Volume 6, Issue 2 (2022)                   IQBQ 2022, 6(2): 69-79 | Back to browse issues page

XML Persian Abstract Print


Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Shahsavari S, jamshidi A, kazemi A, azizinezhad F, farahmand ghavi F. Performance assessment of the hybrid nanofluid mixture of iron oxide nanoparticles and graphene nanosheets in the elimination of CO2 from the air, using a venturi scrubber. IQBQ 2022; 6 (2) : 5
URL: http://arcpe.modares.ac.ir/article-38-58923-en.html
1- Faculty member of Islamic Azad University of Varamin Pishva , sh.shahsavari@srbiau.ac.ir
2- PhD student in Chemical Engineering Varamin Pishva
3- Faculty member of Tehran Oil Industry Research Institute
4- Faculty member of the Department of Chemistry, Islamic Azad University of Varamin - Pishva, Tehran
5- Member of Chemical Engineering Faculty of Islamic Azad University of Varamin - Pishva Tehran
Abstract:   (1541 Views)
Abstract
Research subject: The combustion of fossil fuels to supply energy produces large amounts of carbon dioxide. Carbon dioxide emissions have led to rising global temperature and many natural disasters, including floods, hurricanes, rising sea levels, and widespread droughts, that threaten ecological systems and human life. Therefore, the uptake and removal of carbon dioxide from sources or the environment play a key role in countering the threat of global warming.
Research approach: In this study, a venturi scrubber was utilized to eliminate CO2 from the air stream on a semi-industrial scale. The effects of different parameters including inlet air flow rate to the venturi scrubber, solvent flow rate, and solvent loss during the scrubbing process were investigated on CO2 absorption by a nanofluid solvent containing iron oxide/water at the presence of tetramethylammonium hydroxide (TMAH) as a surface-active material.
Main results: The surface-active material of TMAH prevents the agglomeration of nanoparticles in the base fluid and stabilizes the fluid. The maximum efficiency of absorption and the highest molar flux of CO2 were achieved when iron oxide nanoparticles were used along with graphene nanosheets with the ratios of iron oxide nanoparticles (25%) and graphene nanosheets (75%) at the presence of TMAH surface-active material due to their nature. The reason is the better agitation (of the solution) by iron oxide nanoparticles that results in an increased displacement of graphene nanosheets. The random Brownian movements of nanoparticles create micron size eddies that increase mass transfer at the gas-liquid interface. In addition, molar flux and CO2 gas absorption efficiency decreased by increasing the concentration of nanoparticles.
Keywords: Hybrid nanofluid; Venturi scrubber; Gas absorption; Iron oxide nanoparticles; Graphene nanosheets

Article number: 5
Full-Text [PDF 554 kb]   (699 Downloads)    
Article Type: Original Research | Subject: mass-transport
Received: 2022/01/22 | Accepted: 2022/08/29 | Published: 2022/12/19

Add your comments about this article : Your username or Email:
CAPTCHA

Send email to the article author


Rights and permissions
Creative Commons License This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.