Abbasi, Mashhood Optimization of tear resistance and compression set at rubber spring based on EPDM/NR alloy [Volume 4, Issue 1, 2020, Pages 107-91]
Abbasi, Mashhood Effect of swelling on the electrical behavior of nitrile/graphite rubber composite and break down of graphite network [Volume 4, Issue 3, 2020, Pages 13-3]
Abbaspour, Seyed Foad Cr (VI) Adsorption Using synthesis Novel UIO-66-MnFe2O4-TiO2 Magnetic Nanoparticles by Experimental Design [Volume 4, Issue 4, 2021, Pages 33-48]
Abbaszadeh, Ali The Effects of Cooling Method on Final Mechanical and Thermal Properties of Polyethylene Tanks Manufactured by Rotational Molding [Volume 4, Issue 4, 2021, Pages 23-31]
Abdoljavadi, Alireza The Effects of Cooling Method on Final Mechanical and Thermal Properties of Polyethylene Tanks Manufactured by Rotational Molding [Volume 4, Issue 4, 2021, Pages 23-31]
Aghayari, Sedigheh Measuring the porosity of PA6 nanofibers prepared via hybrid electrospinning after the dissolution of PVA component and effect of some parameters on it [Volume 4, Issue 2, 2020, Pages 95-106]
Ahmadi, Vahid Preparation of Poly(dimethylsiloxane) Microparticles via a Co-flow Microfluidic Device and Investigation of Various Parameters Effect on Morphology [Volume 4, Issue 3, 2020, Pages 26-15]
Arabpour Roghabadi, Farzaneh Preparation of Poly(dimethylsiloxane) Microparticles via a Co-flow Microfluidic Device and Investigation of Various Parameters Effect on Morphology [Volume 4, Issue 3, 2020, Pages 26-15]
Asadi, Reza Cr (VI) Adsorption Using synthesis Novel UIO-66-MnFe2O4-TiO2 Magnetic Nanoparticles by Experimental Design [Volume 4, Issue 4, 2021, Pages 33-48]
B
Bahramian, Alireza Impact of Aqueous Phase Ion Type and Concentration on Calcite Surface Wettability and Acidic Oil-Brine IFT [Volume 4, Issue 2, 2020, Pages 19-34]
Baniasadi, Hossein Design, fabrication and characterization of electrospun wound dressing composed of polyvinyl alcohol/Aloe Vera [Volume 4, Issue 2, 2020, Pages 83-93]
D
Dabir, Bahram Modeling of asphaltene particle size distribution in well using DEM-CFD [Volume 4, Issue 2, 2020, Pages 69-82]
Darvish, Maryam Fixedâbed column studies of nitrate ion adsorption using modified montmorillonite adsorbent [Volume 4, Issue 4, 2021, Pages 89-105]
E
Ebadi Amooghin, Abtin Preparation of mixed matrix membranes containing nickel iron oxide nanoparticles for separation of carbon dioxide, nitrogen and methane [Volume 4, Issue 1, 2020, Pages 90-67]
Ebrahimi, Navid Design and optimization of metformin released from ZnO/Chitosan nanocomposite [Volume 4, Issue 3, 2020, Pages 42-27]
Enayati, Mohammad hossein Synthesis and characterizations of polyvinyl alcohol-graphite electrospun nanofibers [Volume 4, Issue 4, 2021, Pages 77-88]
Esfandiari, Nadia Experimental Study of Polyvinyl Acetate / Diamond Nanocomposites [Volume 4, Issue 1, 2020, Pages 118-109]
Esfandyari, Morteza Removal of heavy metal zinc from aqueous solution by the alga Gracilaria corticata [Volume 4, Issue 1, 2020, Pages 51-43]
Eslami, Fatemeh Statistical Modeling and Optimization of the Effective Parameters in Precipitation of Asphaltene from Vacuum Residue by Industrial Solvents [Volume 4, Issue 4, 2021, Pages 3-21]
Esmaeelzadeh, Zahra Measuring the porosity of PA6 nanofibers prepared via hybrid electrospinning after the dissolution of PVA component and effect of some parameters on it [Volume 4, Issue 2, 2020, Pages 95-106]
F
Feizi, Vafa Modeling of Carbon Dioxide Replacement in Methane Hydrate Structure [Volume 4, Issue 1, 2020, Pages 42-31]
Foroozan, Ali The Effects of Cooling Method on Final Mechanical and Thermal Properties of Polyethylene Tanks Manufactured by Rotational Molding [Volume 4, Issue 4, 2021, Pages 23-31]
G
Ghasemi, Ismaeil Investigation of the TPS Effect on the Biodegradability of Agricultural Mulches Based on PLA and LDPE [Volume 4, Issue 2, 2020, Pages 3-18]
Ghashghaie, Fatemeh Preparation of Poly(dimethylsiloxane) Microparticles via a Co-flow Microfluidic Device and Investigation of Various Parameters Effect on Morphology [Volume 4, Issue 3, 2020, Pages 26-15]
Golshan Ebrahimi, Nadereh Optimization of ternary blends based on poly (lactic acid) according to physical and biological properties [Volume 4, Issue 1, 2020, Pages 66-53]
Golshan Ebrahimi, Nadereh Comparison of rheological behavior of LDPE in linear and nonlinear viscoelastic flow and using Multimode Pom-Pom model for prediction of uniaxial elongational flow [Volume 4, Issue 4, 2021, Pages 49-56]
H
Hajipour, Mastaneh Impact of Aqueous Phase Ion Type and Concentration on Calcite Surface Wettability and Acidic Oil-Brine IFT [Volume 4, Issue 2, 2020, Pages 19-34]
Hakim, Shokoufeh The Effect of Magnesium Particles Size and Reaction Conditions on Morphology of the Synthesized Magnesium Ethoxide [Volume 4, Issue 3, 2020, Pages 111-97]
Hedayati Moghaddam, Amin Investigation of Optimum Condition of Saponin Extraction by Carbon Dioxide Super Critical Fluid and Solvent [Volume 4, Issue 4, 2021, Pages 67-76]
Hemmati, Azadeh Design, fabrication and characterization of electrospun wound dressing composed of polyvinyl alcohol/Aloe Vera [Volume 4, Issue 2, 2020, Pages 83-93]
Hosseini, Seyed Saeid Investigation the performance of Polysulfone/Neodymium Magnetic Mixed-Matrix Membranes for O2/N2 Separation [Volume 4, Issue 2, 2020, Pages 53-68]
J
Jalili, Kiyumars Preparation of Poly(dimethylsiloxane) Microparticles via a Co-flow Microfluidic Device and Investigation of Various Parameters Effect on Morphology [Volume 4, Issue 3, 2020, Pages 26-15]
K
Kalaee, Mohammadreza Optimization of anti- Corrosion of Epoxy/Zinc Phosphate and Nano Silica coating [Volume 4, Issue 2, 2020, Pages 35-51]
Kalantari, Saeed Preparation of mixed matrix membranes containing nickel iron oxide nanoparticles for separation of carbon dioxide, nitrogen and methane [Volume 4, Issue 1, 2020, Pages 90-67]
KALANTARI, BAHAREH Investigation on microstructure, morphology, and tensile properties of polypropylene/graphene nanoplatelets nanocomposite fiber in the presence of compatibilizer [Volume 4, Issue 1, 2020, Pages 30-13]
Karami, Amir Fuzzy Control of Semibatch Poly(ethylene terephthalate) Reactor Temperature based on Linguistic Rules [Volume 4, Issue 3, 2020, Pages 68-57]
Karbassi, Abdolreza Fixedâbed column studies of nitrate ion adsorption using modified montmorillonite adsorbent [Volume 4, Issue 4, 2021, Pages 89-105]
Karimi-Sabet, Javad Investigation the performance of Polysulfone/Neodymium Magnetic Mixed-Matrix Membranes for O2/N2 Separation [Volume 4, Issue 2, 2020, Pages 53-68]
Karimzadeh, Ramin Statistical Modeling and Optimization of the Effective Parameters in Precipitation of Asphaltene from Vacuum Residue by Industrial Solvents [Volume 4, Issue 4, 2021, Pages 3-21]
Khojastehpour, Mehdi Investigation of the TPS Effect on the Biodegradability of Agricultural Mulches Based on PLA and LDPE [Volume 4, Issue 2, 2020, Pages 3-18]
Khorasheh, Farhad Photocatalytic Reduction of Carbon dioxide to Renewable Methane using Titanium dioxide modified with Bismuth and Copper [Volume 4, Issue 3, 2020, Pages 55-43]
L
Larimi, Afsanehsadat Photocatalytic Reduction of Carbon dioxide to Renewable Methane using Titanium dioxide modified with Bismuth and Copper [Volume 4, Issue 3, 2020, Pages 55-43]
M
Mansourpour, Zahra Modeling of asphaltene particle size distribution in well using DEM-CFD [Volume 4, Issue 2, 2020, Pages 69-82]
Manteghian, Mehrdad Determination of nucleation and induction time of crystallization of amoxicillin nanoparticles in the presence of surface active agents [Volume 4, Issue 1, 2020, Pages 12-3]
Mirzababaei, Siamak Optimization of anti- Corrosion of Epoxy/Zinc Phosphate and Nano Silica coating [Volume 4, Issue 2, 2020, Pages 35-51]
Mohaddes Mojtahedi, Mohammad Reza Investigation on microstructure, morphology, and tensile properties of polypropylene/graphene nanoplatelets nanocomposite fiber in the presence of compatibilizer [Volume 4, Issue 1, 2020, Pages 30-13]
Mohaddes Mojtahedi, Mohammad Reza Measuring the porosity of PA6 nanofibers prepared via hybrid electrospinning after the dissolution of PVA component and effect of some parameters on it [Volume 4, Issue 2, 2020, Pages 95-106]
Mohebbi, Vahid Modeling of Carbon Dioxide Replacement in Methane Hydrate Structure [Volume 4, Issue 1, 2020, Pages 42-31]
Moradi, Mohsen Photocatalytic Reduction of Carbon dioxide to Renewable Methane using Titanium dioxide modified with Bismuth and Copper [Volume 4, Issue 3, 2020, Pages 55-43]
Moradi Dehaghi, Shahram Fixedâbed column studies of nitrate ion adsorption using modified montmorillonite adsorbent [Volume 4, Issue 4, 2021, Pages 89-105]
Motazedian, Esmail Experimental Study of Polyvinyl Acetate / Diamond Nanocomposites [Volume 4, Issue 1, 2020, Pages 118-109]
N
Nasehi, Pedram Cr (VI) Adsorption Using synthesis Novel UIO-66-MnFe2O4-TiO2 Magnetic Nanoparticles by Experimental Design [Volume 4, Issue 4, 2021, Pages 33-48]
NEKOOMANESH, MEHDI The Effect of Magnesium Particles Size and Reaction Conditions on Morphology of the Synthesized Magnesium Ethoxide [Volume 4, Issue 3, 2020, Pages 111-97]
Nematollahi, Reza Photocatalytic Reduction of Carbon dioxide to Renewable Methane using Titanium dioxide modified with Bismuth and Copper [Volume 4, Issue 3, 2020, Pages 55-43]
O
Omidkhah, Mohammadreza Preparation of mixed matrix membranes containing nickel iron oxide nanoparticles for separation of carbon dioxide, nitrogen and methane [Volume 4, Issue 1, 2020, Pages 90-67]
P
Pirayeshfar, Soheil The Effect of Magnesium Particles Size and Reaction Conditions on Morphology of the Synthesized Magnesium Ethoxide [Volume 4, Issue 3, 2020, Pages 111-97]
Pourhossainy, Mohammad Reza Optimization of tear resistance and compression set at rubber spring based on EPDM/NR alloy [Volume 4, Issue 1, 2020, Pages 107-91]
Pourhossainy, Mohammad Reza Effect of swelling on the electrical behavior of nitrile/graphite rubber composite and break down of graphite network [Volume 4, Issue 3, 2020, Pages 13-3]
R
Rafizadeh, Mehdi Fuzzy Control of Semibatch Poly(ethylene terephthalate) Reactor Temperature based on Linguistic Rules [Volume 4, Issue 3, 2020, Pages 68-57]
Raveshiyan, Saba Investigation the performance of Polysulfone/Neodymium Magnetic Mixed-Matrix Membranes for O2/N2 Separation [Volume 4, Issue 2, 2020, Pages 53-68]
Razavizadeh, Mahmoud Optimization of tear resistance and compression set at rubber spring based on EPDM/NR alloy [Volume 4, Issue 1, 2020, Pages 107-91]
Razavizadeh, Mahmoud Effect of swelling on the electrical behavior of nitrile/graphite rubber composite and break down of graphite network [Volume 4, Issue 3, 2020, Pages 13-3]
S
Saadat Tagharoodi, Milad Optimization of tear resistance and compression set at rubber spring based on EPDM/NR alloy [Volume 4, Issue 1, 2020, Pages 107-91]
Saadat Tagharoodi, Milad Effect of swelling on the electrical behavior of nitrile/graphite rubber composite and break down of graphite network [Volume 4, Issue 3, 2020, Pages 13-3]
Saei moghaddam, Mojtaba Investigation on Using Amine Split Flow to Reduce Maximum Temperature of the Fajr-Jam Refinery Absorption Tower for Control Corrosion Rate [Volume 4, Issue 2, 2020, Pages 107-117]
Saei moghaddam, Mojtaba Cr (VI) Adsorption Using synthesis Novel UIO-66-MnFe2O4-TiO2 Magnetic Nanoparticles by Experimental Design [Volume 4, Issue 4, 2021, Pages 33-48]
Sargolzaei, Javad Investigation of Optimum Condition of Saponin Extraction by Carbon Dioxide Super Critical Fluid and Solvent [Volume 4, Issue 4, 2021, Pages 67-76]
Semnani Rahbar, Rouhollah Investigation on microstructure, morphology, and tensile properties of polypropylene/graphene nanoplatelets nanocomposite fiber in the presence of compatibilizer [Volume 4, Issue 1, 2020, Pages 30-13]
Shahabi Ghoyonloe, Mohammad Investigation of the TPS Effect on the Biodegradability of Agricultural Mulches Based on PLA and LDPE [Volume 4, Issue 2, 2020, Pages 3-18]
Shahrousvand, Mohsen Optimization of the synthesis of poly (acrylic acid)/xanthan semi-IPNs using the response surface methodology [Volume 4, Issue 3, 2020, Pages 95-81]
Shahsavarzadeh jangi, Pardis Investigation of Optimum Condition of Saponin Extraction by Carbon Dioxide Super Critical Fluid and Solvent [Volume 4, Issue 4, 2021, Pages 67-76]
Shiva, Mehdi Preparation of silica powder from rice husk by thermal treatment and comparison of its performance with commercial silica in blend of passenger radial tire belt [Volume 4, Issue 3, 2020, Pages 80-69]
T
Taghavi, Lobat Fixedâbed column studies of nitrate ion adsorption using modified montmorillonite adsorbent [Volume 4, Issue 4, 2021, Pages 89-105]
Tavakoli Targhi, Fatemeh Design, fabrication and characterization of electrospun wound dressing composed of polyvinyl alcohol/Aloe Vera [Volume 4, Issue 2, 2020, Pages 83-93]
Teymoori Tafazol, Hosein The Effects of Cooling Method on Final Mechanical and Thermal Properties of Polyethylene Tanks Manufactured by Rotational Molding [Volume 4, Issue 4, 2021, Pages 23-31]
Z
Zamanpour, Sepehr Impact of Aqueous Phase Ion Type and Concentration on Calcite Surface Wettability and Acidic Oil-Brine IFT [Volume 4, Issue 2, 2020, Pages 19-34]
Zare Aliabadi, Hasan Investigation on Using Amine Split Flow to Reduce Maximum Temperature of the Fajr-Jam Refinery Absorption Tower for Control Corrosion Rate [Volume 4, Issue 2, 2020, Pages 107-117]
Ziatabar, Seysd Ali Preparation of silica powder from rice husk by thermal treatment and comparison of its performance with commercial silica in blend of passenger radial tire belt [Volume 4, Issue 3, 2020, Pages 80-69]
