Volume 6, Issue 3 (2022)
IQBQ 2022, 6(3): 3-18 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Gharehdashli A, mortazavi S, Rashidi H. Investigation the photo-degradation of low-density polyethylene containing pro-oxidant and photo-catalyst. IQBQ 2022; 6 (3) :3-18
URL: http://arcpe.modares.ac.ir/article-38-62376-en.html
URL: http://arcpe.modares.ac.ir/article-38-62376-en.html
1- Azad university
2- assistant professor ,afrsb6@gmail.com
2- assistant professor ,
Abstract: (1617 Views)
Abstract
Research subject: Low biodegradation rate of plastics, especially different grades of the polyethylene leads to many environmental problems. To reduce these effects, pro-oxidant added to the polyethylene to increase the photo-degradation and subsequently the bio-degradation rate of the polymer matrix. Besides the pro-oxidant, it seems that the photocatalysts can affect on the photo-degradation of the polyethylene and the subject of this study is to examine this idea.
Research approach: Photodegradable films of LDPE were prepared by melt blending of the polymer with cadmium selenide (CdSe) and trisilver phosphate (Ag3PO4) as photo-catalysts and manganese stearate as pro-oxidant. The samples were irradiated with visible and ultra-violet light. Scanning electron microscopy (SEM), dynamic mechanical thermal analysis (DMTA), differential scanning calorimetry (DSC) and viscometry measurements were used to investigate the microstructure of the films.
Main results: FTIR spectra indicated to increment of the carbonyl index (CI) and vinyl index (VI) of the samples with photo-catalysts. In addition, SEM imaged confirmed higher and more homogeneous photo-degradation for these samples in comparison with other ones. Also, the dynamic-mechanical-thermal analysis showed that the polyethylene samples without the additives had higher modulus compared to other samples. However, the crystallinity of the samples with photo-catalysts increased due to nucleating agent effects of their particles. The viscosity of the samples containing the photo-catalysts and pro-oxidants decreased significantly and the modeling results showed that this decrement was due to the polymer chain degradation and reduction of their molecular weights. In general, the results showed that the combination of the photo-catalysts and the pro-oxidants had synergistic effect on the photo-degradation of the LDPE and accelerates its degradation process a lot more in comparison when only the pro-oxidant was used.
Research subject: Low biodegradation rate of plastics, especially different grades of the polyethylene leads to many environmental problems. To reduce these effects, pro-oxidant added to the polyethylene to increase the photo-degradation and subsequently the bio-degradation rate of the polymer matrix. Besides the pro-oxidant, it seems that the photocatalysts can affect on the photo-degradation of the polyethylene and the subject of this study is to examine this idea.
Research approach: Photodegradable films of LDPE were prepared by melt blending of the polymer with cadmium selenide (CdSe) and trisilver phosphate (Ag3PO4) as photo-catalysts and manganese stearate as pro-oxidant. The samples were irradiated with visible and ultra-violet light. Scanning electron microscopy (SEM), dynamic mechanical thermal analysis (DMTA), differential scanning calorimetry (DSC) and viscometry measurements were used to investigate the microstructure of the films.
Main results: FTIR spectra indicated to increment of the carbonyl index (CI) and vinyl index (VI) of the samples with photo-catalysts. In addition, SEM imaged confirmed higher and more homogeneous photo-degradation for these samples in comparison with other ones. Also, the dynamic-mechanical-thermal analysis showed that the polyethylene samples without the additives had higher modulus compared to other samples. However, the crystallinity of the samples with photo-catalysts increased due to nucleating agent effects of their particles. The viscosity of the samples containing the photo-catalysts and pro-oxidants decreased significantly and the modeling results showed that this decrement was due to the polymer chain degradation and reduction of their molecular weights. In general, the results showed that the combination of the photo-catalysts and the pro-oxidants had synergistic effect on the photo-degradation of the LDPE and accelerates its degradation process a lot more in comparison when only the pro-oxidant was used.
Article Type: Original Research |
Subject:
Composite
Received: 2022/06/21 | Accepted: 2023/02/20 | Published: 2023/07/1
Received: 2022/06/21 | Accepted: 2023/02/20 | Published: 2023/07/1
Send email to the article author
| Rights and permissions | |
 |
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |