Preparation and study of physical and mechanical behavior of polylactic acid bionanocomposites reinforced with Cellulose Nanocrystal and silver nanoparticles

Mehdi Mirabolghasemi, Seyed; Najafi, Mohsen; Azizi, Alireza; Haji Bagherian, Mehdi

Preparation and study of physical and mechanical behavior of polylactic acid bionanocomposites reinforced with Cellulose Nanocrystal and silver nanoparticles

Document Type : Original Research

Authors

S. Mehdi Mirabolghasemi

M. Najafi

A. Azizi

M. Haji Bagherian

Department of Polymer Engineering, Faculty of Engineering, Qom University of Technology

Abstract

Research subject: Biodegradable compounds with high mechanical and thermal properties are one of the intersting research topics. Polylactic acid is an aliphatic polyester with high biodegradability and flexibility. It, however, suffers from several weaknesses such as high permeability to water vapor and gases, low glass transition temperature, poor thermal stability and brittleness which can be improved by the incorporation of nano-scale fillers giving rise to bionanocomposites. The aim of this study was to investigate the effect of the simultaneous incorporation of cellulose nanocrystals and nanosilver on the mechanical, thermal and water vapor permeability behavior of polylactic acid-based films.

Research approach: Polylactic acid films and their bionanocomposites containing different levels of cellulose nanocrystals (0.01, 0.03 and 0.05 g) and nanosilver (0.01 g) were prepared by solution casting method. To improve compatibility and miscibility of the polymer, cellulose nanocrystals were reacted with acetic anhydride and modified. FTIR spectroscopy, tensile test, thermal properties (DSC), migration test and antibacterial properties were used to study the properties of the samples. The water vapor permeability of the samples were also measured.

Main results: The addition of cellulose nanocrystals, increased the glass transition temperature (T_g) and melting point (T_m) of the samples. The presence of cellulose nanocrystals increased the tensile strength and modulus of elasticity of the bionanocomposite relative to pure polylactic acid. With the addition of cellulose nanocrystals, permeability was reduced by about 25%. As the amount of cellulose nanocrystals increased, the swelling and water absorption of the samples increased significantly. The migration rate of the samples also decreased after the addition of nanocellulose.

Keywords

Bionanocomposites

Cellulose nanocrystals

Nanosilver

Polylactic acid

Antibacterial properties

Subjects

nano-composite

1. Takkalkar, P., Ganapathi, M., Dekiwadia, C., Nizamuddin, S., Griffin, G., & Kao, N., Preparation of Square-Shaped Starch Nanocrystals/Polylactic Acid Based Bio-nanocomposites: Morphological, Structural, Thermal and Rheological Properties, Waste and Biomass Valorization, 1-15, 2018.
2. Sorrentino, A., Gorrasi, G., & Vittoria, V., Potential perspectives of bio-nanocomposites for food packaging applications, Trends in Food Science & Technology, 18(2), 84-95, 2007.
3. Satti, S. M., Shah, A. A., Marsh, T. L., & Auras, R. , Biodegradation of Poly (lactic acid) in Soil Microcosms at Ambient Temperature: Evaluation of Natural Attenuation, Bio-augmentation and Bio-stimulation, Journal of Polymers and the Environment, 1-10, 2018.
4. Raquez, J. M., Habibi, Y., Murariu, M., & Dubois, P., Polylactide (PLA)-based nanocomposites, Progress in Polymer Science, 38(10-11), 1504-1542, 2013.
5. Shayan, M., Azizi, H., Ghasemi, I., Karrabi, M., Influence of modified starch and nanoclay particles on crystallization and thermal degradation properties of cross-linked poly(lactic acid), Journal of Polymer Research, 26:238, 1-12, 2019.
6. Manafi, P., Ghasemi, I., Karrabi, M., Azizi, H., Manafi, M., Crystallization and Morphology of Nanocomposites Based on Poly(lactic acid)/Graphene Nanoplatelets: Effect of Nanoparticles Functionalization, Iranian Journal of Polymer Science and Technology, 27(5), 383-394, 2015.
7. Sorrentino, A., Gorrasi, G., & Vittoria, V., Potential perspectives of bio-nanocomposites for food packaging applications, Trends in Food Science & Technology, 18(2), 84-95, 2007.‏
8. Choudalakis, G., & Gotsis, A. D., Permeability of polymer/clay nanocomposites: a review, European polymer journal, 45(4), 967-984, 2009.
9. Bhat, A. H., Dasan, Y. K., Khan, I., Soleimani, H., & Usmani, A., Application of nanocrystalline cellulose: Processing and biomedical applications, Cellulose-Reinforced Nanofibre Composites, 215-240, 2017.
10. Cunha, A. G., & Gandini, A. , Turning polysaccharides into hydrophobic materials: a critical review. Part 1. Cellulose, Cellulose, 17(5), 875-889, 2010.
11. Matsumura, H., Sugiyama, J., & Glasser, W. G., Cellulosic nanocomposites. I. Thermally deformable cellulose hexanoates from heterogeneous reaction, Journal of Applied Polymer Science, 78(13), 2242-2253, 2000.
12. Gousse, C., Chanzy, H., Cerrada, M. L., & Fleury, E., Surface silylation of cellulose microfibrils: preparation and rheological properties, Polymer, 45(5), 1569-1575, 2004.
13. Almasi, H., Ghanbarzadeh, B., Dehghannia, J., Entezami, A., Khosrowshahi Asl, A., Studying the effect of modified cellulose nanofibers on the functional properties of poly (lactic acid) based biodegradable packaging, Journal of Research and Innovation in Food Science and Technology, 2(3), 205-218, 2013.
14. I. Moran, J., N. Ludueña, L., Phuong, V. T., Cinelli, P., Lazzeri, A. & A. Alvarez, V., Processing Routes for the Preparation of Poly(lactic acid)/Cellulose- Nanowhisker Nanocomposites for Packaging Applications, Polymers & Polymer Composites, 24(5), 341-346, 2016.
15. Bhiogade, A. & Kannan, M., Studies on thermal and degradation kinetics of cellulose micro/nanoparticle filled polylactic acid (PLA) based nanocomposites, Polymers & Polymer Composites, 29, 1-14, 2021.
16. Lin, N., Huang, J., Chang, P. R., Feng, J., & Yu, J., Surface acetylation of cellulose nanocrystal and its reinforcing function in poly (lactic acid), Carbohydrate Polymers, 83(4), 1834-1842, 2011.
17. Xu, C., Chen, J., Wu, D., Chen, Y., Lv, Q., & Wang, M., Polylactide/acetylated nanocrystalline cellulose composites preparedby a continuous route: A phase interface-property relation study, Carbohydrate polymers, 146, 58-66, 2016.
18. Hossain, K. M. Z., Ahmed, I., Parsons, A. J., Scotchford, C. A., Walker, G. S., Thielemans, W. & Rudd, C. D., Physico-chemical and mechanical properties of nanocomposites prepared using cellulose nanowhiskers and poly (lactic acid), Journal of Materials Science, 47(6), 2675-2686, 2012.
19. Paula, E. L. D., Mano, V., Duek, E. A. R. & Pereira, F. V., Hydrolytic degradation behavior of PLLA nanocomposites reinforced with modified cellulose nanocrystals, Química Nova, 38(8), 1014-1020, 2015.
20. KORD, B. and ROOHANI, M., THERMAL PROPERTIES AND FIRE BEHAVIOR OF PLA NANOCOMPOSITE FILMS, JOURNAL OF WOOD AND FOREST SCIENCE AND TECHNOLOGY, 23, 185-201, 2016.
21. Fortunati, E., Armentano, I., Zhou, Q., Iannoni, A., Saino, E., Visai, L. & Kenny, J. M. , Multifunctional bionanocomposite films of poly (lactic acid), cellulose nanocrystals and silver nanoparticles. Carbohydrate polymers, 87(2), 1596-1605, 2012.
22. Jonoobi, M., Mathew, A. P., Abdi, M. M., Makinejad, M. D. & Oksman, K., A comparison of modified and unmodified cellulose nanofiber reinforced polylactic acid (PLA) prepared by twin screw extrusion, Journal of Polymers and the Environment, 20(4), 991-997, 2012.
23. Kord, B., Jari, E., Najafi, A., & Tazakorrezaie, V., Effect of nanoclay on the decay resistance and physicomechanical properties of natural fiber-reinforced plastic composites against white-rot fungi (Trametes versicolor), Journal of Thermoplastic Composite Materials, 27(8), 1085-1096, 2014.
24. Roohani, M., Habibi, Y., Belgacem, N. M., Ebrahim, G., Karimi, A. N. & Dufresne, A., Cellulose whiskers reinforced polyvinyl alcohol copolymers nanocomposites, European polymer journal, 44(8), 2489-2498, 2008.
25. Sanchez-Garcia, M. D., Gimenez, E., Lagaron J. M., Development and characterization of novel nanobiocomposites of bacterial poly(3- hydroxybutirate), layered silicates and poly(e-caprolactone), Journal of Applied Polymer Science, 108, 2787-2801, 2008.
26. Sanchez-Garcia, M. D., Gimenez, E., Lagaron, J. M., Morphology and barrier properties of solvent cast composites of thermoplastic biopolymers and purified cellulose fibers, Carbohydrate Polymers, 71, 235-244, 2008.
27. Paralikar, S. A., Simonsen, J., & Lombardi, J., Poly (vinyl alcohol)/cellulose nanocrystal barrier membranes, Journal of Membrane Science, 320(1-2), 248-258, 2008.
28. De Rodriguez, N. L. G., Thielemans, W., & Dufresne, A., Sisal cellulose whiskers reinforced polyvinyl acetate nanocomposites, Cellulose, 13(3), 261-270, 2006.
29. Yew, G. H., Yusof, A. M., Ishak, Z. M., & Ishiaku, U. S., Water absorption and enzymatic degradation of poly (lactic acid)/rice starch composites, Polymer Degradation and Stability, 90(3), 488-500, 2005.
30. Singh, G., Kaur, N., Bhunia, H., Bajpai, P. K., & Mandal, U. K., Degradation behaviors of linear low‐density polyethylene and poly (L‐lactic acid) blends, Journal of Applied Polymer Science, 124(3), 1993-1998, 2012.
31. Fortunati, E., Peltzer, M., Armentano, I., Torre, L., Jiménez, A., & Kenny, J. M., Effects of modified cellulose nanocrystals on the barrier and migration properties of PLA nano-biocomposites, Carbohydrate polymers, 90(2), 948-956, 2012.
32. Li, S. M., Jia, N., Ma, M. G., Zhang, Z., Liu, Q. H., & Sun, R. C., Cellulose–silver nanocomposites: Microwave-assisted synthesis, characterization, their thermal stability, and antimicrobial property, Carbohydrate polymers, 86(2), 441-447, 2011.