Journal of Applied Research of Chemical -Polymer Engineering

Home

Guide for Authors

Submit Manuscript

Reviewers

Contact Us

Keyword Index
A
  • Acidithiobacillus ferrooxidans Cu biorecovery from electronic wastes without daily pH adjusting using Acidithiobacillus ferrooxidans [Volume 2, Issue 1, 2018, Pages 57-65]
  • Acid-Thermal Method Antimicrobial properties of chitosan composite with activated bentonite against Aquaculture pathogenic bacteria: Aeromonas hydrophila [Volume 2, Issue 4, 2018, Pages 75-87]
  • Adhesion Study of the effect of resin additives and aerosil on the improvement of rubber to metal adhesion [Volume 2, Issue 1, 2018, Pages 67-77]
  • Adhesive Epoxy Waste tire powder Silica Mechanical properties An Investigation on the Effect of Silica Filler and Waste Tire Powder Toughener on Mechanical and Thermal Properties of Epoxy Based Adhesives [Volume 2, Issue 2, 2018, Pages 57-73]
  • Adsorption Effect of hydrophobic modification of scleroglucan on its adsorption behavior onto carbonate rock surface of oil reservoir [Volume 2, Issue 3, 2018, Pages 51-64]
  • Aeromonas hydrophila Antimicrobial properties of chitosan composite with activated bentonite against Aquaculture pathogenic bacteria: Aeromonas hydrophila [Volume 2, Issue 4, 2018, Pages 75-87]
  • Aerosil Study of the effect of resin additives and aerosil on the improvement of rubber to metal adhesion [Volume 2, Issue 1, 2018, Pages 67-77]
  • Aluminum The Effect of JP4 on Friction between NBR and Aluminum in Different Roughness [Volume 2, Issue 1, 2018, Pages 19-29]
  • Antimicrobial effect Antimicrobial properties of chitosan composite with activated bentonite against Aquaculture pathogenic bacteria: Aeromonas hydrophila [Volume 2, Issue 4, 2018, Pages 75-87]
B
  • Bentonite Optimization of PVA/Nano-Bentonite Nanofiber Composite Production for Improving Mechanical and Thermal Properties [Volume 2, Issue 2, 2018, Pages 17-28]
  • Bentonite Antimicrobial properties of chitosan composite with activated bentonite against Aquaculture pathogenic bacteria: Aeromonas hydrophila [Volume 2, Issue 4, 2018, Pages 75-87]
  • Binder Investigation the effect of NCO/OH ratio, amount and type of curing catayst on the Pot life of HTPB based binder system [Volume 2, Issue 3, 2018, Pages 65-76]
  • Bioleaching Cu biorecovery from electronic wastes without daily pH adjusting using Acidithiobacillus ferrooxidans [Volume 2, Issue 1, 2018, Pages 57-65]
C
  • Carbon aerogel Effect of Coal Tar Pitch on Improvement of Thermal Insulation Performance of Carbon Aerogels Based on Novolac Resin [Volume 2, Issue 4, 2018, Pages 53-64]
  • Catalyst Investigation the effect of NCO/OH ratio, amount and type of curing catayst on the Pot life of HTPB based binder system [Volume 2, Issue 3, 2018, Pages 65-76]
  • Chitin-glucan polysaccharide A Study of growth and chitin-Glucan complex production kinetics in submerged culture of medicinal fungus Ganoderma lucidum [Volume 2, Issue 1, 2018, Pages 31-43]
  • Chitosan Design of Magnetic Chitosan nanoparticles for Targeted Cancer Therapy using 5-Fluorouracil in Glycerol-Moonoleate [Volume 2, Issue 1, 2018, Pages 45-56]
  • Chitosan Synthesis and evaluation of cytotoxicity of hybrid hydrogel based on chitosan and Ph.ZnO@HAP nanocomposite [Volume 2, Issue 4, 2018, Pages 19-31]
  • Chitosan Composite Antimicrobial properties of chitosan composite with activated bentonite against Aquaculture pathogenic bacteria: Aeromonas hydrophila [Volume 2, Issue 4, 2018, Pages 75-87]
  • Clay Nanoparticles Feasibility Study and Microscopic Investigation of the Mechanism of Enhanced Oil Recovery Process Using Injection of Clay Nanoparticles into the Glass Micromodel [Volume 2, Issue 2, 2018, Pages 41-56]
  • Coal tar pitch Effect of Coal Tar Pitch on Improvement of Thermal Insulation Performance of Carbon Aerogels Based on Novolac Resin [Volume 2, Issue 4, 2018, Pages 53-64]
  • Convective heat transfer coefficient Experimental investigating the effect of adding of graphene on the improvement of convective heat transfer coefficient of water/ethylene glycol system in laminar flow [Volume 2, Issue 3, 2018, Pages 3-19]
  • Cu recovery Cu biorecovery from electronic wastes without daily pH adjusting using Acidithiobacillus ferrooxidans [Volume 2, Issue 1, 2018, Pages 57-65]
  • Cytotoxicity Synthesis and evaluation of cytotoxicity of hybrid hydrogel based on chitosan and Ph.ZnO@HAP nanocomposite [Volume 2, Issue 4, 2018, Pages 19-31]
E
  • Electronic waste Cu biorecovery from electronic wastes without daily pH adjusting using Acidithiobacillus ferrooxidans [Volume 2, Issue 1, 2018, Pages 57-65]
  • Electrospinning Optimization of PVA/Nano-Bentonite Nanofiber Composite Production for Improving Mechanical and Thermal Properties [Volume 2, Issue 2, 2018, Pages 17-28]
  • Enhanced oil recovery Feasibility Study and Microscopic Investigation of the Mechanism of Enhanced Oil Recovery Process Using Injection of Clay Nanoparticles into the Glass Micromodel [Volume 2, Issue 2, 2018, Pages 41-56]
F
  • Friction mechanism The Effect of JP4 on Friction between NBR and Aluminum in Different Roughness [Volume 2, Issue 1, 2018, Pages 19-29]
G
  • Ganoderma lucidum A Study of growth and chitin-Glucan complex production kinetics in submerged culture of medicinal fungus Ganoderma lucidum [Volume 2, Issue 1, 2018, Pages 31-43]
  • Gelycerol Moonoleate Design of Magnetic Chitosan nanoparticles for Targeted Cancer Therapy using 5-Fluorouracil in Glycerol-Moonoleate [Volume 2, Issue 1, 2018, Pages 45-56]
  • Gradient Structure Performance Improvementand Investigation of Heat Transfer in Structurally Graded Silica Aerogels with Pores Diameter Changing [Volume 2, Issue 3, 2018, Pages 41-50]
  • Graphene Experimental investigating the effect of adding of graphene on the improvement of convective heat transfer coefficient of water/ethylene glycol system in laminar flow [Volume 2, Issue 3, 2018, Pages 3-19]
H
  • Heat Transfer Performance Improvementand Investigation of Heat Transfer in Structurally Graded Silica Aerogels with Pores Diameter Changing [Volume 2, Issue 3, 2018, Pages 41-50]
  • Hydrogel Synthesis and evaluation of cytotoxicity of hybrid hydrogel based on chitosan and Ph.ZnO@HAP nanocomposite [Volume 2, Issue 4, 2018, Pages 19-31]
  • Hydrophilic polymer Effect of hydrophobic modification of scleroglucan on its adsorption behavior onto carbonate rock surface of oil reservoir [Volume 2, Issue 3, 2018, Pages 51-64]
  • Hydrophobic modification Effect of hydrophobic modification of scleroglucan on its adsorption behavior onto carbonate rock surface of oil reservoir [Volume 2, Issue 3, 2018, Pages 51-64]
  • Hydroxyapatite Synthesis and evaluation of cytotoxicity of hybrid hydrogel based on chitosan and Ph.ZnO@HAP nanocomposite [Volume 2, Issue 4, 2018, Pages 19-31]
I
  • Interfacial Surface Tension Feasibility Study and Microscopic Investigation of the Mechanism of Enhanced Oil Recovery Process Using Injection of Clay Nanoparticles into the Glass Micromodel [Volume 2, Issue 2, 2018, Pages 41-56]
J
  • JP4 The Effect of JP4 on Friction between NBR and Aluminum in Different Roughness [Volume 2, Issue 1, 2018, Pages 19-29]
K
  • Kinetic model A Study of growth and chitin-Glucan complex production kinetics in submerged culture of medicinal fungus Ganoderma lucidum [Volume 2, Issue 1, 2018, Pages 31-43]
L
  • Laminar flow Experimental investigating the effect of adding of graphene on the improvement of convective heat transfer coefficient of water/ethylene glycol system in laminar flow [Volume 2, Issue 3, 2018, Pages 3-19]
M
  • Magnetic nanoparticles Design of Magnetic Chitosan nanoparticles for Targeted Cancer Therapy using 5-Fluorouracil in Glycerol-Moonoleate [Volume 2, Issue 1, 2018, Pages 45-56]
  • Mechanical-dynamic properties Effect of Drying Temperature and Mechanical Pressure on Surface Structure and Dynamical Properties of Polyaniline Nanostructured Film [Volume 2, Issue 2, 2018, Pages 3-16]
  • Medicinal mushroom A Study of growth and chitin-Glucan complex production kinetics in submerged culture of medicinal fungus Ganoderma lucidum [Volume 2, Issue 1, 2018, Pages 31-43]
  • Metal Study of the effect of resin additives and aerosil on the improvement of rubber to metal adhesion [Volume 2, Issue 1, 2018, Pages 67-77]
  • Montmorillonite Optimization of PVA/Nano-Bentonite Nanofiber Composite Production for Improving Mechanical and Thermal Properties [Volume 2, Issue 2, 2018, Pages 17-28]
  • MTBE Encapsulation of MTBE octane booster by inverse mini-emulsion polymerization [Volume 2, Issue 2, 2018, Pages 29-39]
  • Multilayer super insulator Thermal properties improvement of multilayer super insulators based on novolac aerogel [Volume 2, Issue 1, 2018, Pages 3-18]
N
  • Nanofiber Optimization of PVA/Nano-Bentonite Nanofiber Composite Production for Improving Mechanical and Thermal Properties [Volume 2, Issue 2, 2018, Pages 17-28]
  • Nanofluid Experimental investigating the effect of adding of graphene on the improvement of convective heat transfer coefficient of water/ethylene glycol system in laminar flow [Volume 2, Issue 3, 2018, Pages 3-19]
  • Nanostructured film Effect of Drying Temperature and Mechanical Pressure on Surface Structure and Dynamical Properties of Polyaniline Nanostructured Film [Volume 2, Issue 2, 2018, Pages 3-16]
  • Nano-structure spacer Thermal properties improvement of multilayer super insulators based on novolac aerogel [Volume 2, Issue 1, 2018, Pages 3-18]
  • NBR The Effect of JP4 on Friction between NBR and Aluminum in Different Roughness [Volume 2, Issue 1, 2018, Pages 19-29]
  • Novolac resin Effect of Coal Tar Pitch on Improvement of Thermal Insulation Performance of Carbon Aerogels Based on Novolac Resin [Volume 2, Issue 4, 2018, Pages 53-64]
P
  • Pollutant Application of Molecularly Imprinted Film for Extraction of Herbicide Mecoprop from Aqueous Sample [Volume 2, Issue 3, 2018, Pages 77-89]
  • Polyaniline Effect of Drying Temperature and Mechanical Pressure on Surface Structure and Dynamical Properties of Polyaniline Nanostructured Film [Volume 2, Issue 2, 2018, Pages 3-16]
  • Polymeric aerogels Thermal properties improvement of multilayer super insulators based on novolac aerogel [Volume 2, Issue 1, 2018, Pages 3-18]
  • PVA Optimization of PVA/Nano-Bentonite Nanofiber Composite Production for Improving Mechanical and Thermal Properties [Volume 2, Issue 2, 2018, Pages 17-28]
  • Pyrolysis Effect of Coal Tar Pitch on Improvement of Thermal Insulation Performance of Carbon Aerogels Based on Novolac Resin [Volume 2, Issue 4, 2018, Pages 53-64]
R
  • Reflector layer Thermal properties improvement of multilayer super insulators based on novolac aerogel [Volume 2, Issue 1, 2018, Pages 3-18]
  • Resin Study of the effect of resin additives and aerosil on the improvement of rubber to metal adhesion [Volume 2, Issue 1, 2018, Pages 67-77]
  • Rubber Study of the effect of resin additives and aerosil on the improvement of rubber to metal adhesion [Volume 2, Issue 1, 2018, Pages 67-77]
  • R value Investigation the effect of NCO/OH ratio, amount and type of curing catayst on the Pot life of HTPB based binder system [Volume 2, Issue 3, 2018, Pages 65-76]
S
  • Scleroglucan Effect of hydrophobic modification of scleroglucan on its adsorption behavior onto carbonate rock surface of oil reservoir [Volume 2, Issue 3, 2018, Pages 51-64]
  • Silica aerogel Performance Improvementand Investigation of Heat Transfer in Structurally Graded Silica Aerogels with Pores Diameter Changing [Volume 2, Issue 3, 2018, Pages 41-50]
  • Silicon Oxidative Dehydrogenation of Propane with CO2 Oxidant over vanadium catalyst supported on Titania-Silicon Nanostructures [Volume 2, Issue 4, 2018, Pages 65-74]
  • Spiral tube Experimental investigating the effect of adding of graphene on the improvement of convective heat transfer coefficient of water/ethylene glycol system in laminar flow [Volume 2, Issue 3, 2018, Pages 3-19]
  • Stability Feasibility Study and Microscopic Investigation of the Mechanism of Enhanced Oil Recovery Process Using Injection of Clay Nanoparticles into the Glass Micromodel [Volume 2, Issue 2, 2018, Pages 41-56]
  • Surface roughness The Effect of JP4 on Friction between NBR and Aluminum in Different Roughness [Volume 2, Issue 1, 2018, Pages 19-29]
  • Synthesis Effect of Component of Preformed Particle Gels on Swelling Ratio [Volume 2, Issue 4, 2018, Pages 1-17]
T
  • Targeted delivery Design of Magnetic Chitosan nanoparticles for Targeted Cancer Therapy using 5-Fluorouracil in Glycerol-Moonoleate [Volume 2, Issue 1, 2018, Pages 45-56]
  • Temperature and pressure effects Effect of Drying Temperature and Mechanical Pressure on Surface Structure and Dynamical Properties of Polyaniline Nanostructured Film [Volume 2, Issue 2, 2018, Pages 3-16]
  • Thermal properties Effect of Drying Temperature and Mechanical Pressure on Surface Structure and Dynamical Properties of Polyaniline Nanostructured Film [Volume 2, Issue 2, 2018, Pages 3-16]
  • Thermal properties Effect of Coal Tar Pitch on Improvement of Thermal Insulation Performance of Carbon Aerogels Based on Novolac Resin [Volume 2, Issue 4, 2018, Pages 53-64]
  • Thermal stability An Investigation on the Effect of Silica Filler and Waste Tire Powder Toughener on Mechanical and Thermal Properties of Epoxy Based Adhesives [Volume 2, Issue 2, 2018, Pages 57-73]
  • Titania Nanostructures Oxidative Dehydrogenation of Propane with CO2 Oxidant over vanadium catalyst supported on Titania-Silicon Nanostructures [Volume 2, Issue 4, 2018, Pages 65-74]
V
  • Viscosity Feasibility Study and Microscopic Investigation of the Mechanism of Enhanced Oil Recovery Process Using Injection of Clay Nanoparticles into the Glass Micromodel [Volume 2, Issue 2, 2018, Pages 41-56]
  • Viscosity Studying experimental data related to change in viscosity of crude oil [Volume 2, Issue 2, 2018, Pages 75-89]
  • Viscosity Investigation the effect of NCO/OH ratio, amount and type of curing catayst on the Pot life of HTPB based binder system [Volume 2, Issue 3, 2018, Pages 65-76]
W
  • Water Application of Molecularly Imprinted Film for Extraction of Herbicide Mecoprop from Aqueous Sample [Volume 2, Issue 3, 2018, Pages 77-89]