Abdoos, Hassan Epoxy Modification by Polyurethane and Its Effects on Abrasion and Adhesion Properties [Volume 5, Issue 3, 2021, Pages 83-94]
Alamdar milani, Saeid Leaching and recovery of selenium from Sar-cheshmeh copper anode slimes [Volume 5, Issue 1, 2021, Pages 57-67]
Alamdar Milani, Saeed Solvent extraction of Ce(IV) from sulfuric acid solutions using Cyanex 921 and its mixtures with D2EHPA [Volume 5, Issue 1, 2021, Pages 87-103]
Amani, Mitra Determination of the solubility of anticancer drugs in supercritical carbon dioxide using empirical models and artificial neural network [Volume 5, Issue 4, 2021, Pages 15-37]
Amini, Amin Poly (Vinyl Ferrocene)/Hydroxyl terminated polybutadiene (PVF/HTPB) blend as a Catalyst: Preparation, Characterization and Comparison [Volume 5, Issue 4, 2021, Pages 79-90]
Asefnejad, Azadeh Fabrication of nanocomposite scaffold based on bacterial cellulose/zinc oxide nanoparticles/polypyrrole with antibacterial and cytotoxicity assessment [Volume 5, Issue 2, 2021, Pages 37-50]
Asgharinezhad, Aliakbar EDTA-functionalized Fe3O4@SiO2 magnetic nanoadsorbent for divalent cadmium removal from aqueous solutions [Volume 5, Issue 3, 2021, Pages 95-106]
Ashtianifar, Mehdi Solvent extraction of Ce(IV) from sulfuric acid solutions using Cyanex 921 and its mixtures with D2EHPA [Volume 5, Issue 1, 2021, Pages 87-103]
Azimi, Hamidreza Optimization of mechanical properties of PP-polymer foam fabricated via extruder [Volume 5, Issue 1, 2021, Pages 105-120]
Azizi, Alireza Preparation and study of physical and mechanical behavior of polylactic acid bionanocomposites reinforced with Cellulose Nanocrystal and silver nanoparticles [Volume 5, Issue 3, 2021, Pages 25-13]
B
Bagheri, Fatemeh The effect of 5-fluorouracil loaded albumin magnetic nanoparticles on viability and cell cycle of human breast cancer MCF-7 cell line [Volume 5, Issue 1, 2021, Pages 31-41]
Bahraminejad, Hossein Concentration-Behavioral, Adsorption, Flooding, Relative Permeability Studies of Polymer Nanocomposite in Two Reservoir Lithologies [Volume 5, Issue 1, 2021, Pages 69-86]
Bahramnia, Hamed Epoxy Modification by Polyurethane and Its Effects on Abrasion and Adhesion Properties [Volume 5, Issue 3, 2021, Pages 83-94]
Bayat, Mehdi Study of the effect of operating parameters on the performance of acetylene hydrogenation reactors [Volume 5, Issue 2, 2021, Pages 91-104]
E
Esfandyari, Morteza Modeling of a synthesis gas production reactor using Aspen plus [Volume 5, Issue 2, 2021, Pages 3-15]
Esmaeilpour, Mohsen EDTA-functionalized Fe3O4@SiO2 magnetic nanoadsorbent for divalent cadmium removal from aqueous solutions [Volume 5, Issue 3, 2021, Pages 95-106]
F
Faghihi, Morteza EDTA-functionalized Fe3O4@SiO2 magnetic nanoadsorbent for divalent cadmium removal from aqueous solutions [Volume 5, Issue 3, 2021, Pages 95-106]
Fallah Ramezani, Saeed Substrate concentration control in a bio-reactor for bio-hydrogen production via feedback linearization [Volume 5, Issue 4, 2021, Pages 91-103]
Farah vashi, Maryam Modeling of a synthesis gas production reactor using Aspen plus [Volume 5, Issue 2, 2021, Pages 3-15]
Fazaelizadeh, Mohammad Temperature Changes in Oil Wells and Its Effect on Tubulars Stress Condition [Volume 5, Issue 3, 2021, Pages 12-3]
G
Ghadiri-Ghalenazeri, Saeed Bioactive rod-like nanoparticles as novel filler for improving the properties of supramolecular polyester: synthesis and application [Volume 5, Issue 3, 2021, Pages 57-69]
Ghahramanafshar, Majid EDTA-functionalized Fe3O4@SiO2 magnetic nanoadsorbent for divalent cadmium removal from aqueous solutions [Volume 5, Issue 3, 2021, Pages 95-106]
Ghane, Sara Investigation of Lignin-based activated carbon synthesis parameters on its structural properties [Volume 5, Issue 3, 2021, Pages 71-81]
Ghasemirad, Somayeh Evaluation of Tack and Shear Strength of Pressure-Sensitive Adhesives Comprised of Polyurethane and Acrylic Copolymer Blend [Volume 5, Issue 4, 2021, Pages 55-67]
GhaziTabatabaei, Zohreh Investigation of influence of the Styrene Butadiene Styrene on the properties of the Expandable Poly Styrene and simulation of its laboratory data via Artificial Neural Networks [Volume 5, Issue 2, 2021, Pages 105-116]
Ghiyami, Taha Study of the effect of operating parameters on the performance of acetylene hydrogenation reactors [Volume 5, Issue 2, 2021, Pages 91-104]
Gholizadeh-Ghale-Aziz, Moheyddin Synthesis and investigation of low band gap energy donor-acceptor polyaniline [Volume 5, Issue 3, 2021, Pages 39-55]
Goodarzi, Vahabodin Fabrication of nanocomposite scaffold based on bacterial cellulose/zinc oxide nanoparticles/polypyrrole with antibacterial and cytotoxicity assessment [Volume 5, Issue 2, 2021, Pages 37-50]
H
Haji Bagherian, Mehdi Preparation and study of physical and mechanical behavior of polylactic acid bionanocomposites reinforced with Cellulose Nanocrystal and silver nanoparticles [Volume 5, Issue 3, 2021, Pages 25-13]
Hanifehei, Marjan Modeling Viscosity of Ionic Liquids and Akanolamines Mixtures Using Peng-Robinson and Soave-Redlich-Kwong Equation of States with Friction Theory [Volume 5, Issue 4, 2021, Pages 39-54]
Hashemian, Saeedeh Control of flooding phenomena in vacuum distillation tray column using operational and laboratory parameters [Volume 5, Issue 2, 2021, Pages 51-63]
Hassanzadeh Nemati, Nahid Fabrication of nanocomposite scaffold based on bacterial cellulose/zinc oxide nanoparticles/polypyrrole with antibacterial and cytotoxicity assessment [Volume 5, Issue 2, 2021, Pages 37-50]
Hayatolgheibi, Hosein Simulation of Hydrogel Injection in Micro-Model and Prediction of Oil Recovery Factor [Volume 5, Issue 4, 2021, Pages 3-13]
Heydari, Sharif Fabrication of nanocomposite scaffold based on bacterial cellulose/zinc oxide nanoparticles/polypyrrole with antibacterial and cytotoxicity assessment [Volume 5, Issue 2, 2021, Pages 37-50]
Hosseini, Mir Ghasem Synthesis and investigation of low band gap energy donor-acceptor polyaniline [Volume 5, Issue 3, 2021, Pages 39-55]
I
Ilkhani, Ali Reza Control of flooding phenomena in vacuum distillation tray column using operational and laboratory parameters [Volume 5, Issue 2, 2021, Pages 51-63]
J
Jafari, dariush Modeling of a synthesis gas production reactor using Aspen plus [Volume 5, Issue 2, 2021, Pages 3-15]
Jafari, Mostafa Simulation and Techno-Economic analysis of Hydrotreating Process of Mazut [Volume 5, Issue 1, 2021, Pages 17-30]
Jalali tarshizi, Hossein Cationic PolyAcrylamide/Cellulose Nanofibril Polyelectrolytes Effect on Suspension and Network Properties of Packaging Recycled fibers [Volume 5, Issue 1, 2021, Pages 3-15]
K
Karami, Hamid The role of hierarchical Y zeolites on the catalyst performance of diesel Hydrodesulfurization Process [Volume 5, Issue 3, 2021, Pages 37-27]
KArimzadeh, ramin Investigation of Lignin-based activated carbon synthesis parameters on its structural properties [Volume 5, Issue 3, 2021, Pages 71-81]
Kaykha, Yasin Investigating the Effect of DBTDL Catalyst on Curing Kinetic of Polyurethane using Differential Scanning Calorimetry: HTPB/TDI vs. HTPB/IPDI [Volume 5, Issue 1, 2021, Pages 43-55]
Kazemeini, Mohammad The role of hierarchical Y zeolites on the catalyst performance of diesel Hydrodesulfurization Process [Volume 5, Issue 3, 2021, Pages 37-27]
Kebritchi, Abbas Investigating the Effect of DBTDL Catalyst on Curing Kinetic of Polyurethane using Differential Scanning Calorimetry: HTPB/TDI vs. HTPB/IPDI [Volume 5, Issue 1, 2021, Pages 43-55]
Kebritchi, Abbas Poly (Vinyl Ferrocene)/Hydroxyl terminated polybutadiene (PVF/HTPB) blend as a Catalyst: Preparation, Characterization and Comparison [Volume 5, Issue 4, 2021, Pages 79-90]
Khaksar Manshad, Abbas Concentration-Behavioral, Adsorption, Flooding, Relative Permeability Studies of Polymer Nanocomposite in Two Reservoir Lithologies [Volume 5, Issue 1, 2021, Pages 69-86]
Khalili-Garakani, Amirhossein Simulation and Techno-Economic analysis of Hydrotreating Process of Mazut [Volume 5, Issue 1, 2021, Pages 17-30]
L
Larimi, Afsanehsadat EDTA-functionalized Fe3O4@SiO2 magnetic nanoadsorbent for divalent cadmium removal from aqueous solutions [Volume 5, Issue 3, 2021, Pages 95-106]
M
Maleki, Artin Poly (Vinyl Ferrocene)/Hydroxyl terminated polybutadiene (PVF/HTPB) blend as a Catalyst: Preparation, Characterization and Comparison [Volume 5, Issue 4, 2021, Pages 79-90]
Maleki, Mahmoud Potential assessment of non-edible sources for biodiesel production in Iran [Volume 5, Issue 2, 2021, Pages 17-36]
Mehdi Mirabolghasemi, Seyed Preparation and study of physical and mechanical behavior of polylactic acid bionanocomposites reinforced with Cellulose Nanocrystal and silver nanoparticles [Volume 5, Issue 3, 2021, Pages 25-13]
Mehralizadeh, Amir Investigation of influence of the Styrene Butadiene Styrene on the properties of the Expandable Poly Styrene and simulation of its laboratory data via Artificial Neural Networks [Volume 5, Issue 2, 2021, Pages 105-116]
Mohammadi, Maryam Two-Step Synthesis of PolyCarboxylate Ether by Bulk and Solution Methods [Volume 5, Issue 2, 2021, Pages 79-90]
Mohammadian Semnani, Hamidreza Epoxy Modification by Polyurethane and Its Effects on Abrasion and Adhesion Properties [Volume 5, Issue 3, 2021, Pages 83-94]
Mohebifar, AMIN Optimization of mechanical properties of PP-polymer foam fabricated via extruder [Volume 5, Issue 1, 2021, Pages 105-120]
Mohseni Roudbari, Sina Potential assessment of non-edible sources for biodiesel production in Iran [Volume 5, Issue 2, 2021, Pages 17-36]
N
Najafi, Mohsen Preparation and study of physical and mechanical behavior of polylactic acid bionanocomposites reinforced with Cellulose Nanocrystal and silver nanoparticles [Volume 5, Issue 3, 2021, Pages 25-13]
Najjar, Reza Synthesis and investigation of low band gap energy donor-acceptor polyaniline [Volume 5, Issue 3, 2021, Pages 39-55]
P
Peyvand, Aminollah Temperature Changes in Oil Wells and Its Effect on Tubulars Stress Condition [Volume 5, Issue 3, 2021, Pages 12-3]
Pourkarim Dodangeh, Hossein Cationic PolyAcrylamide/Cellulose Nanofibril Polyelectrolytes Effect on Suspension and Network Properties of Packaging Recycled fibers [Volume 5, Issue 1, 2021, Pages 3-15]
R
Rajabi, Zahra The effect of 5-fluorouracil loaded albumin magnetic nanoparticles on viability and cell cycle of human breast cancer MCF-7 cell line [Volume 5, Issue 1, 2021, Pages 31-41]
Rashidzadeh, Mehdi The role of hierarchical Y zeolites on the catalyst performance of diesel Hydrodesulfurization Process [Volume 5, Issue 3, 2021, Pages 37-27]
Redaei, Alireza Two-Step Synthesis of PolyCarboxylate Ether by Bulk and Solution Methods [Volume 5, Issue 2, 2021, Pages 79-90]
Rudi, Hamidreza Cationic PolyAcrylamide/Cellulose Nanofibril Polyelectrolytes Effect on Suspension and Network Properties of Packaging Recycled fibers [Volume 5, Issue 1, 2021, Pages 3-15]
S
Saadati Ardestani, Nedasadat Determination of the solubility of anticancer drugs in supercritical carbon dioxide using empirical models and artificial neural network [Volume 5, Issue 4, 2021, Pages 15-37]
Sadat-Shojai, Mehdi Bioactive rod-like nanoparticles as novel filler for improving the properties of supramolecular polyester: synthesis and application [Volume 5, Issue 3, 2021, Pages 57-69]
Sadeghi, Jafar Study of the effect of operating parameters on the performance of acetylene hydrogenation reactors [Volume 5, Issue 2, 2021, Pages 91-104]
Sadeghian, Kimia Simulation of glycerol and biodiesel production process with numerical analysis and optimization of transesterification reactor by response surface method (RSM) [Volume 5, Issue 4, 2021, Pages 105-117]
Shahhosseini, shahrokh Simulation of glycerol and biodiesel production process with numerical analysis and optimization of transesterification reactor by response surface method (RSM) [Volume 5, Issue 4, 2021, Pages 105-117]
Shahraki, Farhad Study of the effect of operating parameters on the performance of acetylene hydrogenation reactors [Volume 5, Issue 2, 2021, Pages 91-104]
Shirazi Sarraf, Mohammad Javad Control of flooding phenomena in vacuum distillation tray column using operational and laboratory parameters [Volume 5, Issue 2, 2021, Pages 51-63]
Shiva, Mehdi Study of operating conditions of silica extraction from rice husk for Special use in rubber [Volume 5, Issue 2, 2021, Pages 65-77]
Shojaosadati, Seyed Abbas The effect of 5-fluorouracil loaded albumin magnetic nanoparticles on viability and cell cycle of human breast cancer MCF-7 cell line [Volume 5, Issue 1, 2021, Pages 31-41]
Soltanali, Saeed The role of hierarchical Y zeolites on the catalyst performance of diesel Hydrodesulfurization Process [Volume 5, Issue 3, 2021, Pages 37-27]
Soltanali, Saeed Applying Artificial Neural Network in Prediction behavior of alkylation of m-Cresol with isopropanol process and yield optimization by Bee Colony algorithm [Volume 5, Issue 4, 2021, Pages 69-78]
T
Tayyebi, Shokoufe Applying Artificial Neural Network in Prediction behavior of alkylation of m-Cresol with isopropanol process and yield optimization by Bee Colony algorithm [Volume 5, Issue 4, 2021, Pages 69-78]
V
Vaziri, Ali Fabrication of nanocomposite scaffold based on bacterial cellulose/zinc oxide nanoparticles/polypyrrole with antibacterial and cytotoxicity assessment [Volume 5, Issue 2, 2021, Pages 37-50]
Y
Yazdan panah, Mohamad reza Optimization of mechanical properties of PP-polymer foam fabricated via extruder [Volume 5, Issue 1, 2021, Pages 105-120]
Yeganeh Majd, Navid Determination of the solubility of anticancer drugs in supercritical carbon dioxide using empirical models and artificial neural network [Volume 5, Issue 4, 2021, Pages 15-37]
Z
Zahakifar, Fazel Solvent extraction of Ce(IV) from sulfuric acid solutions using Cyanex 921 and its mixtures with D2EHPA [Volume 5, Issue 1, 2021, Pages 87-103]
Zandi, As'ad Evaluation of Tack and Shear Strength of Pressure-Sensitive Adhesives Comprised of Polyurethane and Acrylic Copolymer Blend [Volume 5, Issue 4, 2021, Pages 55-67]
Zarei, Ghasem Potential assessment of non-edible sources for biodiesel production in Iran [Volume 5, Issue 2, 2021, Pages 17-36]
