Subjects = Chemical Engineering (Transport Phenomena, Unit Operations, and Process Systems)
Chemical Engineering (Transport Phenomena, Unit Operations, and Process Systems)

A comprehensive review on the application of nanoparticles in the matrix of phase change materials to improve thermal properties for energy management and storage

Volume 7, Issue 4, Autumn 2023, Pages 63-93

Zahra Mohammadi, Nasrin Etesami, Faezeh Rostamian, Majid Haghgoo

Abstract Given the ever-increasing demand for energy and the limited nature of fossil fuel resources, improving energy efficiency and storage has become one of the most significant challenges facing humanity. Phase Change Materials (PCMs), substances capable of absorbing and releasing thermal energy at a constant temperature, have emerged as an innovative solution in the field of energy storage. With their high latent heat capacity, ability to maintain a stable temperature, and environmental friendliness, PCMs have great potential for applications in various industries. However, their low thermal conductivity, especially in organic PCMs, has hindered their widespread use. To address this challenge, researchers have been exploring various methods to enhance the thermal properties of PCMs. One of the most effective approaches involves incorporating high thermal conductivity nanoparticles into the PCM matrix. This research comprehensively reviews recent advancements in the preparation and applications of nanoparticle-enhanced phase change materials. It delves into various types of nanoparticles used, production methods for nanocomposites, the impact of nanoparticles on the thermal and mechanical properties of PCMs, the stabilization of nanocomposites with surfactants and surface modification, and also their potential applications in diverse industries. The results of this study indicate that the use of nanoparticles can significantly improve the thermal conductivity of PCMs, with carbon-based nanofillers showing the highest impact. Additionally, nanoparticles have led to a relative reduction in the phenomenon of supercooling in PCMs. Based on the results of numerous studies, nanoparticle-enhanced phase change materials hold great promise for improving the performance of energy storage systems, reducing energy consumption in various industries, and fostering the development of sustainable technologies. These nanocomposites can be employed in the construction, automotive, electronics, and textile industries to create more comfortable environments, enhance energy efficiency, and reduce greenhouse gas emissions. Continued research in this field is expected to lead to the development of even more efficient PCMs with a broader range of applications.

Chemical Engineering (Transport Phenomena, Unit Operations, and Process Systems)

Effect of Size of tire parts and Mazut Addition on Simultaneous Pyrolysis of Used Tire and Mazut

Volume 3, Issue 4, Winter 2020, Pages 13-24

Saman Alimohammadi, ramin Karimzadeh

Abstract Research subject: The use of scrap tires to recover energy and their compounds is an effective way to protect the environment and recover energy and materials.
Research approach: In this research, the aim is to investigate the process of tire pyrolysis as well as the simultaneous pyrolysis (co-pyrolysis) process of tire and fuel oil. Here, the effect of different operating conditions such as temperature, volumetric nitrogen gas, heating rate and tire parts size on the physical quantities and physical properties of the products manufactured by these processes have been investigated.
Main results: The optimal operating conditions for these experiments are 420C, the volumetric gas flow rate is 100 ml / min and the heating rate is 3 C / min. The volume of the reactor used is 500 ml and the amount of mazut in the coprolysis process is 30 wt%. The highest amount of liquid produced in the process of pyrolysis of used tire was achieved using feed with a particle size of 4×2×0.5cm3, which is 43.3% by weight. In contrast, the largest liquid product produced in the simultaneous pyrolysis process of the tire and mazut was obtained using tire parts with a size of 4×4×0.5cm3, which is 52.3% by weight. In this study, the physical properties of liquid products produced by two processes of pyrolysis of tire and co-pyrolysis of tire and mazut, such as kinematic viscosity, density and refractive index, have been investigated.

Chemical Engineering (Transport Phenomena, Unit Operations, and Process Systems)

Increase Heat Conductivity of Bladder and Calculate its Effect on Temperature Profile of the Tire in the Curing Process

Volume 3, Issue 3, Autumn 2019, Pages 93-105

mehdi shiva, Mohammad Lakhi, ahmad soleymani

Abstract In this study, the use of a mixed alumina and aluminum sulfate powder has been studied on thermal conductivity of butyl rubber filled with carbon black used as curing tire bladder composite. The aforementioned filler was added to 1.5 parts by weight in a blend of Bladder. The mixtures were prepared in the internal mixer and the curing characteristics, the mechanical and aging properties as well as the heat conductivity behavior of the composites were measured. To determine the coefficient of thermal diffusion of rubber composite, an immersion sampling method with specific dimensions in the oil bath and heat transfer computer simulation was used using a guessing and error approach. It was observed that the thermal diffusion coefficient of the above mixture rises from an average of 1×10-7 m2/s to an average of 1.3 ×10-7 m2/s without changing the mechanical and aging properties of the mixture. In the following, by choosing a simplified geometry from the tire profile in the near-tire curing conditions, and by simulating heat transfer behavior through the ABAQUS software, the effect of this increase on the thermal diffusivity coefficient was studied on the temperature variations of the inner parts of the tire. It was observed that the temperature of the different points of tire is affected by increasing the thermal conductivity of the tire, Therefore, there is a good potential for reducing the curing time of the tire.

Chemical Engineering (Transport Phenomena, Unit Operations, and Process Systems)

Experimental investigating the effect of adding of graphene on the improvement of convective heat transfer coefficient of water/ethylene glycol system in laminar flow

Volume 2, Issue 3, Winter 2019, Pages 3-19

Parisa Ebrahimduost, Hossein Baniasadi, Ahmad Ramazani S.A., Iman Akbari

Abstract One of the miniaturization of heat transfer equipment is enhancing the convective heat transfer coefficient. The main aim of this study is design and producing a kind of nanofluid based on water and ethylene glycol. Graphene was synthesized via electrochemical method and its successful production was confirmed with XRD, FTIR spectrum and, SEM and TEM images. By using different amount of graphene i.e. 0.25, 0.5, 0.75, 1, 1.25, and 1.5%, water/ethylene glycol/graphene nanofluid was produced. Sodium dodecyl sulfate (SDS) was used as surfactant to improve graphene stability in the base fluid. The designed experimental setup was composed of spiral tube with constant wall temperature and equipped with flow meter and pressure and temperature indicators. Nusselt number and pressure drop were measured for pure water and compared with those obtained from theoretical relations and it was found that the setup works properly. Convective heat transfer coefficient, Nusselt number, and heat transfer rate were investigated for water/ethylene glycol (60/40 wt.%) and nanofluid with different amount of graphene using experimental setup. The results showed that by adding 1 wt.% graphene into the based fluid the convective heat transfer coefficient increased about 50% while pressure drop was also increased about 50%. Overall, the findings of this research work support the potential of water/ethylene glycol/graphene nanofluid for using in heating/cooling equipment.