Volume 3, Issue 2 (2019)                   IQBQ 2019, 3(2): 43-53 | Back to browse issues page

XML Persian Abstract Print

Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Esfandyari M, fanaei M A. Voltage control of Two-chamber microbial fuel using classical PI and MPC controller. IQBQ 2019; 3 (2) :43-53
URL: http://arcpe.modares.ac.ir/article-38-29973-en.html
1- Department of chemical engineering, University of Bojnord, Bojnord, Iran , M.esfandyari@ub.ac.ir
2- Department of chemical engineering, Ferdowsi University of Mashhad, Mashhad, Iran
Abstract:   (5919 Views)
In this paper, for control Voltage of two chamber Microbial fuel cell, two-type PI controller and MPC controller are used. For this purpose, two compartments of the model presented by Esfandyari  et al. [1, 2] have been used to model the microbial fuel cell. Then, based on this model, a classic PI controller based on the internal model and a MPC controller was designed and implemented. Based on the designed controllers, it was adjusted by adjusting the flow rate of the substrate to changes usually introduced in turbulence, such as the concentration of input to the substrate, or the effect of the uncertainty in the parameters of the process model, such as rmax and Ks. The results show that the MPC controller has a better performance compared to the classic PI controller.
Full-Text [PDF 568 kb]   (2228 Downloads)    
Article Type: Original Research | Subject: Fuel Cell
Received: 2019/01/30 | Accepted: 2019/09/21 | Published: 2019/09/21

Add your comments about this article : Your username or Email:

Send email to the article author

Rights and permissions
Creative Commons License This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.