Aalaie, Jamal Effect of hydrophobic modification of scleroglucan on its adsorption behavior onto carbonate rock surface of oil reservoir [Volume 2, Issue 3, 2019, Pages 51-64]
Akbari, Iman Experimental investigating the effect of adding of graphene on the improvement of convective heat transfer coefficient of water/ethylene glycol system in laminar flow [Volume 2, Issue 3, 2019, Pages 3-19]
Arshadi, Mahdokht Cu biorecovery from electronic wastes without daily pH adjusting using Acidithiobacillus ferrooxidans [Volume 2, Issue 1, 2018, Pages 57-65]
Asgarzadeh, Maryam Design of Magnetic Chitosan nanoparticles for Targeted Cancer Therapy using 5-Fluorouracil in Glycerol-Moonoleate [Volume 2, Issue 1, 2018, Pages 45-56]
Azargoon, Mohsen Investigation the effect of NCO/OH ratio, amount and type of curing catayst on the Pot life of HTPB based binder system [Volume 2, Issue 3, 2019, Pages 65-76]
B
BAHRAMIAN, ALIREZA Effect of Drying Temperature and Mechanical Pressure on Surface Structure and Dynamical Properties of Polyaniline Nanostructured Film [Volume 2, Issue 2, 2018, Pages 3-16]
BAHRAMIAN, ALIREZA Effect of Drying Temperature and Mechanical Pressure on Surface Structure and Dynamical Properties of Polyaniline Nanostructured Film [Volume 2, Issue 2, 2018, Pages 3-16]
Baniasadi, Hossein Experimental investigating the effect of adding of graphene on the improvement of convective heat transfer coefficient of water/ethylene glycol system in laminar flow [Volume 2, Issue 3, 2019, Pages 3-19]
Barkhordari, Vahid Feasibility Study and Microscopic Investigation of the Mechanism of Enhanced Oil Recovery Process Using Injection of Clay Nanoparticles into the Glass Micromodel [Volume 2, Issue 2, 2018, Pages 41-56]
E
Ebrahimduost, Parisa Experimental investigating the effect of adding of graphene on the improvement of convective heat transfer coefficient of water/ethylene glycol system in laminar flow [Volume 2, Issue 3, 2019, Pages 3-19]
Ebrahimi-Hosseinzadeh, Bahman Optimization of PVA/Nano-Bentonite Nanofiber Composite Production for Improving Mechanical and Thermal Properties [Volume 2, Issue 2, 2018, Pages 17-28]
Emrani, S. Mahdieh The Effect of JP4 on Friction between NBR and Aluminum in Different Roughness [Volume 2, Issue 1, 2018, Pages 19-29]
F
Farhadian, Omidvar Antimicrobial properties of chitosan composite with activated bentonite against Aquaculture pathogenic bacteria: Aeromonas hydrophila [Volume 2, Issue 4, 2019, Pages 75-87]
Fereydoon Yaripour, Fereydoon x Sonochemical synthesis of HZSM-5 nanocatalyst with improved physiochemical properties [Volume 2, Issue 4, 2019, Pages 33-52]
G
Gharibshahi, reza Feasibility Study and Microscopic Investigation of the Mechanism of Enhanced Oil Recovery Process Using Injection of Clay Nanoparticles into the Glass Micromodel [Volume 2, Issue 2, 2018, Pages 41-56]
Ghorani, Behrouz Application of Molecularly Imprinted Film for Extraction of Herbicide Mecoprop from Aqueous Sample [Volume 2, Issue 3, 2019, Pages 77-89]
H
Hatamian-Zarmi, Ashrafalsadat Optimization of PVA/Nano-Bentonite Nanofiber Composite Production for Improving Mechanical and Thermal Properties [Volume 2, Issue 2, 2018, Pages 17-28]
K
Kebritchi, Abbas Investigation the effect of NCO/OH ratio, amount and type of curing catayst on the Pot life of HTPB based binder system [Volume 2, Issue 3, 2019, Pages 65-76]
M
Mahdizadeh, Soheila Optimization of PVA/Nano-Bentonite Nanofiber Composite Production for Improving Mechanical and Thermal Properties [Volume 2, Issue 2, 2018, Pages 17-28]
Mansouri, Elaheh Application of Molecularly Imprinted Film for Extraction of Herbicide Mecoprop from Aqueous Sample [Volume 2, Issue 3, 2019, Pages 77-89]
Mohajeri, Seyed Ahmad Application of Molecularly Imprinted Film for Extraction of Herbicide Mecoprop from Aqueous Sample [Volume 2, Issue 3, 2019, Pages 77-89]
Mokhtari-Hosseini, Zahra-Beagom Optimization of PVA/Nano-Bentonite Nanofiber Composite Production for Improving Mechanical and Thermal Properties [Volume 2, Issue 2, 2018, Pages 17-28]
Moniri, Elham Design of Magnetic Chitosan nanoparticles for Targeted Cancer Therapy using 5-Fluorouracil in Glycerol-Moonoleate [Volume 2, Issue 1, 2018, Pages 45-56]
Mousavi, Seyed mohammad Sonochemical synthesis of HZSM-5 nanocatalyst with improved physiochemical properties [Volume 2, Issue 4, 2019, Pages 33-52]
Mousavi, Seyyed Mohammad Cu biorecovery from electronic wastes without daily pH adjusting using Acidithiobacillus ferrooxidans [Volume 2, Issue 1, 2018, Pages 57-65]
N
Nazari, Mosa Investigation the effect of NCO/OH ratio, amount and type of curing catayst on the Pot life of HTPB based binder system [Volume 2, Issue 3, 2019, Pages 65-76]
Noroozi, Mina Performance Improvementand Investigation of Heat Transfer in Structurally Graded Silica Aerogels with Pores Diameter Changing [Volume 2, Issue 3, 2019, Pages 41-50]
O
Oveisi, Hamid Synthesis and evaluation of cytotoxicity of hybrid hydrogel based on chitosan and Ph.ZnO@HAP nanocomposite [Volume 2, Issue 4, 2019, Pages 19-31]
Ozeiri, Mozhdeh Effect of hydrophobic modification of scleroglucan on its adsorption behavior onto carbonate rock surface of oil reservoir [Volume 2, Issue 3, 2019, Pages 51-64]
P
Panahi Sarmad, Mahyar Performance Improvementand Investigation of Heat Transfer in Structurally Graded Silica Aerogels with Pores Diameter Changing [Volume 2, Issue 3, 2019, Pages 41-50]
Paran, Seyed Mohammadreza Study of the effect of resin additives and aerosil on the improvement of rubber to metal adhesion [Volume 2, Issue 1, 2018, Pages 67-77]
Pourhossaini, Mohammad Reza The Effect of JP4 on Friction between NBR and Aluminum in Different Roughness [Volume 2, Issue 1, 2018, Pages 19-29]
R
Ramazani S.A., Ahmad Experimental investigating the effect of adding of graphene on the improvement of convective heat transfer coefficient of water/ethylene glycol system in laminar flow [Volume 2, Issue 3, 2019, Pages 3-19]
Ramezanian, Navid Antimicrobial properties of chitosan composite with activated bentonite against Aquaculture pathogenic bacteria: Aeromonas hydrophila [Volume 2, Issue 4, 2019, Pages 75-87]
Razzaghi-Kashani, Mehdi The Effect of JP4 on Friction between NBR and Aluminum in Different Roughness [Volume 2, Issue 1, 2018, Pages 19-29]
S
Saei moghaddam, Mojtaba Oxidative Dehydrogenation of Propane with CO2 Oxidant over vanadium catalyst supported on Titania-Silicon Nanostructures [Volume 2, Issue 4, 2019, Pages 65-74]
Sarabi Jamab, Mahboobe Application of Molecularly Imprinted Film for Extraction of Herbicide Mecoprop from Aqueous Sample [Volume 2, Issue 3, 2019, Pages 77-89]
Shahsavari, Shadab Design of Magnetic Chitosan nanoparticles for Targeted Cancer Therapy using 5-Fluorouracil in Glycerol-Moonoleate [Volume 2, Issue 1, 2018, Pages 45-56]
Sharif, Alireza Effect of hydrophobic modification of scleroglucan on its adsorption behavior onto carbonate rock surface of oil reservoir [Volume 2, Issue 3, 2019, Pages 51-64]
Shokouh Saljoghi, Zoheir Antimicrobial properties of chitosan composite with activated bentonite against Aquaculture pathogenic bacteria: Aeromonas hydrophila [Volume 2, Issue 4, 2019, Pages 75-87]
T
Towfighi, Jafar Sonochemical synthesis of HZSM-5 nanocatalyst with improved physiochemical properties [Volume 2, Issue 4, 2019, Pages 33-52]
V
Valipour Goudarzi, Babak Thermal properties improvement of multilayer
super insulators based on novolac aerogel [Volume 2, Issue 1, 2018, Pages 3-18]
Vaziri Yazdi, Ali Design of Magnetic Chitosan nanoparticles for Targeted Cancer Therapy using 5-Fluorouracil in Glycerol-Moonoleate [Volume 2, Issue 1, 2018, Pages 45-56]
Y
Yaghmaei, Soheila Cu biorecovery from electronic wastes without daily pH adjusting using Acidithiobacillus ferrooxidans [Volume 2, Issue 1, 2018, Pages 57-65]
