طراحی، ساخت و بررسی خواص زخم‌پوش الکتروریسی شده متشکل از پلی‌وینیل‌الکل/آلوئه‌ورا

نوع مقاله : پژوهشی اصیل

نویسندگان

دانشگاه آزاد اسلامی واحد علوم و تحقیقات، تهران-ایران

چکیده
موضوع تحقیق: یکی از روش‌های مهم در درمان زخم‌های پوستی استفاده از زخم‌پوش است. اخیراً استفاده از زخم‌پوش‌های پایه پلیمری بسیار رواج پیدا کرده است. در این راستا، استفاده از پلیمرهای طبیعی در ساخت زخم‌پوش‌ها اهمیت ویژه‌ای یافته است. هدف از پژوهش حاضر طراحی و ساخت نوعی زخم‌پوش متشکل از پلی‌وینیل‌الکل/آلوئه‌ورا با قابلیت ترمیم زخم‌های پوستی است.

روش تحقیق: برای ساخت نمونه‌ها از روش الکتروریسی استفاده شد. ابتدا ژل آلوئه‌ورا استخراج، خالص‌سازی و به روش خشک‌کردن انجمادی به پودر تبدیل شد. در تمامی نمونه‌ها درصد وزنی مجموع پلی‌وینیل‌الکل و پودر آلوئه‌ورا ثابت و معادل 8% وزنی در نظر گرفته شد. این مقدار به صورت تجربی، با سعی و خطا و باتوجه به کیفیت الیاف تولیدی انتخاب گردید. نمونه‌هایی شامل مقادیر مختلف از پلی‌وینیل‌الکل و آلوئه‌ورا ساخته شدند و ساختار، استحکام کششی، تورم‌پذیری در محیط آبی، قابلیت تخریب‌پذیری و خاصیت ضدمیکروبی آن‌ها مورد بررسی قرار گرفت.

نتایج اصلی: نتایج نشان داد الیاف با آرایش تصادفی و قطر یکنواخت بدون قطره‌ریزی تولید شدند. قطر الیاف با افزایش سهم آلوئه‌ورا افزایش یافت. این رفتار به افزایش ویسکوزیته محلول در حضور آلوئه‌ورا نسبت داده شد. با افزایش سهم آلوئه‌ورا در نمونه‌ها استحکام کششی کاهش ولی درصد ازدیاد طول افزایش یافت. رفتار تورمی نمونه‌ها با اندازه‌گیری افزایش وزن آنها در محیطی مشابه با pH سطح پوست مورد بررسی قرار گرفت و مشخص شد که حضور آلوئه‌ورا خاصیت آب‌دوستی را افزایش می‌دهد. خاصیت ضدمیکروبی نمونه‌ها در مقابل دو باکتری گرم مثبت استافیلوکوکوس آرئوس و گرم منفی سودوموناس آئروژینوزا ‌با استفاده از روش دیسک انتشار بررسی شد و مشخص گردید حضور آلوئه‌ورا در نمونه‌ها خاصیت ضدمیکروبی نسبت به سودوموناس آئروژینوزا ایجاد کرده است. در نهایت یافته های این پژوهش ظرفیت استفاده از ترکیب پلی‌وینیل‌الکل/آلوئه‌ورا برای تولید زخم‌پوش الکتروریسی شده را تأیید می‌کند.

کلیدواژه‌ها

موضوعات


عنوان مقاله English

Design, fabrication and characterization of electrospun wound dressing composed of polyvinyl alcohol/Aloe Vera

نویسندگان English

Fatemeh Tavakoli Targhi
Hossein Baniasadi
Azadeh Hemmati
Science and Research Branch, Islamic Azad University, Tehran, Iran
چکیده English

Research Subject: One of the important methods in the treatment of skin wounds is the use of wound dressings. Recently, the use of polymer-based wound dressings has become increasingly common. The use of natural polymers is very important in wound dressings. The aim of the present study is to design and manufacture a polyvinyl alcohol/aloe vera wound dressing with the capability of healing skin wounds.

Research Approach: The electrospinning method was applied to prepare the samples. Aloe vera gel was first extracted, purified, and powdered by freeze-drying. In all samples, the amount of polyvinyl alcohol and aloe vera powder was fixed at 8 wt.%. This value was selected empirically based on the quality of the produced fibers. Different samples including different amounts of polyvinyl alcohol and aloe vera were produced and their properties including morphology, tensile strength, swelling, degradability, and antimicrobial properties were investigated.

Main Results: The results showed that the dropless random oriented fibers with uniform diameter were produced. The diameter increased with increasing aloe vera contribution, which was attributed to an increase in viscosity due to the presence of aloe vera. With increasing aloe vera contribution in the samples, tensile strength decreased and the elongation percentage increased. The swelling behavior of the specimens was evaluated by measuring the weight of the specimens in a simulated skin environment and the results showed that the presence of aloe vera increased the hydrophilic properties of the specimens. Antimicrobial activity of the samples against two gram-positive Staphylococcus aureus and Gram-negative Pseudomonas aeruginosa was investigated using the disk diffusion method and it was found that the presence of Aloe vera in the samples brought antimicrobial activity against Pseudomonas aeruginosa. Finally, the findings of this study confirm the feasibility of using polyvinyl alcohol /aloe vera for the production of the electrospun wound dressing.

کلیدواژه‌ها English

Wound Dressing
Electrospinning
Polyvinyl alcohol
Aloe vera
Antibacterial Property
[1] P. Zahedi, I. Rezaeian, S.O. Ranaei Siadat, S.H. Jafari, P. Supaphol, A Review on Wound Dressings with an Emphasis on Electrospun Nanofibrous Polymeric Bandages, Polymers for Advanced Technologies, 21.2, 77-95, 2010.
[2] H.Y. Kim, H.N. Kim, S.J. Lee, J.E. Song, S.Y. Kwon, J.W. Chung, D. Lee, G. Khang, Effect of Pore Sizes of PLGA Scaffolds on Mechanical Properties and Cell Behavior for Nucleus Pulposus Regeneration In Vivo, Tissue Engineering and Regenerative Medicine, 11, 1-8, 2014.
[3] S. Khoshgozaran Abrasa, M.H. Azizi, Z. Hamidyan, N. Bagheripoor Fallah, Mechanical, Physicochemical and Color Properties of Chitosan Based-Films as a Function of Aloe Vera Gel Incorporation, Carbohydrate Polymers, 87, 3, 2058-2062, 2012.
[4] K. Tarun, N. Gobi, Calcium Alginate/PVA Blended Nanofiber Matrix for Wound Dressing, Indian Journal of Fibre & Textile Research 37, 127-132, 2012.
[5] A Cay, M. Miraftab, E.P.A Kumbasar, Characterization and Swelling Performance of Physically Stabilized Electrospun Poly (vinyl alcohol)/Chitosan Nanofibers, European Polymer Journal, 61, 253-262, 2014.
[6] H. Zheng, Y. Du, J. Yu, R. Huang, L. Zhang, Preparation and characterization of chitosan/poly (vinyl alcohol) blend fibers, Applied Polymer Science, 13, 2558-2565, 2001.
[7] C. Birck1, S. Degoutin, N. Tabary, V. Miri, M. Bacquet, New Crosslinked Cast Films Based on Poly(vinyl alcohol): Preparation and Physico-chemical Properties, eXPRESS Polymer Letters 8, 941-952, 2014.
[8] A. Doustgani, Optimization of Mechanical and Structural Properties of PVA Nanofibers, Journal of Industrial Textiles, 46, 901, 2015.
[9] S.N. Alhosseini, F. Moztarzadeh, M. Mozafari, S. Asgari, M. Dodel, A. Samadikuchaksaraei, S. Kargozar, N. Jalali, Synthesis and characterization of electrospun polyvinyl alcohol nanofibrous scaffolds modified by blending with chitosan for neural tissue engineering, International Journal of Nanomedicine, 7, 25-34, 2012.
[10] A. Ray, S.M. Aswatha, An analysis of the influence of growth periods on physical appearance and acemannan and elemental distribution of Aloe vera L. gel, Acta Biomaterialia, 54, 2-7, 2013.