AAbedi Bafrajerd, Abdollah Water Uptake Improvement in Hygiene Papers by NanoHydrogel Prepared from Chitosan/Nano silver/ PolyAcrylic Acid Composite [Volume 3, Issue 3, 2019, Pages 51-60]
Aalaie, Jamal Study of the rheological and compatibility behavior of sulfonated acrylamide copolymer/ wheat starch blends in aqueous media [Volume 3, Issue 2, 2019, Pages 15-27]
Abedini, Reza Effect of MIL-53 metal organic frameworks on performance of Pebax/PEG mixed matrix membrane for CO2/CH4 separation [Volume 3, Issue 3, 2019, Pages 69-79]
Abedini, Reza Investigation of performance of Pebax/ Poly(vinyl alcohol) blend membrane for carbon dioxide separation from nitrogen [Volume 3, Issue 4, 2020, Pages 57-71]
Adloo, Hadi The experimental study of the effect of polyacrylamide nanocomposite on reservoir rock and fluid properties in presence of formation water [Volume 3, Issue 2, 2019, Pages 29-41]
Ahmadi-Dehnoei, Ali Preparation and Improvement of Shear Strength of a Water-Redispersible Waterborne Acrylic Adhesive for Making Cellulose Joints [Volume 3, Issue 1, 2019, Pages 47-57]
Aliakbari, Maryam An Investigation on the Effect of Nylon 6,6 and Phenolic Resin on Mechanical and Thermal Properties of Epoxy Based Adhesives [Volume 3, Issue 3, 2019, Pages 81-92]
Alimohammadi, Saman Effect of Size of tire parts and Mazut Addition on Simultaneous Pyrolysis of Used Tire and Mazut [Volume 3, Issue 4, 2020, Pages 13-24]
Alizadeh, Gholamreza Effect of MIL-53 metal organic frameworks on performance of Pebax/PEG mixed matrix membrane for CO2/CH4 separation [Volume 3, Issue 3, 2019, Pages 69-79]
B
Babazadegan, Mohammad Ali Applying a system-oriented method for culture medium design to improve bio-ethanol production by synechocystis [Volume 3, Issue 2, 2019, Pages 55-67]
Baniasadi, Hossein Fabrication of PVA/Gr/TiO2 adsorbent and study of its application in removal of malachite green [Volume 3, Issue 1, 2019, Pages 59-68]
Bazgir, Saeed Study of the rheological and compatibility behavior of sulfonated acrylamide copolymer/ wheat starch blends in aqueous media [Volume 3, Issue 2, 2019, Pages 15-27]
Bijani, Abdolmotaleb Simulation and Optimization of Demercaptanization of Propane and Butane in South Pars Gas Refineries [Volume 3, Issue 2, 2019, Pages 3-14]
D
Daei Moghaddam, Mojtaba Simulation and Optimization of Demercaptanization of Propane and Butane in South Pars Gas Refineries [Volume 3, Issue 2, 2019, Pages 3-14]
E
Esfandyari, Morteza Voltage control of Two-chamber microbial fuel using classical PI and MPC controller [Volume 3, Issue 2, 2019, Pages 43-53]
Esmaeili-Faraj, Seyyed Hamid Simulation and Optimization of Demercaptanization of Propane and Butane in South Pars Gas Refineries [Volume 3, Issue 2, 2019, Pages 3-14]
Gandomkar, Asghar The experimental study of the effect of polyacrylamide nanocomposite on reservoir rock and fluid properties in presence of formation water [Volume 3, Issue 2, 2019, Pages 29-41]
Ghasemirad, Somayeh Preparation and Improvement of Shear Strength of a Water-Redispersible Waterborne Acrylic Adhesive for Making Cellulose Joints [Volume 3, Issue 1, 2019, Pages 47-57]
Ghorbani, Mohsen Investigation of performance of Pebax/ Poly(vinyl alcohol) blend membrane for carbon dioxide separation from nitrogen [Volume 3, Issue 4, 2020, Pages 57-71]
Goodarzi, Mohsen Removal of lead ions from aqueous solutions by adsorption operation: A review [Volume 3, Issue 1, 2019, Pages 3-28]
H
Hatamian-Zarmi, Ashrafalsadat Investigation of the Structural Properties of Dopamine-Loaded Poly(butyl cyanoacrylate) Nanosystem [Volume 3, Issue 4, 2020, Pages 73-83]
J
Jafari, Arezoo Experimental Investigation and Modeling of AOT Surfactant Adsorption on Carbonate Rock Particles [Volume 3, Issue 3, 2019, Pages 39-50]
Jafari, Arezou A Comparison Between Performance of Produced Biosurfactant and Conventional Chemical Surfactants in Enhanced Heavy Oil Recovery [Volume 3, Issue 1, 2019, Pages 69-80]
Jalali tarshizi, Hossein Water Uptake Improvement in Hygiene Papers by NanoHydrogel Prepared from Chitosan/Nano silver/ PolyAcrylic Acid Composite [Volume 3, Issue 3, 2019, Pages 51-60]
Javanmard, Neda The experimental study of the effect of polyacrylamide nanocomposite on reservoir rock and fluid properties in presence of formation water [Volume 3, Issue 2, 2019, Pages 29-41]
K
Karchoubi, Fatemeh A review on Nanocomposite Hydrogels: Rheology, Morphology, and Applications [Volume 3, Issue 3, 2019, Pages 3-38]
Karimdoost Yasuri, Amir Modeling the Application of Steam Produced by a Boiler-based Waste Incinerator to Disable Catalyst in the Production of Linear Polyethylene (LLDPE) in Lorestan Petrochemical Complex [Volume 3, Issue 1, 2019, Pages 81-92]
Karimzadeh, ramin Effect of Size of tire parts and Mazut Addition on Simultaneous Pyrolysis of Used Tire and Mazut [Volume 3, Issue 4, 2020, Pages 13-24]
Kebritchi, Abbas Effect of Curing Agent, Temperature, and Catalyst on Physical-Mechanical Properties of HTPB-Based Highly-filled Composite [Volume 3, Issue 4, 2020, Pages 25-42]
Keshtkar, Ali reza Fixedâbed column studies of U(VI) biosorption using Pseudomonas putida â Chitosan hybrid biosorbent [Volume 3, Issue 2, 2019, Pages 68-81]
Khademian, Einallah Removal of lead ions from aqueous solutions by adsorption operation: A review [Volume 3, Issue 1, 2019, Pages 3-28]
Kheirtalab, Mina Effect of MIL-53 metal organic frameworks on performance of Pebax/PEG mixed matrix membrane for CO2/CH4 separation [Volume 3, Issue 3, 2019, Pages 69-79]
Kheirtalab, Mina Investigation of performance of Pebax/ Poly(vinyl alcohol) blend membrane for carbon dioxide separation from nitrogen [Volume 3, Issue 4, 2020, Pages 57-71]
L
Lakhi, Mohammad Increase Heat Conductivity of Bladder and Calculate its Effect on Temperature Profile of the Tire in the Curing Process [Volume 3, Issue 3, 2019, Pages 93-105]
Lotfi, Marzieh Fabrication of PVA/Gr/TiO2 adsorbent and study of its application in removal of malachite green [Volume 3, Issue 1, 2019, Pages 59-68]
M
Manteghian, Mehrdad A Comparison Between Performance of Produced Biosurfactant and Conventional Chemical Surfactants in Enhanced Heavy Oil Recovery [Volume 3, Issue 1, 2019, Pages 69-80]
Mohammad Taghi Nejad, Hadi Effect of Curing Agent, Temperature, and Catalyst on Physical-Mechanical Properties of HTPB-Based Highly-filled Composite [Volume 3, Issue 4, 2020, Pages 25-42]
Molla-Abbasi, Payam Based Detector a of Development and Design for Composite CNT)/Acid Lactic(Poly on Compounds Organic Volatile of Detecti [Volume 3, Issue 4, 2020, Pages 43-56]
Mombini, Jahanbakhsh Effect of Curing Agent, Temperature, and Catalyst on Physical-Mechanical Properties of HTPB-Based Highly-filled Composite [Volume 3, Issue 4, 2020, Pages 25-42]
Motamedian, Ehsan Applying a system-oriented method for culture medium design to improve bio-ethanol production by synechocystis [Volume 3, Issue 2, 2019, Pages 55-67]
Mousavi, Seyed mohammad A Comparison Between Performance of Produced Biosurfactant and Conventional Chemical Surfactants in Enhanced Heavy Oil Recovery [Volume 3, Issue 1, 2019, Pages 69-80]
N
Nasiri, Hadi Synthesis and Characterization of CexZr1-xO2 using Supercritical Water [Volume 3, Issue 4, 2020, Pages 3-12]
Nayeri, Fatemeh The experimental study of the effect of polyacrylamide nanocomposite on reservoir rock and fluid properties in presence of formation water [Volume 3, Issue 2, 2019, Pages 29-41]
O
Ostovari, Abdolamir Study of the rheological and compatibility behavior of sulfonated acrylamide copolymer/ wheat starch blends in aqueous media [Volume 3, Issue 2, 2019, Pages 15-27]
P
Pahlevani, Hossein A review on Nanocomposite Hydrogels: Rheology, Morphology, and Applications [Volume 3, Issue 3, 2019, Pages 3-38]
R
Rahimpour, Ahmad Effect of MIL-53 metal organic frameworks on performance of Pebax/PEG mixed matrix membrane for CO2/CH4 separation [Volume 3, Issue 3, 2019, Pages 69-79]
Rahnama, Bahar Fabrication of PVA/Gr/TiO2 adsorbent and study of its application in removal of malachite green [Volume 3, Issue 1, 2019, Pages 59-68]
Salehi, Ehsan Removal of lead ions from aqueous solutions by adsorption operation: A review [Volume 3, Issue 1, 2019, Pages 3-28]
Sanaeepur, Hamidreza Removal of lead ions from aqueous solutions by adsorption operation: A review [Volume 3, Issue 1, 2019, Pages 3-28]
Sepehri, Sanam Study of the rheological and compatibility behavior of sulfonated acrylamide copolymer/ wheat starch blends in aqueous media [Volume 3, Issue 2, 2019, Pages 15-27]
Shahpasand, Koorosh Investigation of the Structural Properties of Dopamine-Loaded Poly(butyl cyanoacrylate) Nanosystem [Volume 3, Issue 4, 2020, Pages 73-83]
Sharif, Mehdi The experimental study of the effect of polyacrylamide nanocomposite on reservoir rock and fluid properties in presence of formation water [Volume 3, Issue 2, 2019, Pages 29-41]
Shidpoor, Reza Water Uptake Improvement in Hygiene Papers by NanoHydrogel Prepared from Chitosan/Nano silver/ PolyAcrylic Acid Composite [Volume 3, Issue 3, 2019, Pages 51-60]
Shiri, Reza Preparation and Improvement of Shear Strength of a Water-Redispersible Waterborne Acrylic Adhesive for Making Cellulose Joints [Volume 3, Issue 1, 2019, Pages 47-57]
Sohrabian, Majid An Investigation on the Effect of Nylon 6,6 and Phenolic Resin on Mechanical and Thermal Properties of Epoxy Based Adhesives [Volume 3, Issue 3, 2019, Pages 81-92]
Soleymanzadehb, Aboozar Experimental Investigation and Modeling of AOT Surfactant Adsorption on Carbonate Rock Particles [Volume 3, Issue 3, 2019, Pages 39-50]
V
Veiskaramia, Sepideh Experimental Investigation and Modeling of AOT Surfactant Adsorption on Carbonate Rock Particles [Volume 3, Issue 3, 2019, Pages 39-50]
