63]
Rashidi, Hamed Investigation the photo-degradation of low-density polyethylene containing pro-oxidant and photo-catalyst [Volume 6, Issue 3, 2022, Pages 3-18]
Rashidzadeh, Mehdi The role of hierarchical Y zeolites on the catalyst performance of diesel Hydrodesulfurization Process [Volume 5, Issue 3, 2021, Pages 37-27]
Rastegarzadeh, Saadat Photocatalytic Removal of Metribuzin Using Titanium Dioxide/Silver Nanocomposite [Volume 6, Issue 2, 2022, Pages 81-95]
Raveshiyan, Saba Investigation the performance of Polysulfone/Neodymium Magnetic Mixed-Matrix Membranes for O2/N2 Separation [Volume 4, Issue 2, 2020, Pages 53-68]
Raveshiyan, Saba Investigation of different methods of increasing membrane performance for oxygen/nitrogen separation [Volume 6, Issue 2, 2022, Pages 27-54]
Razavizadeh, Mahmoud Optimization of tear resistance and compression set at rubber spring based on EPDM/NR alloy [Volume 4, Issue 1, 2020, Pages 107-91]
Razavizadeh, Mahmoud Effect of swelling on the electrical behavior of nitrile/graphite rubber composite and break down of graphite network [Volume 4, Issue 3, 2020, Pages 13-3]
Razzaghi-Kashani, Mehdi The Effect of JP4 on Friction between NBR and Aluminum in Different Roughness [Volume 2, Issue 1, 2018, Pages 19-29]
Redaei, Alireza Two-Step Synthesis of PolyCarboxylate Ether by Bulk and Solution Methods [Volume 5, Issue 2, 2021, Pages 79-90]
Roomi, Aras Effect of Operating Parameters on the Injection of Carbon Dioxide and Sour Gas as Cushion Gas in the Process of Underground Hydrogen Gas Storage [Volume 8, Issue 1, 2024, Pages 3-11]
Roshan, Negin Experimental study of Crude Oil demulsification by Demulsifier and process modeling by modification of Collision Frequency Function in Population Balance Equation [Volume 1, Issue 2, 2018, Pages 67-80]
Rostami, Ehsan Effect of carbon black on morphological and mechanical properties of rubber foams produced by a single-step
method [Volume 1, Issue 1, 2017, Pages 49-60]
Rostamian, Faezeh A comprehensive review on the application of nanoparticles in the matrix of phase change materials to improve thermal properties for energy management and storage [Volume 7, Issue 4, 2023, Pages 63-93]
Rudi, Hamidreza Cationic PolyAcrylamide/Cellulose Nanofibril Polyelectrolytes Effect on Suspension and Network Properties of Packaging Recycled fibers [Volume 5, Issue 1, 2021, Pages 3-15]
S
Saadati Ardestani, Nedasadat Determination of the solubility of anticancer drugs in supercritical carbon dioxide using empirical models and artificial neural network [Volume 5, Issue 4, 2021, Pages 15-37]
Saadat Tagharoodi, Milad Optimization of tear resistance and compression set at rubber spring based on EPDM/NR alloy [Volume 4, Issue 1, 2020, Pages 107-91]
Saadat Tagharoodi, Milad Effect of swelling on the electrical behavior of nitrile/graphite rubber composite and break down of graphite network [Volume 4, Issue 3, 2020, Pages 13-3]
Sabzi Mobarake, Maryam The effect of spinneret cross-sectional shape on the physical and crimp properties of melt spun PET multifilament yarn [Volume 8, Issue 3, 2024, Pages 59-67]
Sadatnia, Behrouz Improved antifouling properties of Polyether sulfone membrane by Pluronic F-127 additive for hemodialysis application [Volume 1, Issue 1, 2017, Pages 17-30]
Sadat-Shojai, Mehdi Bioactive rod-like nanoparticles as novel filler for improving the properties of supramolecular polyester: synthesis and application [Volume 5, Issue 3, 2021, Pages 57-69]
Sadeghi, Jafar Study of the effect of operating parameters on the performance of acetylene hydrogenation reactors [Volume 5, Issue 2, 2021, Pages 91-104]
Sadeghian, Kimia Simulation of glycerol and biodiesel production process with numerical analysis and optimization of transesterification reactor by response surface method (RSM) [Volume 5, Issue 4, 2021, Pages 105-117]
Sadeghnejad, Saeid Effect of In-Situ Synthesized Cerium Oxide Nanoparticles on Oil Recovery Factor In a Glass Micromodel [Volume 6, Issue 2, 2022, Pages 3-14]
Sadrameli, Seyed Mojtaba Water desalination using solar steam generation systems based on graphite photothermal material [Volume 6, Issue 1, 2022, Pages 49-61]
Sadrameli, Seyed Mojtaba Improving the performance of graphite-based solar water desalination system by using plasmonic nickel nanoparticles and engineering the structure [Volume 6, Issue 3, 2022, Pages 75-85]
Saeb, Mohammad Reza Assessingthe crosslinking behavior of nanocomposites based on epoxy and starch-modified graphene oxide nanosheets potent to be applied as engineering coatings [Volume 1, Issue 1, 2017, Pages 61-70]
Saeedi Dehaghani, AmirHossein Experimental Investigation of Acidic Medium Effect on Seawater and Low Salinity Water for Wettability Alteration and Interfacial Tension Reduction: The Presence of Divalent and Trivalent Cations [Volume 7, Issue 1, 2023, Pages 47-59]
Saei moghaddam, Mojtaba Oxidative Dehydrogenation of Propane with CO2 Oxidant over vanadium catalyst supported on Titania-Silicon Nanostructures [Volume 2, Issue 4, 2019, Pages 65-74]
Saei moghaddam, Mojtaba Investigation on Using Amine Split Flow to Reduce Maximum Temperature of the Fajr-Jam Refinery Absorption Tower for Control Corrosion Rate [Volume 4, Issue 2, 2020, Pages 107-117]
Saei moghaddam, Mojtaba Cr (VI) Adsorption Using synthesis Novel UIO-66-MnFe2O4-TiO2 Magnetic Nanoparticles by Experimental Design [Volume 4, Issue 4, 2021, Pages 33-48]
Safaei, Elahe Effect of Graphite Source on Pore Structure and CO2 Adsorption of Graphene Aerogel [Volume 7, Issue 3, 2023, Pages 19-28]
Sajjadian, ValiAhmad Study on adsorption behavior of dilute polymeric systems based on sulfonated polyacrylamide for improving oil recovery application [Volume 1, Issue 1, 2017, Pages 5-16]
Salehi, Ehsan Removal of lead ions from aqueous solutions by adsorption operation: A review [Volume 3, Issue 1, 2019, Pages 3-28]
Sanaeepur, Hamidreza Removal of lead ions from aqueous solutions by adsorption operation: A review [Volume 3, Issue 1, 2019, Pages 3-28]
Sarabi Jamab, Mahboobe Application of Molecularly Imprinted Film for Extraction of Herbicide Mecoprop from Aqueous Sample [Volume 2, Issue 3, 2019, Pages 77-89]
Sargolzaei, Javad Investigation of Optimum Condition of Saponin Extraction by Carbon Dioxide Super Critical Fluid and Solvent [Volume 4, Issue 4, 2021, Pages 67-76]
Semnani Rahbar, Rouhollah Investigation on microstructure, morphology, and tensile properties of polypropylene/graphene nanoplatelets nanocomposite fiber in the presence of compatibilizer [Volume 4, Issue 1, 2020, Pages 30-13]
Sepehri, Sanam Study of the rheological and compatibility behavior of sulfonated acrylamide copolymer/ wheat starch blends in aqueous media [Volume 3, Issue 2, 2019, Pages 15-27]
Setayeshnia, Ali Assessment of Investment Opportunities in Iranian Petrochemical Industry through Integrated Technical, Economic and Financial Modeling of the Entire Network of Petrochemical Units [Volume 8, Issue 2, 2024, Pages 1-12]
Shabanian, Meisam Assessingthe crosslinking behavior of nanocomposites based on epoxy and starch-modified graphene oxide nanosheets potent to be applied as engineering coatings [Volume 1, Issue 1, 2017, Pages 61-70]
Shahabi Ghoyonloe, Mohammad Investigation of the TPS Effect on the Biodegradability of Agricultural Mulches Based on PLA and LDPE [Volume 4, Issue 2, 2020, Pages 3-18]
Shahhosseini, shahrokh Simulation of glycerol and biodiesel production process with numerical analysis and optimization of transesterification reactor by response surface method (RSM) [Volume 5, Issue 4, 2021, Pages 105-117]
Shahpasand, Koorosh Investigation of the Structural Properties of Dopamine-Loaded Poly(butyl cyanoacrylate) Nanosystem [Volume 3, Issue 4, 2020, Pages 73-83]
Shahraki, Farhad Study of the effect of operating parameters on the performance of acetylene hydrogenation reactors [Volume 5, Issue 2, 2021, Pages 91-104]
Shahrousvand, Mohsen Optimization of the synthesis of poly (acrylic acid)/xanthan semi-IPNs using the response surface methodology [Volume 4, Issue 3, 2020, Pages 95-81]
Shahsavari, Shadab Design of Magnetic Chitosan nanoparticles for Targeted Cancer Therapy using 5-Fluorouracil in Glycerol-Moonoleate [Volume 2, Issue 1, 2018, Pages 45-56]
Shahsavari, Shadab Performance assessment of the hybrid nanofluid mixture of iron oxide nanoparticles and graphene nanosheets in the elimination of CO2 from the air, using a venturi scrubber [Volume 6, Issue 2, 2022, Pages 69-79]
Shahsavarzadeh jangi, Pardis Investigation of Optimum Condition of Saponin Extraction by Carbon Dioxide Super Critical Fluid and Solvent [Volume 4, Issue 4, 2021, Pages 67-76]
Sharif, Alireza Effect of hydrophobic modification of scleroglucan on its adsorption behavior onto carbonate rock surface of oil reservoir [Volume 2, Issue 3, 2019, Pages 51-64]
Sharif, Mehdi The experimental study of the effect of polyacrylamide nanocomposite on reservoir rock and fluid properties in presence of formation water [Volume 3, Issue 2, 2019, Pages 29-41]
Sharifnia, Shahram Removal of Iodide from Wastewater Using Strongly Basic Anion Resin [Volume 7, Issue 2, 2023, Pages 31-46]
Shidpoor, Reza Water Uptake Improvement in Hygiene Papers by NanoHydrogel Prepared from Chitosan/Nano silver/ PolyAcrylic Acid Composite [Volume 3, Issue 3, 2019, Pages 51-60]
Shirazi Sarraf, Mohammad Javad Control of flooding phenomena in vacuum distillation tray column using operational and laboratory parameters [Volume 5, Issue 2, 2021, Pages 51-63]
Shiri, Reza Preparation and Improvement of Shear Strength of a Water-Redispersible Waterborne Acrylic Adhesive for Making Cellulose Joints [Volume 3, Issue 1, 2019, Pages 47-57]
Shiva, Mehdi Preparation of silica powder from rice husk by thermal treatment and comparison of its performance with commercial silica in blend of passenger radial tire belt [Volume 4, Issue 3, 2020, Pages 80-69]
Shiva, Mehdi Study of operating conditions of silica extraction from rice husk for Special use in rubber [Volume 5, Issue 2, 2021, Pages 65-77]
Shojaosadati, Seyed Abbas The effect of 5-fluorouracil loaded albumin magnetic nanoparticles on viability and cell cycle of human breast cancer MCF-7 cell line [Volume 5, Issue 1, 2021, Pages 31-41]
Shokouh Saljoghi, Zoheir Antimicrobial properties of chitosan composite with activated bentonite against Aquaculture pathogenic bacteria: Aeromonas hydrophila [Volume 2, Issue 4, 2019, Pages 75-87]
Shoushtari, Sharif Experimental Study of the Effect of Microwave and Ultrasonic Waves on the Upgrading and Asphaltene Content of Heavy Crude Oil [Volume 7, Issue 4, 2023, Pages 3-14]
Sobhani, Amir Arsalan Development of an adaptive soft sensor for real-time monitoring of gas composition: Implementation on the azeotropic distillation column of the vinyl acetate monomer production process [Volume 8, Issue 3, 2024, Pages 17-28]
Sohrabian, Majid An Investigation on the Effect of Nylon 6,6 and Phenolic Resin on Mechanical and Thermal Properties of Epoxy Based Adhesives [Volume 3, Issue 3, 2019, Pages 81-92]
Soleymanzadehb, Aboozar Experimental Investigation and Modeling of AOT Surfactant Adsorption on Carbonate Rock Particles [Volume 3, Issue 3, 2019, Pages 39-50]
Soltanali, Saeed The role of hierarchical Y zeolites on the catalyst performance of diesel Hydrodesulfurization Process [Volume 5, Issue 3, 2021, Pages 37-27]
Soltanali, Saeed Applying Artificial Neural Network in Prediction behavior of alkylation of m-Cresol with isopropanol process and yield optimization by Bee Colony algorithm [Volume 5, Issue 4, 2021, Pages 69-78]
Soltanali, Saeed Investigating of Treated Natural Zeolite as a Catalyst Support for Propane Oxidative Dehydrogenation Process [Volume 6, Issue 2, 2022, Pages 15-26]
Soltanali, Saeed Evaluation of propane dehydrogenation catalysts: catalyst development, chemistry, and challenges [Volume 7, Issue 2, 2023, Pages 17-37]
Soltanolkottabi, Fariba The effect of reaction parameters in phenol formaldehyde resin synthesis and the evaluation of product properties [Volume 6, Issue 4, 2022, Pages 23-32]
T
Taghavi, Lobat Fixedâbed column studies of nitrate ion adsorption using modified montmorillonite adsorbent [Volume 4, Issue 4, 2021, Pages 89-105]
Talebi, Zahra Synthesis and properties of super hydrophobic silica aerogel/basalt fibers blanket by ambient drying method [Volume 1, Issue 1, 2017, Pages 31-38]
Talebi, Zahra Effect of Graphite Source on Pore Structure and CO2 Adsorption of Graphene Aerogel [Volume 7, Issue 3, 2023, Pages 19-28]
Tavakoli Targhi, Fatemeh Design, fabrication and characterization of electrospun wound dressing composed of polyvinyl alcohol/Aloe Vera [Volume 4, Issue 2, 2020, Pages 83-93]
Tavanaie, Mohammad Ali The effect of spinneret cross-sectional shape on the physical and crimp properties of melt spun PET multifilament yarn [Volume 8, Issue 3, 2024, Pages 59-67]
Tavangar, Saeed Investigation of effective parameters on synthesis of Goethite with solution oxidation method in the laboratory scale [Volume 6, Issue 4, 2022]
Tayyebi, Shokoufe Applying Artificial Neural Network in Prediction behavior of alkylation of m-Cresol with isopropanol process and yield optimization by Bee Colony algorithm [Volume 5, Issue 4, 2021, Pages 69-78]
Tayyebi, Shokoufe A 2-Dim CFD model development for petroleum coke calcination process in rotary kiln [Volume 6, Issue 4, 2022, Pages 57-68]
Teymoori Tafazol, Hosein The Effects of Cooling Method on Final Mechanical and Thermal Properties of Polyethylene Tanks Manufactured by Rotational Molding [Volume 4, Issue 4, 2021, Pages 23-31]
Torkaman, Parya Experimental investigation of Fe3O4 and Activated Carbon effect on the and heavy oil upgrading process by Electromagnetic heating [Volume 7, Issue 1, 2023, Pages 3-15]
Towfighi, Jafar Sonochemical synthesis of HZSM-5 nanocatalyst with improved physiochemical properties [Volume 2, Issue 4, 2019, Pages 33-52]
Towfighi Darian, Jafar Investigating of Treated Natural Zeolite as a Catalyst Support for Propane Oxidative Dehydrogenation Process [Volume 6, Issue 2, 2022, Pages 15-26]
V
Vafaei, Mohsen Investigation of the performance of silica nanoparticles in increasing the strength of a polymer gel prepared by polyacrylamide in oil well condition [Volume 1, Issue 2, 2018, Pages 39-49]
Vafaie-Sefti, Mohsen Rheological properties evaluation of hydrogels based on xanthan polymer in the presence of nanoparticles [Volume 7, Issue 3, 2023, Pages 67-76]
Vahidifar, Ali Effect of carbon black on morphological and mechanical properties of rubber foams produced by a single-step
method [Volume 1, Issue 1, 2017, Pages 49-60]
Valipour Goudarzi, Babak Thermal properties improvement of multilayer
super insulators based on novolac aerogel [Volume 2, Issue 1, 2018, Pages 3-18]
Vaziri, Ali Fabrication of nanocomposite scaffold based on bacterial cellulose/zinc oxide nanoparticles/polypyrrole with antibacterial and cytotoxicity assessment [Volume 5, Issue 2, 2021, Pages 37-50]
Vaziri Yazdi, Ali Design of Magnetic Chitosan nanoparticles for Targeted Cancer Therapy using 5-Fluorouracil in Glycerol-Moonoleate [Volume 2, Issue 1, 2018, Pages 45-56]
Veiskaramia, Sepideh Experimental Investigation and Modeling of AOT Surfactant Adsorption on Carbonate Rock Particles [Volume 3, Issue 3, 2019, Pages 39-50]
Y
Yaghmaei, Soheila Cu biorecovery from electronic wastes without daily pH adjusting using Acidithiobacillus ferrooxidans [Volume 2, Issue 1, 2018, Pages 57-65]
Yaghoobpour, Elham Evaluation of propane dehydrogenation catalysts: catalyst development, chemistry, and challenges [Volume 7, Issue 2, 2023, Pages 17-37]
Yahaghi, Effat Measurement of Surface and Shallow depth Changes of Polypropylene Due to Gliding Discharge Plasma [Volume 7, Issue 2, 2023, Pages 47-57]
Yarahmadi, Elham Assessingthe crosslinking behavior of nanocomposites based on epoxy and starch-modified graphene oxide nanosheets potent to be applied as engineering coatings [Volume 1, Issue 1, 2017, Pages 61-70]
Yazdan panah, Mohamad reza Optimization of mechanical properties of PP-polymer foam fabricated via extruder [Volume 5, Issue 1, 2021, Pages 105-120]
Yeganeh Majd, Navid Determination of the solubility of anticancer drugs in supercritical carbon dioxide using empirical models and artificial neural network [Volume 5, Issue 4, 2021, Pages 15-37]
Z
Zadhoush, Ali Synthesis and properties of super hydrophobic silica aerogel/basalt fibers blanket by ambient drying method [Volume 1, Issue 1, 2017, Pages 31-38]
Zahakifar, Fazel Solvent extraction of Ce(IV) from sulfuric acid solutions using Cyanex 921 and its mixtures with D2EHPA [Volume 5, Issue 1, 2021, Pages 87-103]
Zahedipoor, Ahmadreza Fabrication of nanocomposite membrane based on polysulfone and modified Titanium oxide nanoparticles and its performance in industrial wastewater treatment using osmotic membrane bioreactor process [Volume 6, Issue 3, 2022, Pages 61-73]
Zamanpour, Sepehr Impact of Aqueous Phase Ion Type and Concentration on Calcite Surface Wettability and Acidic Oil-Brine IFT [Volume 4, Issue 2, 2020, Pages 19-34]
Zandi, As'ad Evaluation of Tack and Shear Strength of Pressure-Sensitive Adhesives Comprised of Polyurethane and Acrylic Copolymer Blend [Volume 5, Issue 4, 2021, Pages 55-67]
Zare Aliabadi, Hasan Investigation on Using Amine Split Flow to Reduce Maximum Temperature of the Fajr-Jam Refinery Absorption Tower for Control Corrosion Rate [Volume 4, Issue 2, 2020, Pages 107-117]
Zarei, Ghasem Potential assessment of non-edible sources for biodiesel production in Iran [Volume 5, Issue 2, 2021, Pages 17-36]
Zareie, Camellia Investigation of the performance of silica nanoparticles in increasing the strength of a polymer gel prepared by polyacrylamide in oil well condition [Volume 1, Issue 2, 2018, Pages 39-49]
Zargar, Behrooz Photocatalytic Removal of Metribuzin Using Titanium Dioxide/Silver Nanocomposite [Volume 6, Issue 2, 2022, Pages 81-95]
Ziatabar, Seysd Ali Preparation of silica powder from rice husk by thermal treatment and comparison of its performance with commercial silica in blend of passenger radial tire belt [Volume 4, Issue 3, 2020, Pages 80-69]
